Amita 3 – Honda (14 x 9″) Solas RH Propeller, 6411-140-09
Introduction
The Amita 3 – Honda (14 x 9″) Solas RH Propeller, 6411-140-09 is a premium-grade marine propeller designed specifically for Honda outboard engines. Crafted by Solas, one of the most trusted brands in the marine propulsion industry, this propeller stands out for its unmatched performance, durability, and efficiency on the water. Whether you’re a weekend fisherman, a boating enthusiast, or a professional operator, the Amita 3 offers the smooth acceleration and top-speed stability you need in every marine condition.
With its three-blade design and aluminum construction, this propeller delivers optimal thrust and minimal cavitation. Its carefully engineered pitch and diameter ratio ensure ideal performance with 4-stroke Honda engines. The 6411-140-09 is not just a propeller — it’s a power upgrade for your marine engine.
Overview / What Is Amita 3 – Honda (14 x 9″) Solas RH Propeller?
The Amita 3 is a high-quality aluminum propeller manufactured by Solas, tailored for Honda outboards. With dimensions of 14 x 9 inches, this right-hand rotating prop is ideal for smaller boats and moderate engine capacities. It’s part of the Amita 3 series known for its precision casting, corrosion-resistant finish, and advanced performance under variable marine loads.
Model number 6411-140-09 is built to deliver enhanced acceleration, better fuel efficiency, and smoother ride dynamics, especially in rougher waters. Boaters consistently report improved hole shot and quicker planing after upgrading to this model.
Technical Features and Performance Benefits
Key performance highlights of the Amita 3 Honda propeller include:
- Blade Design: 3-blade configuration ensures a balance of top speed and acceleration.
- Material: Aluminum with anti-corrosion paint – lightweight yet tough.
- Rotation: Right-hand (RH) for optimal compatibility with standard outboard setups.
- Pitch/Diameter: 14-inch diameter and 9-inch pitch provide high torque at lower RPMs.
- Durability: Special baked-on powder coating protects against saltwater corrosion.
These features make this propeller one of the best options for recreational boats, small fishing vessels, and light commercial crafts using Honda motors.
How to Install the Amita 3 Honda Propeller
Installing the Amita 3 propeller is straightforward and can be done with basic tools. Before beginning, ensure your boat is on a trailer or lift. Remove the cotter pin and propeller nut from the old unit. Slide the old propeller off the shaft, clean any debris, and inspect the spline for wear. Then align the new propeller’s hub with the spline and slide it on carefully.
Replace the thrust washer, prop nut, and cotter pin. Be sure not to over-tighten — follow your outboard’s torque specifications. Lastly, spin the propeller manually to ensure there’s no binding or interference. For a visual guide, consult the Honda or Solas installation manuals or a certified marine mechanic.
Best Amita 3 Honda Propeller Options Compared
While the 14 x 9” model is ideal for low-speed torque and acceleration, Solas offers other variations in the Amita 3 series:
- 13.75 x 13”: Best for mid-range cruising and fuel efficiency.
- 14 x 11”: Suited for balanced performance and slightly heavier boats.
- 13.25 x 17”: A high-speed propeller optimized for lightweight hulls.
Each propeller in the Amita 3 lineup is designed to maximize different aspects of performance, depending on your boating style and engine type.
Maintenance Tips
To extend the life of your Amita 3 Honda (14 x 9″) Solas RH Propeller, routine maintenance is essential. Always inspect the propeller before and after every trip. Check for dents, dings, and cracks on the blades. Even minor imperfections can cause vibrations and decrease efficiency.
Keep the propeller free from entangled debris like fishing line or seaweed. After saltwater use, rinse the entire lower unit and propeller area with fresh water. Periodically remove the propeller to check for fishing lines wrapped around the shaft, and apply marine grease to the spline. Lastly, store your boat in a dry, covered area when not in use.
How to Troubleshoot Amita 3 Honda Propeller Issues
If you’re experiencing vibrations, slipping, or reduced top speed, it could indicate propeller issues. Start by checking for visible damage or bent blades. A misaligned or chipped blade can lead to cavitation, which reduces thrust and increases engine stress.
