Lenco Autoglide Kit with GPS: Pros, Cons, Network Guide
Introduction
The Lenco Autoglide Kit with GPS and Network is revolutionizing marine performance by automating the trim tab control on your boat. Designed specifically for single actuator systems, this advanced trim tab controller combines real-time GPS input and NMEA 2000 network integration to maintain optimal boat attitude, enhance fuel efficiency, and improve safety on the water. Whether you’re cruising, fishing, or towing water sports, the system adjusts trim automatically — letting you focus on the experience.
From smoother rides to better visibility, the Lenco Autoglide Kit with GPS and Network adapts to all water conditions and boating speeds. It’s the ideal solution for modern boaters who demand performance, safety, and simplicity. Ready to discover what this tech-forward system can do for your vessel?
Overview / What Is Lenco Autoglide Kit
The Lenco Autoglide Kit with GPS and Network is a fully automated trim tab control system developed by Lenco Marine. Designed for boats with single actuator trim tab setups, this system uses accelerometers, a GPS module, and network communication to control trim tabs dynamically. The result? A hands-free, fuel-efficient, and smoother ride experience across varying sea conditions.
The system continuously monitors pitch, roll, and speed, making rapid adjustments to your trim tabs without manual input. Through GPS and NMEA 2000 integration, it synchronizes with your onboard electronics and instruments, offering real-time data and precise control. This kit is plug-and-play for many boat models, minimizing installation time while maximizing performance.
Key Features of Lenco Autoglide Kit with GPS and Network
- Compatible with single actuator trim tab systems
- Automatic pitch and roll correction based on boat speed and GPS
- Reduces fuel consumption and increases visibility
- Simple plug-and-play installation
- Integrated NMEA 2000 network communication
- Manual override available for custom trim settings
How to Install Lenco Autoglide Kit with GPS and Network
Installing the Lenco Autoglide Kit with GPS and Network is a relatively simple process for DIYers or professionals. The kit includes a main processor module, sensor unit, GPS antenna, and harness connections to your trim tabs and helm control panel. Most installations are completed within a few hours.
Mount the processor securely in a dry location and connect it to the existing actuator wiring. Install the GPS antenna where it has a clear view of the sky, usually on the dash or radar arch. Then connect the NMEA 2000 cable if you want to integrate the kit with your onboard network. Final calibration is done via the helm display.
Benefits of GPS-Integrated Trim Tab Automation
By leveraging GPS input, the system can fine-tune tab adjustments based on speed, direction, and acceleration. Here are a few advantages:
- Better fuel economy by maintaining optimal hull position
- Improved visibility at plane due to reduced bow rise
- Consistent ride height in rough waters
- Reduced operator workload during high-speed runs
This GPS-based approach eliminates over-trimming and under-trimming by reacting in real-time, far faster than manual inputs.
Maintenance Tips
Maintaining your Lenco Autoglide Kit with GPS and Network ensures long-term functionality and performance. Here are some tips to keep your system running smoothly:
- Inspect connections – Check the wiring harnesses periodically for corrosion or salt buildup.
- Clean the GPS antenna – Ensure there’s no debris covering the GPS module and that it has a clear line of sight.
- Update software – Check for firmware updates through Lenco’s support website or your marine dealer.
- Test calibration – Occasionally recalibrate pitch and roll settings, especially after hull modifications.
Keeping up with maintenance can significantly extend the lifespan and reliability of your Lenco Autoglide system.
Network Integration and NMEA 2000 Benefits
One of the standout features of the Lenco Autoglide Kit is its ability to communicate via the NMEA 2000 network. This allows it to seamlessly share data with chartplotters, GPS units, and other onboard electronics.
Benefits include:
- Real-time trim tab status displayed on multifunction displays (MFDs)
- Integrated performance data for smarter navigation
- Unified control via touchscreen interfaces
This makes your boat’s systems more cohesive and intuitive, especially when paired with modern marine engines from manufacturers like Yamaha Outboards.
Expert Advice and Pro Recommendations
Marine experts strongly recommend the Lenco Autoglide Kit with GPS and Network for boaters who often travel in varying sea conditions or want to reduce helm workload. It’s also ideal for fuel-conscious captains and those upgrading from manual trim systems.
Buy now: Lenco Autoglide Single Actuator Kit with GPS and Network – Use code WELCOME5 to get 5% off.
Detailed FAQ Section
What types of boats are compatible with the Lenco Autoglide Kit with GPS and Network?
The kit is designed for boats equipped with single actuator trim tab systems, which includes many mid-sized center consoles, sportfishing boats, cruisers, and runabouts. It is especially beneficial for boats with planing hulls that experience significant pitch changes. Before purchasing, verify the actuator type and wiring configuration to ensure compatibility. The system is versatile and works well across multiple brands and models.
How long does it take to install the Lenco Autoglide Kit?
Installation typically takes 2–4 hours depending on boat configuration and experience level. DIY installers with basic marine electrical skills can handle the process with the help of Lenco’s installation manual. Professional installers can complete it even faster, especially if the boat already has a compatible trim tab system in place. Make sure to test and calibrate the system after installation for optimal performance.
Can I override the automatic control and trim manually?
Yes, the Lenco Autoglide system includes a manual override feature. This allows you to take full control of your trim tabs whenever desired. The override is useful in scenarios where specific trim angles are required, such as balancing heavy loads or adjusting for side winds. Simply switch to manual mode via the control panel or MFD interface.
How does the system handle rough sea conditions?
The system continuously monitors your boat’s roll and pitch. In rough seas, it makes rapid adjustments to stabilize the vessel, improving comfort and safety. This is particularly helpful during long offshore runs or in choppy inlets. The GPS ensures that these adjustments are aligned with speed, direction, and acceleration data, providing an intelligent response in real-time.
Is this kit future-proof and upgradable?
Yes, the Lenco Autoglide Kit with GPS and Network is designed with scalability in mind. Firmware updates, NMEA 2000 compatibility, and modular architecture allow future upgrades. Lenco regularly releases software enhancements that can be applied via USB or Bluetooth-enabled tools (depending on the version). The system also supports additional sensors and advanced integrations with helm electronics.
Conclusion
The Lenco Autoglide Kit with GPS and Network offers a smart, hands-free solution for trimming your boat for peak performance. From enhancing fuel efficiency and safety to integrating with your electronics network, it’s a forward-thinking investment that transforms your boating experience. Whether you’re cruising, fishing, or heading offshore, this kit keeps your vessel level and efficient — no manual trim guesswork required.
Special Offer
WELCOME5 – Get 5% off storewide at allboatsupplies.com
🚀 Instant Assistance: Need help selecting the right product? Drop your contact in the chatbox at the bottom right corner, and our expert team will reply within 30 minutes with the best product suggestion for your boat — including a ready-to-use checkout link. We’re fast, knowledgeable, and always here for your boating needs!
No more guesswork — just message us and get a personalized checkout link for your antifouling system, fast!
Explore Our Best-Selling Ultrasonic Antifouling Products:
Buy now
Lenco Autoglide Single Actuator Kit with GPS and Network
Let us handle the hassle — expert support, quick replies, and smooth checkout. Your boat deserves the best.