Amita 3 – Evinrude/Johnson/OMC (13.2 x 21″) Solas RH Propeller, 2411-132-21
Introduction
If you’re searching for a high‑performance propeller for your Evinrude, Johnson or OMC outboard motor, the Amita 3 – 13.2 × 21" Solas RH Propeller, 2411‑132‑21 is engineered to deliver exceptional thrust, smooth acceleration, and long‑lasting durability. In this comprehensive guide, we dive deep into this precision crafted aluminum prop and present expert advice, installation techniques, maintenance protocols, and long tail keywords to support your decision making. Whether you’re upgrading your vessel or seeking better fuel economy and performance, this Amita 3 propeller marine model is designed to optimize your boating experience.
Overview / What Is Amita 3 Propeller Marine
The Amita 3 (13.2 × 21") is a right‑hand rotation aluminum propeller manufactured by Solas for compatibility with Evinrude, Johnson and OMC engines. With its 13.2‑inch diameter and 21‑inch pitch, it provides a perfect balance of mid‑range torque and top‑end speed for boats in the 50–140 HP range. Its precision‑cast marine aluminum alloy ensures corrosion resistance, lightweight handling and ease of repair.
This prop is ideal for both casual boaters and performance‑oriented users. The blade design reduces ventilation and cavitation while enhancing acceleration and planing. It’s widely considered one of the best Amita 3 propeller marine choices in the aluminum propellers category due to its durability and tested performance.
Key Attributes and Performance Benefits
The Amita 3 propeller marine model boasts features tailored for reliability and efficiency:
- Size & Pitch: 13.2″ diameter, 21″ pitch delivers increased top speed with improved RPM control.
- Construction: Die‑cast marine‑grade aluminum, powder‑coated finish to resist saltwater corrosion.
- Compatibility: Fits select Evinrude, Johnson and OMC engines (typically mid‑range HP models).
- Blade Design: Hydrodynamic blades that minimize spray and drag, tuned for planing efficiency.
- Balance & Stability: Factory balanced to reduce vibration and wear on gearcases.
Compared to OEM props, the Amita 3 propeller marine variant typically offers smoother acceleration, more reliable top speeds, and longer operational life when cared for properly.
How to Install the Amita 3 Propeller (How to install Amita 3 propeller marine)
When wondering how to install Amita 3 propeller marine, you’ll find it straightforward with basic tools. A torque wrench, marine grease and proper safety steps are essential.
Steps to install:
- Shut off engine and disconnect battery, tilt engine upward.
- Remove retaining nut and washers from existing propeller.
- Clean shaft of fouling, fishing line, corrosion.
- Apply marine‑grade grease sparsely to prop shaft splines.
- Slide new Amita 3 (13.2 × 21″) onto shaft matching keyway.
- Install washers and torque nut per engine manual specs.
- Spin by hand to test free rotation and check for binding.
Make sure your engine’s recommended RPM range matches the expected performance. Many users ask about Amita 3 propeller marine troubleshooting if RPM is too high or low—adjust pitch size accordingly.
Maintenance Tips
Proper routine care is vital for preserving your Amita 3 propeller marine investment:
- After every outing: inspect blades for dings, bends, cracks.
- Clean with fresh water and mild detergent to remove salt, algae or barnacles.
- Lubricate propeller shaft using marine grease at least every 3 outings.
- Check blade balance periodically; vibration indicates imbalance or damage.
- During off‑season: remove propeller and store in dry, coated environment to avoid galvanic corrosion.
Also follow specific Amita 3 propeller marine maintenance tips: for long‑term durability, wipe blades dry after rinse, use protective prop boots, and inspect the hub regularly.
Best Use Cases for Amita 3 (topic-specific section on applications)
The Amita 3 (13.2 × 21″) propeller marine version excels in varied boating scenarios:
- Family Cruising: Smooth acceleration and stability when boarding with passengers.
- Fishing Tours: Ideal balance of low RPM trolling and flat‑out cruise speed.
- Ski & Tow Boating: 21″ pitch helps in reaching planing speeds efficiently under load.
- Light Commercial Use: Durable enough for frequent use on taxi, guide or rental boats (fits engines up to 140 HP).
This is clearly one of the best Amita 3 propeller marine options for those seeking cost‑effective yet high performance in aluminum propellers category.
Performance Considerations & Troubleshooting
Many users wonder about Amita 3 propeller marine troubleshooting when engine RPM is off or performance dips:
Key signs of improper fit:
- RPM too high: see lower pitch (e.g. 19″ instead of 21″).
- RPM too low: consider switching to higher pitch if engine is under‑revving.
- Vibration or cavitation: inspect for damage, rebalance or replace if needed.
Performance and cost and durability go hand‑in‑hand—this prop offers excellent lifespan when used correctly and monitored for signs of wear. Monitoring tachometer RPM helps ensure you remain within optimal engine specifications.
Expert Advice and Pro Recommendations
Marine professionals recommend the Amita 3 propeller marine model for users wanting reliable, mid‑range performance without overspending. According to expert mechanics, this 13.2×21 prop passes many performance tests, from planing response to fuel economy and top speed balance.
If upgrading from stock or comparing best Amita 3 propeller marine options, consider matching pitch with boat load, season, water type (fresh vs salt), and typical cruising speed. Many pros advise starting with this 21″ pitch and adjusting based on tachometer readings during sea trial.