Other common issues include:
- Hub Spinning: If the hub inside the propeller is slipping, the prop may spin without moving the boat. This requires repair or replacement.
- Cavitation Burn: Caused by water vapor bubbles collapsing and damaging the prop surface.
- Incorrect Pitch: Using a pitch that doesn’t match your engine’s RPM range can hinder performance.
Addressing these promptly with professional help or a replacement can protect your engine and restore peak performance.
Expert Advice and Pro Recommendations
Marine experts recommend matching the propeller’s specifications to your boat’s weight, engine horsepower, and intended use. The Amita 3 Honda 14×9 RH Propeller is often recommended for pontoon boats, small fishing boats, and other utility vessels where acceleration and low-end power are priorities.
Buy now: Amita 3 – Honda (14 x 9″) Solas RH Propeller, 6411-140-09 and use coupon code WELCOME5 for 5% off.
Detailed FAQ Section
Is the Amita 3 Honda (14 x 9″) propeller compatible with all Honda outboards?
This propeller is specifically designed for select Honda 4-stroke outboards ranging from 40HP to 60HP. Always consult your engine manual or check with your marine parts supplier to confirm compatibility before purchasing. The Solas part number 6411-140-09 is engineered for a standard 13-tooth spline that matches many Honda models. For older engines or custom setups, an adapter kit may be necessary.
What is the difference between right-hand and left-hand propellers?
Right-hand (RH) propellers rotate clockwise when viewed from the rear. They are the most commonly used type on single-outboard setups. Left-hand (LH) props are used in twin-engine configurations or when specific hull performance demands it. The Amita 3 Honda (14 x 9″) Solas is a right-hand model ideal for standard installations. Using the wrong rotation can significantly impact performance and handling.
How often should I replace my Amita 3 propeller?
With proper maintenance, aluminum propellers like the Amita 3 can last several seasons. However, if you frequently boat in shallow or debris-heavy waters, inspect the propeller regularly for wear and replace it as needed. Signs that replacement is necessary include bent blades, loss of performance, increased vibration, and visible hub damage. It’s advisable to keep a spare onboard for emergencies.
Can I repair minor damage on the Amita 3 Honda propeller?
Minor dings and small nicks on the blade edge can sometimes be smoothed out using a metal file or by a professional propeller repair shop. However, cracks, large dents, or hub damage require replacement. Never attempt DIY repairs on structural cracks, as it compromises the safety of your entire propulsion system. If you’re unsure, seek expert evaluation from a certified marine technician.
Does the Amita 3 propeller improve fuel efficiency?
Yes. The blade design and pitch of the Amita 3 propeller are engineered to optimize fuel economy by minimizing drag and maximizing thrust. Proper pitch selection based on your engine and load can reduce RPM requirements at cruising speeds, leading to better fuel consumption. Many users report noticeable savings after switching to this model, especially when replacing old or damaged props.
Conclusion
The Amita 3 – Honda (14 x 9″) Solas RH Propeller, 6411-140-09 offers exceptional reliability, performance, and value for boat owners. With its corrosion-resistant build and precision-engineered blades, this propeller transforms your Honda outboard into a smoother, more responsive engine system. Whether you’re replacing a worn-out prop or upgrading for better performance, this model is a top-tier choice in marine propulsion.
Special Offer
WELCOME5 – Get 5% off storewide at allboatsupplies.com
🚀 Instant Assistance: Need help selecting the right product? Drop your contact in the chatbox at the bottom right corner, and our expert team will reply within 30 minutes with the best product suggestion for your boat — including a ready-to-use checkout link. We’re fast, knowledgeable, and always here for your boating needs!
No more guesswork — just message us and get a personalized checkout link for your antifouling system, fast!
Explore Our Best-Selling Ultrasonic Antifouling Products:
Buy now
Amita 3 – Honda (14 x 9″) Solas RH Propeller, 6411-140-09
Let us handle the hassle — expert support, quick replies, and smooth checkout. Your boat deserves the best.
Read More
For more helpful marine maintenance guides, check out our article on Amita 3 – Suzuki (13.2 x 21″) Solas RH Propeller, 4411-132-21.