Simrad PUMP-1 MKII 0.8L 12v Hydraulic Pump – Pros & Cons

Introduction

The Simrad PUMP-1 MKII 0.8L 12v Reversible Hydraulic Pump Up to 14cui is an advanced autopilot drive unit designed to deliver precision steering control and unmatched reliability for a wide range of marine applications. Perfect for boats equipped with hydraulic steering systems, this pump ensures seamless integration with Simrad autopilot systems. Engineered with durability and performance in mind, it is an excellent choice for boat owners who value stability, ease of use, and long-term efficiency.

Whether you are upgrading your current steering system or looking for an efficient drive unit for your new autopilot installation, the Simrad PUMP-1 MKII is built to exceed expectations. In this comprehensive guide, we will cover everything you need to know about this pump, including its features, maintenance tips, expert recommendations, FAQs, and special offers.

Overview / What Is Simrad PUMP-1 MKII?

The Simrad PUMP-1 MKII is a reversible hydraulic pump designed specifically for boats equipped with hydraulic steering systems. With a capacity of 0.8 liters and compatibility with steering cylinders up to 14 cubic inches, this pump ensures smooth, efficient operation with minimal noise and vibration. It is powered by a 12-volt system, making it ideal for small to mid-sized boats.

It integrates seamlessly with Simrad autopilot systems, delivering precision control even in challenging conditions. The reversible functionality allows for smooth and responsive steering adjustments, enhancing your boating experience.

Key Features of Simrad PUMP-1 MKII 0.8L 12v Reversible Hydraulic Pump

The following are the standout features that make this product an industry favorite:

• 0.8L capacity – optimized for medium-sized vessels.
• Reversible hydraulic action for smooth steering.
• 12v power requirement, compatible with most boat electrical systems.
• Supports steering cylinders up to 14cui.
• Durable, corrosion-resistant materials for long life.
• Easy installation and integration with Simrad autopilots.

How to Install Simrad PUMP-1 MKII on Your Boat

Installation is straightforward for experienced boat owners or professionals. However, proper installation is critical to ensure optimal performance and safety. Follow these general steps:

1. Mount the pump securely near the steering cylinder.
2. Connect the hydraulic lines according to the manufacturer’s instructions.
3. Wire the pump to the autopilot controller using the provided cables.
4. Fill and bleed the hydraulic system to remove any air bubbles.
5. Test the system to confirm proper steering response.

For a detailed installation guide, always refer to the official Simrad manual or consult a certified marine technician. Improper installation may void the warranty and compromise safety.

Benefits of Using Simrad PUMP-1 MKII 0.8L 12v Reversible Hydraulic Pump

Investing in this pump offers numerous benefits:

• Enhanced Safety: Maintains precise control even in rough seas.
• Fuel Efficiency: Optimized steering reduces unnecessary fuel consumption.
• Low Maintenance: Designed to minimize wear and tear.
• Quiet Operation: Low-noise performance for a better boating experience.

Maintenance Tips

Maintaining the Simrad PUMP-1 MKII is essential for longevity and optimal performance. Follow these maintenance tips:

• Regularly check for hydraulic fluid leaks.
• Inspect the pump’s electrical connections for corrosion.
• Flush and replace hydraulic fluid periodically.
• Ensure no air is trapped in the hydraulic lines.

With proper maintenance, this pump can last for years without any performance issues.

Troubleshooting Common Issues with Simrad PUMP-1 MKII

Occasionally, you may encounter issues such as slow steering response, noise, or fluid leakage. Here’s how to handle them:

• Slow Response: Check hydraulic fluid levels and electrical connections.
• Noise: Air in the hydraulic lines – bleed the system.
• Leakage: Inspect seals and fittings; replace worn components.

If problems persist, consult an authorized Simrad dealer for assistance.

Expert Advice and Pro Recommendations

Marine experts recommend pairing the Simrad PUMP-1 MKII with a compatible Simrad autopilot system for the best performance. Additionally, always use high-quality hydraulic fluid to prevent contamination and damage.

For optimal results, schedule annual maintenance checks and follow the manufacturer’s guidelines strictly.

Buy now: Simrad PUMP-1 MKII 0.8L 12v Reversible Hydraulic Pump Up to 14cui and get 5% off using code WELCOME5.

Detailed FAQ Section

1. How do I install the Simrad PUMP-1 MKII 0.8L 12v Reversible Hydraulic Pump?

Installing the Simrad PUMP-1 MKII requires basic mechanical and electrical knowledge. First, mount the pump securely near the hydraulic steering cylinder. Next, connect the hydraulic hoses as per the Simrad manual and ensure there are no leaks. Wire the pump to the autopilot system using the supplied cables. Afterward, bleed the system to remove any trapped air. Always double-check all connections and conduct a test run to verify correct operation. For those unfamiliar with marine hydraulics, hiring a certified technician is highly recommended to ensure proper setup and warranty protection.

2. What maintenance does the Simrad PUMP-1 MKII require?

This pump is designed for low maintenance, but routine checks are essential. Inspect the hydraulic fluid regularly for contamination or low levels. Check all fittings for leaks and ensure electrical connections are corrosion-free. Bleed the hydraulic lines periodically to remove air. Additionally, replace worn seals and use only recommended hydraulic fluid. Performing these checks prolongs the pump’s lifespan and maintains optimal performance.

3. Is the Simrad PUMP-1 MKII compatible with all boats?

The Simrad PUMP-1 MKII is compatible with most boats equipped with hydraulic steering systems up to 14 cubic inches. However, compatibility depends on the specific steering cylinder capacity and autopilot system. Always verify your boat’s steering specifications and consult with a Simrad dealer before purchase to ensure perfect integration.

4. How long does the Simrad PUMP-1 MKII last?

With proper maintenance, the Simrad PUMP-1 MKII can last many years. Its corrosion-resistant design and robust construction ensure long-term durability even in harsh marine environments. Regular fluid checks, proper installation, and adherence to maintenance schedules significantly extend its operational life.

5. Where can I buy the Simrad PUMP-1 MKII and get discounts?

You can purchase this pump from All Boat Supplies, an authorized Simrad dealer. Use the code WELCOME5 to enjoy a 5% discount on your order. Additionally, check other trusted marine supply stores and authorized resellers for competitive prices and promotions.

Conclusion

The Simrad PUMP-1 MKII 0.8L 12v Reversible Hydraulic Pump Up to 14cui is an excellent choice for boaters seeking precision, durability, and smooth steering. Whether you are upgrading or installing a new autopilot system, this pump delivers unmatched performance and reliability. Maintain it well, and it will serve you for many years.

For additional resources and expert marine equipment, visit Yamaha Outboards for trusted marine solutions.

Special Offer

WELCOME5 – Get 5% off storewide at allboatsupplies.com

🚀 Instant Assistance: Need help selecting the right product? Drop your contact in the chatbox at the bottom right corner, and our expert team will reply within 30 minutes with the best product suggestion for your boat — including a ready-to-use checkout link. We’re fast, knowledgeable, and always here for your boating needs!

No more guesswork — just message us and get a personalized checkout link fast!

Let us handle the hassle — expert support, quick replies, and smooth checkout. Your boat deserves the best.

Read More

For more helpful marine maintenance guides, check out our article on Airmar B785C Humminbird 9-Pin – Avoid Issues & Boost Performance.