Lexor – Evinrude/Johnson/OMC (15.75 x 15″) Solas RH Propeller, 2571-158-15
Introduction
The Lexor – Evinrude/Johnson/OMC (15.75 × 15″) Solas RH Propeller, 2571‑158‑15 is a purpose-built, stainless steel right‑hand propeller designed specifically for Evinrude, Johnson, and OMC outboard engines. This high-performance Lexor Evinrude propeller marine product delivers improved acceleration, fuel efficiency, and durability compared to aluminum models. In this guide, we’ll cover every aspect of the 15.75 × 15″ RH prop: how to install, maintain, troubleshoot, and choose the best options. For those ready to upgrade, this Lexor Evinrude propeller marine choice offers unmatched propulsion and value.
Overview / What Is Lexor Evinrude Propeller Marine
The Lexor – Evinrude/Johnson/OMC 2571‑158‑15 is part of the Solas Lexor series, engineered for right-hand rotation outboards in the 115 HP to 200 HP range. With a diameter of 15.75 in and a 15 in pitch, this propeller balances torque, speed, and efficiency. Made of premium stainless steel, it resists corrosion, warping, and cavitation for prolonged marine use.
It’s ideal for boaters seeking reliable thrust and smooth performance across varied water conditions. The Lexor design emphasizes blade curvature and cupping, enhancing lift and reducing slippage. This model addresses common questions like “how to install Lexor Evinrude propeller marine” or “best Lexor Evinrude propeller options” with practical functionality.
Installation Guide: How to Install Lexor Evinrude Propeller Marine
Installing the 2571‑158‑15 correctly is essential for unlocking its full potential. Follow these steps carefully:
- Ensure engine is switched off and propeller shaft is stationary.
- Remove the existing propeller by loosening the retaining nut and pulling it off the shaft.
- Inspect the driveshaft spline and hub for debris or damage.
- Apply marine-grade grease to the shaft to facilitate easy removal/installation and prevent corrosion.
- Slide the Lexor propeller onto the splined shaft, aligning with the keyway.
- Install the thrust washer, spacer (if applicable), and nut. Torque to manufacturer specifications.
- Spin the prop by hand to verify smooth rotation without binding.
Correct installation prevents vibration, cavitation, and poor performance. Always use new hardware if the old nut or cotter pin shows wear. Improper fit increases wear and reduces fuel economy.
Technical Features and Benefits of 2571‑158‑15
This Lexor Evinrude propeller marine model stands out for:
- Stainless Steel Construction: Highly resilient, thinner blades boost lift and speed.
- Blade Geometry: High rake and cupped trailing edge reduce ventilation and improve top-end lift.
- Right-Hand Rotation (RH): Designed for single-engine or RH-configured setups.
- Optimized Pitch: 15″ pitch balances acceleration with fuel-efficient cruising speeds.
- Compatibility: Fits most Evinrude, Johnson, OMC outboards in the specified HP range.
These features translate into tangible benefits: quicker planing, smoother throttle response, and consistent speed even under load.
How to Choose Best Lexor Evinrude Propeller Options
Choosing the right Lexor propeller depends on your boat’s size, load, and usage. Here’s how to select wisely:
- Engine HP Range: Confirm compatibility with 115–200 HP engines.
- Boat Weight & Load: Heavily loaded vessels may benefit from lower pitch.
- Primary Use: Fishing/hunting (better acceleration) vs. cruising (higher top-end speed).
- Water Conditions: Rough or choppy waters demand stronger blade lift.
Lexor includes a variety of prop models across different pitch and diameter combinations. For customers comparing cost and durability or troubleshooting performance, this model often emerges as one of the best Lexor Evinrude propeller options.
Maintenance Tips
Maintaining your Lexor Evinrude propeller marine is vital for optimal operation. Here are key practices:
- Inspect blades after every outing for nicks, dings, or warping.
- Rinse thoroughly with fresh water—especially after saltwater use.
- Grease the splined shaft before (re)installation to prevent corrosion.
- Store engine off the water to avoid constantly immersing the propeller.
- Seasonal service should include shaft inspection and torque check of the nut.
Following these Lexor Evinrude propeller maintenance tips will extend prop lifespan and maintain fuel efficiency over years of use.
Troubleshooting Common Issues
User concerns often include cavitation, vibration, or loss of performance. Common troubleshooting steps include:
- Blade damage: even small nicks can disrupt flow—consider professional smoothing.
- Poor trim or engine tilt affecting alignment and causing load issues.
- Incorrect pitch or diameter causing over-revving or underperformance.
- Hub slip: worn hub may spin under load—inspect hub rubber and replace when worn.
