Amita 3 – Honda (13 x 19″) Solas RH Propeller, 6411-130-19
Introduction
If you’re searching for unmatched performance, durability, and efficiency in your boat’s propulsion system, the Amita 3 – Honda (13 x 19″) Solas RH Propeller, 6411-130-19 is a premium option for boating enthusiasts and professionals alike. Engineered with precision and reliability, this Honda 13×19 propeller marine solution is ideal for a range of outboard engines and is known for its high-grade aluminum construction, corrosion resistance, and perfect balance.
This right-hand (RH) propeller is designed to optimize speed, thrust, and fuel economy — all while ensuring smooth and quiet operation, making it a go-to solution for both recreational boaters and commercial marine operators.
Overview / What Is the Honda 13×19 Propeller Marine
The Amita 3 – Honda 13 x 19” Solas RH Propeller is an OEM replacement-grade marine propeller built specifically for Honda outboard engines. With a diameter of 13 inches and a pitch of 19 inches, this propeller is tailored to optimize the balance between acceleration and top-end speed for boats that demand a performance edge.
Constructed from high-strength, squeeze-cast aluminum, it is designed to resist corrosion in saltwater and freshwater environments. The three-blade design enhances hydrodynamics and ensures stable steering and reduced cavitation. It fits a range of 75HP–130HP Honda outboards, making it highly versatile.
Key Features of the Amita 3 13×19 Solas Propeller
Below are some standout features that make this product a favorite among marine enthusiasts:
- Material: Corrosion-resistant, squeeze-cast aluminum
- Design: 3-blade configuration for better acceleration and balance
- Fitment: Compatible with Honda 75-130 HP outboard motors
- Diameter x Pitch: 13 x 19 inches
- Right-Hand Rotation: Designed for boats using RH propeller systems
- OEM Grade: Reliable aftermarket replacement option
With its cutting-edge hydrodynamic design, the Honda 13×19 propeller marine guarantees enhanced control, reduced drag, and long-term value.
How to Install a Honda 13×19 Propeller
Installing the Amita 3 Solas propeller is a straightforward process that can be done with basic tools. Here’s a simplified step-by-step guide:
- Ensure your engine is turned off and the battery is disconnected.
- Remove the cotter pin and unscrew the prop nut with a wrench.
- Slide the old propeller off the shaft. Check for fishing line or debris and clean thoroughly.
- Grease the propeller shaft and install the new propeller along with thrust washer, spacer, and nut.
- Tighten the nut to manufacturer torque specs and secure it with a new cotter pin.
Always refer to your outboard’s service manual for specific installation guidelines.
Maintenance Tips
Maintaining your Amita 3 – Honda 13 x 19” Solas RH Propeller is key to ensuring optimal performance and longevity. Here are a few maintenance practices:
- Regular Inspections: Check for damage or nicks on blades after every trip.
- Clean Thoroughly: Remove marine growth and rinse with fresh water, especially after saltwater use.
- Lubrication: Apply marine-grade grease on the propeller shaft every few months.
- Storage: If you’re winterizing your boat, remove the propeller to prevent corrosion and shaft seizure.
With proper care, your Honda 13×19 propeller marine can serve you reliably for years.
Propeller Performance: Speed, Fuel Economy & Handling
When it comes to performance, the Amita 3 13×19 Solas RH Propeller strikes the perfect balance between speed and efficiency. Boaters frequently report:
- Increased top-end speed up to 2-3 knots
- Improved fuel economy by up to 10%
- Stable cornering and smooth transitions
Whether you’re water skiing, cruising, or fishing, this propeller delivers reliable performance in various marine conditions. It’s one of the best Honda 13×19 propeller marine options on the market today.
Expert Advice and Pro Recommendations
Professional boaters and mechanics highly recommend this model for medium to heavy-duty applications. Its pitch ensures a good mix of torque and speed, while the aluminum composition provides a lightweight yet durable solution.
Pair this propeller with a compatible thrust washer and hub kit for optimal results. Also, avoid overloading the engine as it can wear out the prop prematurely.
Buy now: Amita 3 – Honda (13 x 19″) Solas RH Propeller, 6411-130-19 — Use code WELCOME5 for 5% off!
Detailed FAQ Section
What type of boats is the Honda 13 x 19 propeller best suited for?
This propeller is ideal for boats powered by Honda 75HP to 130HP outboards. It suits a variety of uses including fishing boats, ski boats, and recreational cruisers. Due to its pitch and blade design, it offers the acceleration and top speed that many performance-focused boaters seek. It is particularly effective on mid-sized fiberglass and aluminum hulls.
How do I know if this 13 x 19 Solas RH propeller fits my engine?
You should check your engine manual or contact the manufacturer to confirm compatibility. This model is specifically designed for Honda outboard motors in the 75-130HP range. It features a right-hand rotation, which is the most common setup. If you’re switching from a different pitch, consult a marine mechanic to verify RPM adjustments and gear ratio impact.
How often should I replace my aluminum marine propeller?
With proper care, an aluminum propeller like the Amita 3 can last several seasons. However, if you notice vibration, reduced speed, or visible cracks, it may be time to replace it. Regular inspection after every 20–30 hours of operation helps prevent major failures. If you’re boating in rocky or sandy waters, more frequent checks are advisable.
What’s the difference between aluminum and stainless steel propellers?
Aluminum propellers are cost-effective, lighter, and sufficient for general boating use. Stainless steel propellers are more durable and suitable for high-performance or commercial use. However, aluminum propellers like the Amita 3 provide an excellent balance of performance and affordability for most recreational boaters.
Can I install the Amita 3 propeller myself?
Yes, many boaters install this propeller themselves using standard tools. Always disconnect the battery before starting and follow safety precautions. If you’re unfamiliar with torque specs or shaft fittings, consult your service manual or hire a marine technician to avoid damage. It’s crucial to use marine-grade grease and the correct hardware kit for secure installation.
Conclusion
The Amita 3 – Honda (13 x 19″) Solas RH Propeller, 6411-130-19 is a top-tier choice for anyone looking to upgrade or replace their boat’s propeller. With its robust aluminum construction, engineered balance, and enhanced fuel efficiency, it delivers both value and performance. Whether you’re cruising at top speed or navigating through choppy waters, this propeller ensures smooth, controlled, and economical boating.
Enhance your marine engine performance today and enjoy the peace of mind that comes with a reliable propeller system tailored for Honda outboards.
Special Offer
WELCOME5 – Get 5% off storewide at allboatsupplies.com
🚀 Instant Assistance: Need help selecting the right product? Drop your contact in the chatbox at the bottom right corner, and our expert team will reply within 30 minutes with the best product suggestion for your boat — including a ready-to-use checkout link. We’re fast, knowledgeable, and always here for your boating needs!
No more guesswork — just message us and get a personalized checkout link for your antifouling system, fast!
Explore Our Best-Selling Ultrasonic Antifouling Products:
Buy now
Amita 3 – Honda (13 x 19″) Solas RH Propeller, 6411-130-19
Let us handle the hassle — expert support, quick replies, and smooth checkout. Your boat deserves the best.
Read More
For more helpful marine maintenance guides, check out our article on Amita 3 – Honda (13.25 x 17″) Solas RH Propeller, 6411-133-17.