Amita 3 – Mercury (9.25 x 8″) Solas RH Propeller, 5111-093-08
Introduction
The Amita 3 – Mercury (9.25 x 8″) Solas RH Propeller, 5111-093-08 is an exceptional aluminum propeller designed specifically for Mercury outboard engines. As part of the trusted Amita 3 series, this right-hand rotating 3-blade propeller provides unmatched thrust, durability, and smooth performance—ideal for small to medium-sized boats in both freshwater and saltwater environments.
Its high-quality squeeze-cast aluminum construction ensures resilience under various boating conditions, while the precision-engineered blades deliver consistent acceleration and stability. Whether you’re a recreational angler, a weekend cruiser, or a boating enthusiast, this model will elevate your experience with reliability and efficiency.
Overview / What Is the Amita 3 – Mercury (9.25 x 8″) Solas RH Propeller?
The Amita 3 – Mercury 9.25 x 8″ is a right-hand aluminum propeller manufactured by Solas, one of the world’s leading propeller brands. Designed for Mercury outboards, this model offers a blade geometry optimized for better hole shot and mid-range fuel efficiency. With a diameter of 9.25 inches and a pitch of 8 inches, it’s ideal for lighter boats or those carrying moderate loads.
The propeller is crafted using advanced squeeze-cast technology that enhances its structural integrity and resistance to impact. Its hydrodynamic shape, together with anti-ventilation and cavitation designs, makes it a standout performer in the aluminum propeller category.
Top Advantages of Using Amita 3 – Mercury (9.25 x 8″) Solas RH Propeller
Here are some of the key benefits that make this propeller a top choice:
- Precision Engineering: Advanced CAD design ensures maximum efficiency and low vibration.
- Corrosion Resistant: Ideal for both saltwater and freshwater with a baked-on protective finish.
- Easy Installation: Compatible with standard Mercury hubs for quick and easy DIY replacement.
- Durability: Squeeze-cast aluminum offers higher strength than traditional die-cast props.
- Smooth Performance: Balanced design for reduced noise and better handling.
This combination of features makes it a solid performer for general boating, fishing, and light recreational use.
How to Install Amita 3 Mercury Propeller Properly
Proper installation ensures longevity and peak performance. Follow these steps:
- Shift the engine into neutral and disconnect the ignition key or battery.
- Remove the cotter pin or locking tab and loosen the propeller nut.
- Slide the old propeller off and clean the propeller shaft.
- Apply a thin layer of marine grease on the shaft to prevent seizing.
- Align the Amita 3 propeller with the splines and slide it onto the shaft.
- Secure the nut and install a new cotter pin or lock tab.
Important: Check your user manual for proper torque specifications and safety measures before use.
Why Choose a 9.25 x 8″ Pitch for Mercury Engines?
The 8″ pitch on this propeller is excellent for small Mercury outboards that need faster acceleration with moderate top-end speed. It’s particularly beneficial in applications where boats are lightly loaded or require better low-speed maneuverability, such as in fishing or shallow water navigation.
If you’re upgrading from a higher-pitch propeller and your boat struggles to plane or has sluggish throttle response, this 9.25 x 8″ prop can deliver immediate improvement without compromising efficiency or engine health.
Maintenance Tips
Regular maintenance can extend the life of your Amita 3 propeller and help you avoid costly repairs. Here are some key tips:
- Monthly Inspections: Check for bent blades, dings, or nicks that can affect performance.
- Remove Debris: Fishing lines, weeds, or debris around the shaft should be cleaned immediately.
- Lubricate: Apply marine grease to the prop shaft each time the prop is removed.
- Flush After Use: Rinse thoroughly after saltwater exposure to prevent corrosion buildup.
- Check Hub Condition: Inspect the hub bushing for signs of wear or spinning.
Maintenance is especially crucial after hitting underwater obstacles or operating in sand or mud.
Expert Advice and Pro Recommendations
Marine experts often recommend the Amita 3 – Mercury 9.25 x 8″ for casual boaters, anglers, and those who need a reliable backup prop. Its affordability and durability make it a smart investment, particularly for boat owners who want performance without spending on stainless steel alternatives.
If your current prop is underperforming or showing signs of wear, now’s the perfect time to upgrade. This propeller balances power and efficiency and works excellently on lightweight vessels and inflatables with Mercury outboards.