By diagnosing based on symptoms (e.g., engine revving high but speed low), you can test alternate pitch sizes or re-assess installation. If you’re trying to repair Lexor Evinrude propeller marine issues, start with alignment and blade integrity checks.
Expert Advice and Pro Recommendations
Marine professionals consistently recommend the Lexor 2571‑158‑15 for its robust design and reliable performance in both saltwater and freshwater environments. Its stainless steel build and refined blade geometry make it a top choice among serious boaters.
Buy now: Lexor – Evinrude/Johnson/OMC (15.75 x 15″) Solas RH Propeller, 2571-158-15 and use code WELCOME5 to get 5% off.
Detailed FAQ Section
Is the Lexor Evinrude/Johnson/OMC 2571‑158‑15 propeller compatible with my engine model?
Compatibility depends on your engine series and HP rating. The 2571‑158‑15 is designed for Evinrude, Johnson, and OMC outboards commonly rated between 115 HP and 200 HP. Before installing, verify your engine’s shaft size, splined interface, and rotation direction through the manufacturer’s manual or product guide. If your engine’s specifications differ in pitch or rotation (e.g. left‑hand vs right‑hand), choose a different Lexor model. Always cross-check the 2571‑158‑15 against OEM part recommendations to ensure proper fit and performance.
How do I determine the right pitch for my boat?
The 15″ pitch is optimized for mid‑range power and mixed use. If you cook slow acceleration and stronger low‑end thrust for heavily loaded boats—such as when towing or carrying gear—a lower pitch may serve better. Conversely, if you focus on high‑speed cruising with minimal load, a higher pitch (e.g. 17″ or 19″) could improve top speed but may reduce acceleration. The Lexor Evinrude propeller marine line includes multiple options; match your typical boating scenario and test performance differences while monitoring RPM at wide‑open throttle to stay within engine limits.
How long will this stainless steel propeller last with proper care?
Built from corrosion‑resistant stainless steel, the Lexor 2571‑158‑15 has a life expectancy of 8‑12 years with regular upkeep. That includes rinsing after saltwater use, greasing the shaft before installation, visual inspections, and servicing the mounting hardware. Avoid ground strikes or underwater obstructions that can damage blades. Even minor dings can affect efficiency and should be repaired promptly. With proper maintenance, this Lexor Evinrude propeller marine prop can outperform stock aluminum units by years.
Can I repair bent or damaged blades myself?
Minor blade damage—such as small dings or scratches—can sometimes be smoothed by a professional marine prop technician. They use precision grinders to restore pitch and balance. Attempting DIY repairs without proper tools and measurement can unbalance the propeller, leading to vibration, shaft strain, or engine wear. For significant damage or imbalance, replacement is recommended. Using certified marine service providers ensures the restored blade geometry meets design specifications for the 2571‑158‑15 model.
What improvements in fuel economy and speed can I expect?
Compared to OEM aluminum propellers, upgrading to the Lexor 2571‑158‑15 often yields noticeable gains. Boaters typically report smoother acceleration, lower RPM at cruise, and better fuel burn at steady throttle. The stainless design transfers engine power more efficiently into thrust, reducing drag and cavitation. In real-world use, fuel savings can range from 5–15%, depending on load and conditions. Speed improvement may be up to 1–2 knots at similar RPM. Track performance before and after installation to measure benefits precisely.
Conclusion
The Lexor ‑ Evinrude/Johnson/OMC (15.75 × 15″) Solas RH Propeller, 2571‑158‑15 is an outstanding choice for boat owners seeking durability, speed, and efficiency on mid‑range outboard engines. Backed by smart blade design and stainless steel strength, it delivers reliable performance across varied marine environments. With proper installation, maintenance, and setup, it’s one of the best Lexor Evinrude propeller marine options available.
Special Offer
WELCOME5 – Get 5% off storewide at allboatsupplies.com
🚀 Instant Assistance: Need help selecting the right product? Drop your contact in the chatbox at the bottom right corner, and our expert team will reply within 30 minutes with the best product suggestion for your boat — including a ready‑to‑use checkout link. We’re fast, knowledgeable, and always here for your boating needs!
No more guesswork — just message us and get a personalized checkout link for your antifouling system, fast!
Explore Our Best-Selling Ultrasonic Antifouling Products:
Buy now
Lexor – Evinrude/Johnson/OMC (15.75 x 15″) Solas RH Propeller, 2571‑158‑15
Let us handle the hassle — expert support, quick replies, and smooth checkout. Your boat deserves the best.
Read More
For more helpful marine maintenance guides, check out our article on Lexor – Honda (14.75 x 23″) Solas LH Propeller, 1572-148-23.