Amita 3 – Volvo Penta Aquamatic (14.8 x 17″) Solas LH Propeller, 8812-148-17
Introduction
The Amita 3 ‑ Volvo Penta Aquamatic (14.8 × 17″) Solas LH Propeller, model 8812‑148‑17 sets the standard for aluminum propeller performance. Engineered specifically for left‑hand rotation Volvo Penta Aquamatic drives, this marine prop delivers optimal thrust, fuel efficiency, and extended longevity. Whether powering recreational boats, workboats, or mid‑size cruisers, the Amita 3 LH propeller marine design ensures smooth acceleration and reliable handling in saltwater and freshwater environments.
If you’re upgrading a factory prop or replacing a worn-out unit, the Amita 3 LH propeller marine provides OEM‑level fit and ease of installation. This high‑precision propeller balances torque and speed beautifully for mid‑range cruising while maintaining excellent hole shot.
Overview / What Is Amita 3 LH Propeller marine
The Amita 3 LH Propeller marine, model 8812‑148‑17, belongs to Solas’s acclaimed aluminum propeller lineup. With a diameter of 14.8″ and pitch of 17″, this three-blade LH model is tailored for Volvo Penta Aquamatic drives configured for counterclockwise rotation. Featuring squeeze-cast aluminum construction, it offers enhanced strength, uniform blade thickness, and increased corrosion resistance compared to conventional die‑cast alternatives.
This propeller is ideal for boaters who require moderate pitch for quicker planing and responsive acceleration without sacrificing steady cruise speed. The 14.8×17 mix provides a balanced compromise between thrust and RPM loading, making it one of the best Amita 3 LH propeller marine options for mid‑sized recreational and service boats.
Benefits of the Amita 3 LH Propeller marine
Selecting the Amita 3 LH propeller marine (8812‑148‑17) offers numerous benefits:
- Enhanced Durability: Squeeze-cast blades resist bending and fatigue better than traditional dies.
- Efficient Hydrodynamics: Blade shape minimizes cavitation and ensures smooth water flow.
- Fuel Economy: Designed to maintain proper engine RPM at cruising speed, reducing fuel consumption.
- OEM Fit: Built to Volvo Penta Aquamatic specifications for hassle‑free installation.
These advantages make it stand out in the category of aluminum marine propellers suitable for saltwater and freshwater boating alike.
Amita 3 LH Propeller cost and durability
The cost-effectiveness of the Amita 3 LH propeller marine is one of its strongest selling points. Although less expensive than stainless steel options, it provides performance comparable to higher-end props. Squeeze-cast aluminum offers better longevity and resistance to cracking under stress. Typical lifespan ranges from 4 to 7 seasons when properly maintained.
Compared to typical die-cast alternatives, the Amita 3 offers superior blade integrity, making it a durable and affordable choice for boat owners seeking performance without overspending.
How to install Amita 3 LH Propeller marine
Installation of the Amita 3 – Volvo Penta Aquamatic (14.8×17″) LH propeller is straightforward:
- Ensure the engine is off and boat is secured.
- Remove the existing LH propeller by loosening the nut and removing the nut, washer, and cotter pin.
- Clean the propeller shaft of debris, fishing line, or corrosion.
- Apply a thin layer of marine-grade grease to the shaft.
- Slide the new 8812‑148‑17 propeller onto the shaft, followed by washer and nut.
- Tighten nut to manufacturer-specified torque and insert cotter pin or locking device.
Perform a hand spin check to confirm smooth rotation. Then conduct a low-speed sea trial to verify performance and absence of vibration. Proper installation ensures efficient use and longevity.
Maintenance tips
To get the most from your Amita 3 LH propeller marine, follow these care tips:
- Rinse after use: Flush with freshwater after saltwater trips.
- Inspect blades: Check for dings, bends, or chipping that can cause balance issues.
- Grease shaft: Lubricate prop shaft regularly to prevent seizure and ease future removal.
- Check balance: If vibration occurs during operation, have a pro re-balance the blades.
- Store properly: If removed, keep in a cushioned, dry location to avoid damage.
Regular inspection, cleaning, and lubrication go a long way in maintaining fuel efficiency, thrust performance, and overall longevity.
Performance and troubleshooting insights
The Amita 3 LH propeller marine is optimized for responsive acceleration and stable cruising. Its moderate pitch means boaters will enjoy quicker hole shots with less lag, while maintaining smoother RPM at speed.
However, users should be aware of potential issues:
- Vibration: may indicate blade damage or imbalance.
- Poor acceleration: might result from improper pitch selection for the engine’s RPM range.