Buy now: Amita 3 – Mercury (9.25 x 8″) Solas RH Propeller, 5111-093-08 and use code WELCOME5 for 5% off your purchase.
Troubleshooting Amita 3 Mercury Propeller Performance Issues
If your boat isn’t performing as expected, the issue might be propeller-related. Here are common symptoms and fixes:
- Slow Acceleration: You might be using too high a pitch—switching to the 8″ can help.
- Engine Overheating: Could be caused by cavitation or improper alignment—inspect prop fit and condition.
- Vibrations: Check for bent or unbalanced blades and verify the hub integrity.
- Poor Top Speed: A lower pitch increases thrust but reduces top speed—ensure pitch matches usage goals.
Make sure to inspect all other driveline components before replacing the propeller. Improper mounting height or damaged gears can also cause similar issues.
Amita 3 Mercury Propeller Cost and Durability Insights
Compared to stainless steel options, the aluminum Amita 3 offers an affordable solution without compromising on performance. The squeeze-cast construction provides durability close to stainless steel at a much lower cost. For boaters who want to maintain performance and protect their budget, this model is a leading option.
Durability tests show that the Amita 3 withstands regular use in shallow and saltwater conditions, with minimal signs of wear when properly maintained. This makes it one of the best aluminum propellers in its price category.
Detailed FAQ Section
What makes the Amita 3 9.25 x 8″ propeller different from the 9.25 x 7″ version?
The difference lies in pitch—while both have the same diameter (9.25″), the 8″ pitch allows the propeller to move the boat further per engine revolution than the 7″. This results in slightly higher speed and reduced engine RPM at cruising speed. The 7″ pitch offers better acceleration and thrust for heavier boats or those needing quick take-off. Choosing between them depends on your specific boating needs and load conditions.
Can I install this propeller on a non-Mercury engine?
This model (5111-093-08) is specifically engineered for Mercury outboards. While some aftermarket adapters might exist, they can compromise fit, performance, and safety. It’s always best to match the propeller hub and spline design with your engine make. If you have a non-Mercury engine, check Solas’ other Amita 3 models designed for Yamaha, Honda, Suzuki, and others.
How long does this propeller last under regular use?
When properly maintained, the Amita 3 – Mercury (9.25 x 8″) can last several seasons. Users report minimal wear even after 100+ hours of runtime when used in moderate to light boating applications. Regular inspections, timely cleaning, and correct installation can extend its life. Avoiding hard underwater impacts is essential for longevity, as aluminum props are softer than stainless steel and more prone to dings.
Is this propeller suitable for saltwater environments?
Yes, the Amita 3 comes with a corrosion-resistant coating that makes it suitable for saltwater use. However, routine post-trip rinsing and regular maintenance are necessary to prevent salt buildup and pitting. Using marine grease and checking for corrosion after every few trips is a good practice. With proper care, it performs excellently in saltwater conditions without excessive wear.
What are the best ways to improve my boat’s performance with this prop?
To get the best out of the Amita 3 propeller, ensure the engine mounting height is correct and the boat isn’t overloaded. You can also trim the motor for optimal thrust and adjust weight distribution onboard. Regularly inspect the prop for damage and keep the blades clean. Complementing this prop with quality marine fuel and a clean hull can also increase top speed and fuel economy.
Conclusion
The Amita 3 – Mercury (9.25 x 8″) Solas RH Propeller is a high-value solution for Mercury outboard owners who need reliable performance, simple installation, and budget-friendly durability. Its optimized pitch, smooth hydrodynamics, and corrosion-resistant build make it one of the best options in the aluminum propeller category. Perfect for light recreational boating or fishing trips, it ensures you’re ready to hit the water with confidence.
Special Offer
WELCOME5 – Get 5% off storewide at allboatsupplies.com
🚀 Instant Assistance: Need help selecting the right product? Drop your contact in the chatbox at the bottom right corner, and our expert team will reply within 30 minutes with the best product suggestion for your boat — including a ready-to-use checkout link. We’re fast, knowledgeable, and always here for your boating needs!
No more guesswork — just message us and get a personalized checkout link for your antifouling system, fast!
Explore Our Best-Selling Ultrasonic Antifouling Products:
Buy now
Amita 3 – Mercury (9.25 x 8″) Solas RH Propeller, 5111-093-08
Let us handle the hassle — expert support, quick replies, and smooth checkout. Your boat deserves the best.