Saturn – Mercury (9.25 x 7″) Solas RH Propeller, 1121-093-07

Introduction

The Saturn – Mercury (9.25 x 7″) Solas RH Propeller, 1121-093-07 is a premium stainless steel propeller designed for Mercury outboard engines that demand reliability, strength, and peak performance on the water. Built by Solas, a leading name in marine propulsion, this propeller combines durable materials with precision engineering to deliver outstanding thrust, fuel efficiency, and smooth handling.

With its 9.25-inch diameter and 7-inch pitch, the Saturn propeller is ideal for smaller to medium-sized boats where acceleration and maneuverability are crucial. Whether you are fishing, cruising, or towing, this right-hand (RH) rotation propeller will maximize your engine’s power output with minimal vibration and noise.

Overview / What Is Saturn – Mercury (9.25 x 7″) Solas RH Propeller?

The Saturn – Mercury (9.25 x 7″) Solas RH Propeller is a stainless steel marine propeller engineered to fit Mercury outboard motors requiring a right-hand rotation. It offers enhanced durability over aluminum props and excels in delivering thrust efficiency and responsiveness in various boating conditions.

This propeller is part of the Saturn series, well-regarded for its high-performance stainless steel blades, which resist corrosion, wear, and impact damage. The 9.25-inch diameter and 7-inch pitch make it suitable for applications where precise control and acceleration are vital.

Key Areas Covered in This Article

• How to properly install the Saturn – Mercury Solas RH Propeller
• Maintenance tips to keep your propeller in prime condition
• Expert recommendations for optimal performance
• Detailed answers to common questions about the Saturn propeller

How to Install the Saturn – Mercury (9.25 x 7″) Solas RH Propeller

Installing the Saturn propeller correctly is essential to ensure maximum efficiency and prevent premature wear or damage. Before installation, make sure the engine is off and the boat is securely moored.

Start by removing the old propeller by loosening the prop nut and sliding it off the propeller shaft. Inspect the shaft and keyway for any debris or damage. Next, slide the Saturn propeller onto the shaft, ensuring the splines align perfectly.

Replace the thrust washer and tighten the prop nut to the torque specifications recommended by Mercury. Insert a new cotter pin or locking mechanism to secure the propeller in place. After installation, rotate the propeller by hand to check for smooth movement and absence of obstructions.

Maintenance Tips for Saturn – Mercury Solas RH Propeller

Routine maintenance is crucial to extend the life of your Saturn propeller and maintain peak marine performance. After every trip, rinse the propeller with fresh water to remove salt, dirt, and marine growth that can accelerate corrosion and wear.

Regularly inspect the blades for nicks, bends, or cracks that may affect performance. Minor damage can cause vibrations or decreased fuel efficiency. Lubricate the propeller shaft and splines periodically with marine-grade grease to prevent seizing.

• Check and tighten the prop nut regularly to avoid loosening during operation.
• Remove any fishing line or debris wrapped around the propeller shaft immediately.
• Store the boat and propeller in a dry place when not in use for extended periods.
• Use anti-corrosion sprays specifically designed for stainless steel marine parts.

Expert Advice and Pro Recommendations

Experts recommend the Saturn – Mercury (9.25 x 7″) Solas RH Propeller for boaters who prioritize strength, longevity, and high responsiveness. The stainless steel construction offers superior durability compared to aluminum alternatives, making it ideal for harsh saltwater conditions or rugged use.

Choosing the right pitch and diameter, such as the 9.25 x 7 size, ensures your engine runs within its optimal RPM range, improving fuel efficiency and preventing engine strain. Always consult your Mercury engine manual or a marine technician before changing propellers.

Buy now: Saturn – Mercury (9.25 x 7″) Solas RH Propeller, 1121-093-07 and use code WELCOME5 for a 5% discount!

Signs Your Saturn – Mercury Propeller Needs Repair or Replacement

Understanding when to repair or replace your propeller is key to avoiding performance loss or engine damage. Common signs include unusual vibrations, decreased acceleration, loss of top speed, or increased fuel consumption.

Visual inspection can reveal bent blades, corrosion, cracks, or gouges that compromise the propeller’s efficiency. If you experience any of these symptoms, it’s important to address the issue promptly to maintain safety and performance.

