Airmar SS175C 12d HW Raymarine CHIRP Review & Tips

Introduction

For serious offshore anglers and marine tech enthusiasts, the Airmar SS175C 12d HW Raymarine CHIRP with 11-Pin represents the pinnacle of sonar performance. Engineered to deliver exceptional detail, wide coverage, and unmatched clarity, this transducer is tailored specifically for Raymarine systems via its 11-pin connector. Built for vessels with a deadrise of 16° to 24°, its 12-degree tilt ensures optimal beam alignment and precise bottom readings—even at high speeds or challenging depths.

Featuring High-Wide (HW) CHIRP capabilities, it operates in the 150–250 kHz frequency range, offering better target separation and broader beamwidth than traditional sonar units. Whether you’re locating bait pods or targeting trophy pelagics, this thru-hull unit ensures your Raymarine system sees it all with pinpoint accuracy.

Overview / What Is Airmar SS175C 12d HW Raymarine CHIRP with 11-Pin

The Airmar SS175C 12d HW Raymarine CHIRP with 11-Pin is a stainless steel, thru-hull CHIRP transducer optimized for use with Raymarine sonar displays via the pre-attached 11-pin connector. It provides ultra-clear returns with an extra-wide beam, ideal for high-speed, deep-water fishing or structure scanning.

Unlike traditional single-frequency transducers, this model sends out a sweep of frequencies within the 150-250 kHz range. The result is better detail, higher sensitivity, and the ability to differentiate fish targets even when they’re close together. The built-in tilt of 12 degrees compensates for the deadrise angle of the hull, allowing a more direct beam path and eliminating the need for fairing blocks.

Top Benefits of Using Airmar SS175C 12d HW Raymarine CHIRP

• High-Wide CHIRP: Covers a wide cone angle with crisp detail from top to bottom.
• Depth Rating: Tracks to 600 feet (183 meters) with clean returns.
• Tilted Element: 12-degree internal tilt for hulls with 16–24° deadrise.
• Raymarine Compatibility: 11-pin connector simplifies plug-and-play with Raymarine Axiom and CP470/CP570 units.
• Durable Construction: Solid stainless steel housing resists corrosion and marine wear.

Understanding CHIRP with Raymarine Integration

One of the standout features of the Airmar SS175C 12d HW Raymarine CHIRP is its seamless compatibility with Raymarine sonar systems. Thanks to the dedicated 11-pin connector, installation becomes straightforward for Raymarine Axiom, Element, and legacy systems that support CHIRP technology.

CHIRP—Compressed High-Intensity Radiated Pulse—operates by emitting a frequency range rather than a single tone. This delivers high-resolution images and enhanced target separation. With the HW (High-Wide) model, you also gain broad coverage, perfect for finding bait schools or detecting bottom-hugging game fish. The wide beam translates to faster scanning and broader underwater awareness, especially useful when trolling or drifting.

How to Install Airmar SS175C 12d HW Raymarine CHIRP

Installing the Airmar SS175C 12d HW Raymarine CHIRP with 11-Pin is relatively straightforward but requires attention to hull design and cabling practices. Here’s a basic overview:

1. Select Location: Mount the transducer close to the keel, away from turbulence sources like intakes or strakes.
2. Deadrise Match: Ensure the 12° tilt is suitable for your hull angle (16–24° deadrise).
3. Mounting: Use marine-grade sealant and ensure flush contact with the hull surface. Tighten the locknut securely.
4. Plug & Play: Connect the 11-pin cable directly to your Raymarine CHIRP-compatible sonar module or MFD.

For advanced wiring, especially in multiple-display setups, professional installation is advised to maximize performance and minimize electrical interference.

Maintenance Tips

Routine maintenance of the Airmar SS175C 12d HW Raymarine CHIRP ensures longevity and signal integrity. Follow these tips:

• Monthly Cleaning: Use a non-abrasive sponge or soft brush to gently remove biofouling and grime.
• Inspect Cabling: Check for abrasions, corrosion, or pin damage on the 11-pin connector during dry dock sessions.
• Avoid Harsh Chemicals: Never use solvents or strong detergents on the stainless steel housing.
• Protective Coating: Apply a light coat of antifouling paint (compatible with transducers) to reduce marine growth.

Troubleshooting Airmar SS175C 12d HW Raymarine CHIRP Issues

Even with high-end technology, occasional issues may arise. Here’s how to handle common problems with the Airmar SS175C 12d HW Raymarine CHIRP:

Loss of Signal: Check connector pins for corrosion or loose fit. Clean contacts and ensure firm seating into the sonar unit. Reboot the Raymarine display.