Buy now: Amita 3 – Evinrude/Johnson/OMC (13.2 x 21″) Solas RH Propeller, 2411-132-21 and use 5% off code WELCOME5 to enhance your boating performance.
Detailed FAQ Section
How do I choose between 19″ and 21″ pitch models like the Amita 3?
Choosing between the 19″ vs 21″ pitch depends on your boat’s weight, typical loads, and desired top speed. A 21″ pitch such as this Amita 3 is optimal for lighter boats or when you want higher top speeds and better RPM control at cruising speeds. If you carry heavier gear or go uphill frequently, a 19″ pitch may offer better acceleration. Use a tachometer to measure your cruising RPM: if you are above manufacturer spec, pitch too low; if below, pitch too high. This FAQ addresses Amita 3 propeller marine troubleshooting regarding pitch selection.
Once installed, perform a sea trial at wide open throttle (WOT) and record RPM. Optimal RPM for most Evinrude/Johnson engines is between 4500–5500 RPM. Adjust if necessary by switching to alternate pitch. Many experienced boaters review best Amita 3 propeller marine options by testing both sizes under typical conditions before finalizing.
Can I repair a bent Amita 3 propeller blade?
Yes, aluminum propellers like the Amita 3 can often be repaired if the bend is minor. A qualified marine prop shop can realign and balance blades using specialized equipment. However, if cracks or severe distortion exist, consider replacement. Repair costs are usually lower than stainless steel props. One must weigh cost and durability: frequent impacts may reduce lifespan. Regularly inspect blades and hub for wear, and document repairs to gauge when replacement is appropriate.
Proper maintenance and inspection reduce the need for costly repairs. For Amita 3 propeller marine maintenance tips, always rinse blades after saltwater use and apply anti-corrosion spray to blunt edges.
What engine horsepower is compatible with the Amita 3 13.2×21 prop?
This prop fits most Evinrude, Johnson and OMC outboards in the 50–140 HP range, including vintage models. Ensure that your engine uses a standard rubber hub and 13‑spline shaft; some older or high‑torque models may require a hub kit adapt. Checking your motor’s manual or contacting a technician ensures proper fit. This FAQ addresses Amita 3 propeller marine compatibility and troubleshooting—consult the compatibility guide or chart before ordering.
As a performance tip, match prop pitch to engine specs: with typical 55–75 HP, 21″ pitch helps maintain RPM in sweet‑spot range. Heavier hulls or boats carrying heavy loads might benefit from slightly lower pitch to avoid overloading the motor.
How to troubleshoot excessive vibration after installing Amita 3?
If you experience vibration after installing the Amita 3 propeller marine model, first inspect for blade damage or hub slipping. Even minor dents cause imbalance. Remove and spin the propeller manually to feel rubbing or tight spots. Clean shaft and bearings; grease thoroughly. If vibration persists, check engine mounting hardware or alignment. Rebalancing the prop at a marine shop helps restore smoothness. Always confirm spline seating is correct and washers are properly placed.
Regular maintenance and prompt repairs reduce unchecked wear. Amateur troubleshooting often solves minor imbalance issues before they affect gearcase or bearings—just apply the Amita 3 propeller marine maintenance tips consistently.
What is the expected lifespan and cost efficiency of Amita 3 propeller marine?
The Amita 3 propeller, when properly maintained, can last several boating seasons—often 3–5 years depending on use frequency and water conditions. Aluminum propellers are more forgiving to impacts than stainless steel, reducing cost in case of groundings. If you frequently encounter debris or shallow water, factor in minor repairs. Its cost and durability balance makes it one of the best Amita 3 propeller marine options for budget‑conscious boaters seeking quality and performance.
Monitor fuel efficiency and RPM performance; any dips over time may signal blade wear or hub slip. Annual inspection and balancing extend the life and maximize cost efficiency.
Conclusion
Overall, the Amita 3 – Evinrude/Johnson/OMC (13.2 × 21") Solas RH Propeller, 2411‑132‑21 stands out as a robust, efficient, and well‑engineered propeller for mid‑range marine engines. With its combination of acceleration, top speed, and cost-effective construction, it’s a dependable choice for both casual boaters and performance users. When you follow proper installation, maintenance and pitch‑matching guidelines, this prop delivers excellent value and longevity in the aluminum propellers category.
Special Offer
WELCOME5 – Get 5% off storewide at allboatsupplies.com
🚀 Instant Assistance: Need help selecting the right product? Drop your contact in the chatbox at the bottom right corner, and our expert team will reply within 30 minutes with the best product suggestion for your boat — including a ready-to-use checkout link. We’re fast, knowledgeable, and always here for your boating needs!
No more guesswork — just message us and get a personalized checkout link for your antifouling system, fast!
Explore Our Best-Selling Ultrasonic Antifouling Products:
Buy now
Amita 3 – Evinrude/Johnson/OMC (13.2 x 21″) Solas RH Propeller, 2411-132-21
Let us handle the hassle — expert support, quick replies, and smooth checkout. Your boat deserves the best.
Read More
For more helpful marine maintenance guides, check out our article on Amita 3 – Evinrude/Johnson/OMC (13.2 x 19″) Solas RH Propeller, 2411-132-19.