Cost and Durability: Why Choose the Saturn Stainless Steel Propeller?

The upfront cost of a stainless steel propeller like the Saturn is typically higher than aluminum models, but the investment pays off through extended durability and reduced maintenance. Stainless steel resists impacts better and is less prone to corrosion in saltwater environments.

This durability translates to longer intervals between replacements and better long-term value. Many professional boaters and serious enthusiasts prefer stainless steel for its strength and reliable performance even under demanding conditions.

Detailed FAQ Section

How do I know if the Saturn – Mercury (9.25 x 7″) Solas RH Propeller fits my engine?

The Saturn – Mercury (9.25 x 7″) Solas RH Propeller is designed specifically for Mercury outboard engines that require a right-hand rotation propeller with a 9.25-inch diameter and 7-inch pitch. To confirm compatibility, check your engine’s manual or existing propeller specifications. Matching the rotation direction, diameter, and pitch is essential for optimal performance. If you’re unsure, contact marine experts or visit allboatsupplies.com for personalized advice and fitment support.

What maintenance does the Saturn stainless steel propeller require?

Maintaining your Saturn stainless steel propeller involves regular cleaning and inspection. After each use, rinse it with fresh water to remove salt and debris, which can accelerate corrosion. Inspect the blades for damage such as dents, bends, or cracks. Periodically lubricate the propeller shaft and splines to prevent seizing and ensure smooth operation. Tighten the prop nut regularly and replace any worn components like cotter pins. Proper storage, away from prolonged moisture exposure, further extends the propeller’s lifespan.

Can minor damage to the Saturn propeller be repaired, or should it be replaced?

Minor damages like small dings or scratches can often be repaired by smoothing or filing the affected areas to restore blade balance and performance. However, severe damage such as bent or cracked blades requires professional repair or full replacement to avoid vibrations, loss of speed, or engine stress. Using a damaged propeller can lead to more costly engine repairs, so prompt inspection and corrective action are vital for safe boating.

How does the 7-inch pitch impact the performance of this propeller?

The 7-inch pitch of the Saturn propeller means that theoretically, the boat moves forward 7 inches per one full revolution of the propeller. This pitch size is designed to provide good acceleration and responsiveness for smaller boats or engines operating in a moderate power range. A lower pitch like this offers better hole shot and maneuverability but may limit top-end speed compared to higher pitch propellers. Choosing the correct pitch ensures the engine operates within its ideal RPM range, balancing speed and fuel efficiency.

Why choose a stainless steel propeller over aluminum?

Stainless steel propellers like the Saturn model offer superior strength and durability compared to aluminum ones. They withstand impacts and corrosion better, making them ideal for saltwater and rugged boating conditions. Stainless steel also maintains blade shape longer, ensuring consistent performance over time. While aluminum props are lighter and less expensive, stainless steel’s enhanced longevity and reliability provide better long-term value for serious boaters.

Conclusion

The Saturn – Mercury (9.25 x 7″) Solas RH Propeller, 1121-093-07 is an excellent choice for boaters seeking a durable, high-performance stainless steel propeller compatible with Mercury outboards. Its precise engineering, corrosion-resistant material, and well-balanced dimensions make it suitable for various marine applications requiring speed, control, and reliability.

With proper installation and maintenance, this propeller will deliver smooth operation and maximize your engine’s power output. For those wanting to upgrade from aluminum or OEM props, the Saturn series offers impressive value and longevity backed by the trusted Solas brand.

Special Offer

WELCOME5 – Get 5% off storewide at allboatsupplies.com

🚀 Instant Assistance: Need help selecting the right product? Drop your contact in the chatbox at the bottom right corner, and our expert team will reply within 30 minutes with the best product suggestion for your boat — including a ready-to-use checkout link. We’re fast, knowledgeable, and always here for your boating needs!

No more guesswork — just message us and get a personalized checkout link for your antifouling system, fast!

Explore Our Best-Selling Ultrasonic Antifouling Products:

Buy now

Saturn – Mercury (9.25 x 7″) Solas RH Propeller, 1121-093-07

Let us handle the hassle — expert support, quick replies, and smooth checkout. Your boat deserves the best.

Read More

For more helpful marine maintenance guides, check out our article on Amita 4 – Suzuki (14 x 21″) Solas RH Propeller, 4513-140-21.