Poor Image Quality: Check transducer location and angle. If it’s mounted too far off center or near a strake, it may experience cavitation. Relocate if necessary. Also, update Raymarine software for optimal performance.

Expert Advice and Pro Recommendations

If you’re an angler who frequently targets bottom species like grouper, snapper, or halibut, the Airmar SS175C 12d HW Raymarine CHIRP will give you a critical edge. Its high frequency delivers detailed returns, allowing you to distinguish fish close to the seafloor.

Professionals also recommend pairing this unit with the Raymarine CP570 sonar module for unmatched deep-water performance. Whether you’re trolling offshore or jigging around wrecks, this combo ensures high-definition feedback. For even better decision-making, consult with marine specialists at Yamaha Outboards.

Buy now and use code WELCOME5 for 5% off: Airmar SS175C-12-HW 12d Tilt High Wide CHIRP with Raymarine 11-Pin

Detailed FAQ Section

Is the Airmar SS175C 12d HW Raymarine CHIRP plug-and-play?

Yes, it features an 11-pin connector designed specifically for Raymarine systems. This makes it essentially plug-and-play for compatible displays such as the Raymarine Axiom series, CP470/CP570, and legacy CHIRP-capable models. Installation involves securing the unit thru-hull and connecting the cable to the sonar module. No adaptors or conversion kits are required. However, be sure your system supports high-wide CHIRP transducers for full compatibility.

How does the 12-degree tilt help during installation?

The 12° tilt matches the hull angle (deadrise) of most offshore vessels. This internal angle allows the sonar beam to exit perpendicular to the seafloor, resulting in accurate bottom readings and minimal signal distortion. Without this tilt, you’d have to use external fairing blocks or risk receiving skewed data at higher speeds or in rough waters. This design reduces drag and simplifies the mounting process.

What sonar range can I expect from the Airmar SS175C 12d HW Raymarine CHIRP?

With its 600-foot depth capability and 150–250 kHz CHIRP frequency range, the transducer provides exceptional coverage for mid-to-deep water fishing. The high-wide configuration offers a 25° average beamwidth, making it great for scanning wider zones. This combination is optimal for structure fishing, bait detection, and pelagic species tracking. Paired with the Raymarine CP570, many anglers report clear returns at speeds exceeding 25 knots.

How does CHIRP improve my sonar performance compared to traditional sonar?

Traditional sonar sends out a single frequency and receives a single return. CHIRP (Compressed High-Intensity Radiated Pulse) emits a range of frequencies in every ping. This improves resolution, reduces clutter, and provides clearer separation between objects. You’ll be able to tell the difference between closely spaced fish or distinguish a fish sitting just above a rock. The Airmar SS175C 12d HW Raymarine CHIRP maximizes this with its wide beam and high sensitivity.

What maintenance schedule should I follow for this transducer?

We recommend inspecting the transducer monthly, especially during peak boating seasons. Clean marine growth using a soft cloth and warm water. Check the 11-pin connector for corrosion. During off-season storage, unplug and cap the connector, and inspect the hull fitting for tightness and integrity. Annual dry dock inspections should also include checking for electrolysis or potential pitting in the stainless steel housing.

Conclusion

The Airmar SS175C 12d HW Raymarine CHIRP with 11-Pin is a premium transducer that offers unmatched sonar clarity, wide scanning range, and ease of integration with Raymarine systems. Built with durability in mind and optimized for performance at speed and depth, it’s the go-to solution for advanced marine navigation and offshore fishing.

If you’re serious about finding more fish and navigating with confidence, this unit deserves a place on your vessel.

Special Offer

WELCOME5 – Get 5% off storewide at allboatsupplies.com

🚀 Instant Assistance: Need help selecting the right product? Drop your contact in the chatbox at the bottom right corner, and our expert team will reply within 30 minutes with the best product suggestion for your boat — including a ready-to-use checkout link. We’re fast, knowledgeable, and always here for your boating needs!

No more guesswork — just message us and get a personalized checkout link for your antifouling system, fast!

Explore Our Best-Selling Ultrasonic Antifouling Products:

Buy now

Airmar SS175C-12-HW 12d Tilt High Wide CHIRP with Raymarine 11-Pin

Let us handle the hassle — expert support, quick replies, and smooth checkout. Your boat deserves the best.