Amita 4 – Honda (9.25 x 7″) Solas RH Propeller, 3113-093-07
Introduction
The Amita 4 – Honda (9.25 x 7″) Solas RH Propeller, 3113-093-07 is a high-performance aluminum propeller specifically designed for Honda outboard engines. Manufactured by Solas, a world-renowned name in marine propulsion, this 4-blade right-hand rotation propeller delivers superior performance, increased thrust, and optimal fuel efficiency. Whether you’re cruising through calm waters or navigating choppy conditions, the Amita 4 Honda propeller ensures your boating experience is both smooth and reliable.
Built with high-quality aluminum and coated with an anti-corrosion finish, this propeller is engineered to withstand the harsh marine environment. With a diameter of 9.25 inches and a pitch of 7 inches, it is ideally suited for smaller boats and outboard engines where acceleration, handling, and durability matter the most.
Overview / What Is Amita 4 Honda Propeller
The Amita 4 Honda propeller is a 4-blade aluminum propeller with a 9.25-inch diameter and 7-inch pitch. Designed for Honda outboard motors, it offers exceptional thrust and smooth handling, especially at low speeds. It is best suited for small to mid-sized boats where acceleration and control are essential.
This Solas RH propeller is constructed with a squeeze-cast aluminum body, providing excellent strength-to-weight ratio. The 4-blade configuration enhances grip in water, making it ideal for towing, fishing, and recreational boating.
Key Benefits of Using Amita 4 Honda Propeller
Here are the primary advantages of choosing this propeller for your boat:
- Durability: Built from corrosion-resistant aluminum, perfect for salt and freshwater use.
- Performance: 4-blade design improves acceleration, stability, and low-speed handling.
- Fuel Efficiency: Optimized pitch and blade angle reduce fuel consumption.
- Affordability: Cost-effective without compromising quality.
- Ease of Installation: Compatible with Honda outboards and easy to install with standard tools.
If you’re wondering how to choose the best Honda outboard propeller, the Amita 4 is among the top-rated options for both beginners and seasoned boaters.
How to Install the Amita 4 Honda Propeller
Installing the Amita 4 Honda propeller is straightforward. Follow these steps to replace your existing prop:
- Use a wrench to remove the cotter pin and prop nut from the current propeller.
- Slide the old propeller off the shaft.
- Clean the shaft and inspect it for any signs of damage or corrosion.
- Grease the shaft lightly before sliding on your new Amita 4 propeller.
- Secure the propeller with the prop nut and cotter pin.
Always refer to your Honda outboard manual for torque specifications and safety procedures. If you’re unsure, it’s best to consult a professional marine technician.
Maintenance Tips
Proper maintenance of your propeller ensures longevity and optimal performance. Here are key maintenance tips:
- Inspect Regularly: After every trip, inspect the propeller for dents, cracks, or fishing line wrapped around the shaft.
- Clean After Use: Wash the propeller with fresh water, especially after saltwater usage.
- Grease the Shaft: Apply marine-grade grease on the shaft every time you reinstall the propeller to prevent corrosion and ease future removals.
- Check Alignment: Ensure the propeller is centered properly to avoid vibration or uneven wear.
With proper care, the Amita 4 Honda propeller can offer years of dependable marine performance.
Troubleshooting Common Propeller Issues
If you’re experiencing performance issues, the propeller might be to blame. Here are some common problems and how to solve them:
- Boat is sluggish or slow to plane: Check if the prop is damaged or if the pitch is too high.
- Engine over-revs: This may indicate that the pitch is too low. A higher-pitch prop may be needed.
- Vibrations while cruising: Inspect for bent blades or debris caught in the propeller.
Addressing these problems early can save your engine from damage and ensure a smoother ride.
Expert Advice and Pro Recommendations
Marine professionals often recommend the Amita 4 – Honda (9.25 x 7″) Solas RH Propeller, 3113-093-07 for its proven reliability and performance. It’s particularly popular among fishing enthusiasts and recreational boaters looking for better low-speed maneuverability and quick hole shots.
If you need enhanced thrust without sacrificing efficiency, this propeller is a wise investment. Don’t forget to use the promo code WELCOME5 at checkout to save 5% on your order.
Buy now: Amita 4 – Honda (9.25 x 7″) Solas RH Propeller, 3113-093-07 and use code WELCOME5 for a 5% discount.
Detailed FAQ Section
What makes the Amita 4 Honda propeller different from 3-blade propellers?
The primary difference lies in performance and control. The 4-blade Amita 4 provides greater grip in water, improved hole shot, and smoother performance at lower speeds. While 3-blade props are great for top speed, the Amita 4 is ideal for boats requiring better handling and load-carrying capabilities. It’s perfect for fishing, trolling, or towing because it reduces cavitation and offers more control in tight spots.
Is the Amita 4 Honda (9.25 x 7″) Solas RH Propeller compatible with all Honda outboard motors?
The propeller is designed for specific Honda outboards, typically in the 8-20 HP range. Always verify the shaft diameter, spline count, and pitch requirements before purchasing. Most Honda engines in the 9.9 HP to 20 HP category support this propeller, but double-checking compatibility ensures optimal performance and prevents mechanical issues.
How do I choose between different propeller pitches?
Pitch determines how far your boat moves forward with one propeller revolution. A lower pitch (like 7″) offers better acceleration and is ideal for heavier loads or watersports. A higher pitch provides more top-end speed but may strain smaller engines. If your boat struggles to get on plane, a lower pitch like the Amita 4’s 7-inch is likely the best option.
What materials are used in Amita 4 propellers and why aluminum?
Amita 4 propellers are made from high-quality squeeze-cast aluminum. Aluminum is corrosion-resistant, lightweight, and cost-effective. It provides sufficient strength for most recreational boating activities. The squeeze-casting process used by Solas enhances the density and durability of the material, making it stronger than traditional cast aluminum props.
How often should I replace my Amita 4 Honda propeller?
With regular maintenance, your Amita 4 propeller can last several seasons. Replace the propeller if you notice visible cracks, severe dings, or performance loss even after cleaning and balancing. Some boaters replace props annually as part of preventative maintenance, while others may get several years of use with proper care and usage in debris-free waters.
Conclusion
The Amita 4 – Honda (9.25 x 7″) Solas RH Propeller, 3113-093-07 is a powerhouse in a compact design. Whether you’re a weekend adventurer or a dedicated angler, this propeller promises enhanced handling, improved acceleration, and long-lasting reliability. Its 4-blade configuration and squeeze-cast aluminum construction make it a dependable addition to any Honda outboard setup.
Don’t compromise on your boating experience. Upgrade to the Amita 4 Honda propeller today and feel the difference every time you set sail.
Special Offer
WELCOME5 – Get 5% off storewide at allboatsupplies.com
🚀 Instant Assistance: Need help selecting the right product? Drop your contact in the chatbox at the bottom right corner, and our expert team will reply within 30 minutes with the best product suggestion for your boat — including a ready-to-use checkout link. We’re fast, knowledgeable, and always here for your boating needs!
No more guesswork — just message us and get a personalized checkout link for your antifouling system, fast!
Explore Our Best-Selling Ultrasonic Antifouling Products:
Buy now
Amita 4 – Honda (9.25 x 7″) Solas RH Propeller, 3113-093-07
Let us handle the hassle — expert support, quick replies, and smooth checkout. Your boat deserves the best.
Read More
For more helpful marine maintenance guides, check out our article on Amita 4 – Evinrude/Johnson (9.25 x 11″) Solas RH Propeller, 2113-093-11.