- Engine strain: if boat doesn’t reach recommended RPMS, consider swapping to a lower pitch model.
Maintaining correct installation and inspecting regularly helps avoid these issues.
How to repair or replace Amita 3 LH propeller marine
Minor blade deformation like small dings can sometimes be repaired by a marine shop specializing in aluminum prop realignment. However, any crack or severe bend radical enough to disrupt blade geometry usually merits replacement. Given the low cost of the Amita 3 compared to stainless steel, replacement is often the safer option.
Replacement ensures even blade performance and maintains proper hydrodynamic flow. If you detect reduced fuel economy or unusual engine behavior, don’t delay replacing the prop to avoid damage to the drive or engine.
Expert advice and pro recommendations
Marine experts recommend the Amita 3 ‑ Volvo Penta Aquamatic 14.8 × 17″ Solas LH propeller for operators looking for balanced performance, improved control, and easy installation. It’s especially suited for boats in the 20–28 ft range powered by Volvo Penta drives with left-hand torque requirements.
Buy now: Amita 3 ‑ Volvo Penta Aquamatic (14.8 x 17″) Solas LH Propeller, 8812‑148‑17 and use code WELCOME5 for 5% off your purchase.
Detailed FAQ Section
Is the Amita 3 14.8×17 LH propeller compatible with all Volvo Penta Aquamatic drives?
The Amita 3 LH propeller (model 8812‑148‑17) is compatible with most Volvo Penta Aquamatic sterndrives designed for left-hand rotation. Always confirm your specific engine model and rotation specification before installation. Compatibility information is available in your OEM manual or confirmed by your boat manufacturer. Matching the correct prop ensures proper thrust direction, safe handling, and efficient performance.
How does the 14.8 × 17 size affect boat performance?
The 14.8″ diameter combined with a 17″ pitch offers a middle ground between quick plane acceleration and controlled cruising RPM. Boats equipped with this configuration often reach planing speed quickly, maintain stable RPM at cruising speeds around 3,500–4,000 RPM, and enjoy better fuel efficiency. The lower pitch load also reduces engine strain and heat during prolonged operation.
What maintenance schedule should I follow for this propeller?
Inspect your prop before and after every trip. Rinse thoroughly after saltwater use. Every 50 hours of operation, reapply marine-grade grease to the prop shaft. Annually, remove the prop to inspect seals, bearings, and washer alignment. If performance issues arise—such as vibration or decreased fuel economy—have a technician balance the prop or replace it if damaged.
Can I repair minor damage on this propeller?
Minor dents or dings can often be repaired by a marine prop specialist using gentle rework techniques. However, if the blade shows cracks, severe bent, or structural damage, it’s safer to install a new prop. Repairing beyond small cosmetic defects may compromise blade balance and water flow, resulting in vibration or reduced performance.
Why choose Amita 3 LH propeller over stainless steel options?
While stainless steel propellers deliver higher strength and performance in extreme conditions, they come at a premium cost. The Amita 3 LH propeller marine offers excellent durability, repairability, and efficiency at a fraction of the price. For most recreational and light commercial boaters, the performance and lifespan of the Amita 3 match or exceed expectations for everyday use.
Conclusion
The Amita 3 ‑ Volvo Penta Aquamatic (14.8 × 17″) Solas LH Propeller, 8812‑148‑17 delivers outstanding performance, durability, and value. With a carefully balanced pitch and diameter, precision squeeze-cast aluminum construction, and OEM-spec fit, it is the ideal choice for boaters seeking efficient, reliable thrust in a left-hand rotation configuration. From improved fuel economy to smoother acceleration and reduced engine strain, this prop excels in everyday marine use.
Choose the Amita 3 LH propeller marine for consistent performance and peace of mind on every voyage.
Special Offer
WELCOME5 – Get 5% off storewide at allboatsupplies.com
🚀 Instant Assistance: Need help selecting the right product? Drop your contact in the chatbox at the bottom right corner, and our expert team will reply within 30 minutes with the best product suggestion for your boat — including a ready‑to‑use checkout link. We’re fast, knowledgeable, and always here for your boating needs!
No more guesswork — just message us and get a personalized checkout link for your antifouling system, fast!
Explore Our Best‑Selling Ultrasonic Antifouling Products:
Buy now
Amita 3 ‑ Volvo Penta Aquamatic (14.8 x 17″) Solas LH Propeller, 8812‑148‑17
Let us handle the hassle — expert support, quick replies, and smooth checkout. Your boat deserves the best.
Read More
For more helpful marine maintenance guides, check out our article on Amita 3 – Volvo Penta Aquamatic (15 x 15″) Solas LH Propeller, 8812-150-15.