Amita 3 – Evinrude/Johnson (9.25 x 8″) Solas RH Propeller, 4111-093-08A
Introduction
The Amita 3 – Evinrude/Johnson (9.25 x 8″) Solas RH Propeller, 4111-093-08A is a trusted choice among boat owners looking for high-performance aluminum propellers. Manufactured by Solas, one of the leading names in marine propulsion, this three-blade propeller is optimized for Evinrude and Johnson outboard engines. With its 9.25-inch diameter and 8-inch pitch, this RH (right-hand) rotating propeller delivers a smooth ride, excellent torque, and efficient fuel consumption — perfect for small to mid-range boats operating in various water conditions.
From everyday cruising to weekend fishing expeditions, the Amita 3 4111-093-08A ensures reliable thrust and impressive durability in both saltwater and freshwater environments. Built using advanced casting technology, the propeller promises enhanced hydrodynamics and long-lasting performance, making it a top pick for marine enthusiasts.
Overview / What Is Amita 3 – Evinrude/Johnson (9.25 x 8″) Solas RH Propeller, 4111-093-08A
The Amita 3 propeller is an affordable, durable, and efficient solution for boaters using Evinrude and Johnson outboards. This 9.25 x 8″ model is ideal for applications that require moderate torque and a balanced mix of speed and control. Whether navigating tight marina spaces or cruising in open waters, this aluminum prop ensures reliable performance every time you turn the key.
The three-blade design offers better acceleration and improved handling at low and medium speeds, while the 8″ pitch provides a boost in RPMs, allowing smaller engines to perform at their peak without sacrificing fuel economy. Its anti-corrosive finish adds protection against harsh marine conditions, ensuring consistent performance over time.
Key Technical Specifications
- Diameter: 9.25 inches
- Pitch: 8 inches
- Rotation: Right-Hand (RH)
- Blades: 3-blade configuration
- Material: High-strength aluminum with protective coating
- Compatibility: Evinrude/Johnson outboards (8-15 HP)
This combination of specs makes the Amita 3 – 4111-093-08A an excellent choice for general-purpose boating, from fishing to recreation.
How to Install Amita 3 Propeller for Marine Engines
Installing a marine propeller might sound technical, but the Amita 3 makes it simple. Whether you’re replacing a worn-out prop or upgrading your current setup, follow these basic steps:
- Turn off the engine and engage the neutral gear.
- Remove the cotter pin and the existing propeller nut using a prop wrench.
- Slide off the old propeller and inspect the shaft for fishing line, corrosion, or debris.
- Grease the propeller shaft with waterproof marine grease to prevent rusting.
- Install the new Amita 3 propeller, making sure it slides smoothly over the splines.
- Reinstall the washer, tighten the prop nut to specification, and secure with a new cotter pin.
Always refer to your engine manufacturer’s manual for torque specs and safety instructions.
Comparing Amita 3 Propeller Sizes: Why Choose 9.25 x 8″
Understanding the difference between propeller sizes is essential to choosing the right one. The 9.25 x 8″ Amita 3 hits the sweet spot for engines that need a balance of top-end speed and low-end torque. Compared to the 7″ pitch version, the 8″ pitch will slightly reduce acceleration but increase fuel efficiency and top cruising speed.
This makes the 9.25 x 8″ configuration ideal for lighter boats or those used for longer trips where cruising comfort and efficiency are priorities. It’s one of the best Amita 3 propeller options for users seeking an upgrade that enhances both power and performance.
Maintenance Tips
To ensure the Amita 3 propeller serves you season after season, follow these proven maintenance practices:
- Rinse After Use: After saltwater use, rinse the propeller with fresh water to remove salt deposits and prevent corrosion.
- Inspect Regularly: Look for chips, cracks, or dings in the blades. Even minor damage can affect performance and fuel economy.
- Lubricate: Apply marine grease to the propeller shaft periodically, especially before and after long-term storage.
- Check for Obstructions: Remove any weeds, lines, or debris entangled around the propeller shaft immediately to avoid seal damage.
- Balance Check: Unusual vibration during operation can signal an imbalance. Replace or repair the prop as needed.
These simple propeller maintenance tips can extend the life of your Amita 3 and protect your outboard motor from unnecessary wear.
Expert Advice and Pro Recommendations
Marine professionals consistently recommend the Amita 3 – 4111-093-08A for its durability, versatility, and affordability. It’s perfect for boaters who want dependable performance in a lightweight, corrosion-resistant package. If you operate in shallow or weed-heavy environments, this aluminum prop provides great durability at a fraction of stainless steel’s cost.
For optimal performance, check your engine’s WOT (Wide Open Throttle) range. The Amita 3 in an 8” pitch is excellent if you want higher RPMs and better acceleration under load. It’s especially helpful when dealing with strong currents or additional weight onboard.
Buy now: Amita 3 – Evinrude/Johnson (9.25 x 8″) Solas RH Propeller, 4111-093-08A and use 5% off code WELCOME5
Benefits of Right-Hand Rotation Marine Propellers
Right-hand (RH) rotation propellers, like the Amita 3 – 4111-093-08A, are the most commonly used configuration in outboard motors. This type of propeller spins clockwise when viewed from the rear and is compatible with most single-engine setups.
Advantages include:
- Improved fuel economy due to optimized torque distribution
- Stable and predictable maneuvering characteristics
- Enhanced compatibility with older Evinrude and Johnson engine models
For single engine boats, RH rotation ensures easier steering and better balance under normal conditions. If your boat tends to lean or pull in one direction, reviewing your rotation direction is a key step in troubleshooting propeller performance.
Detailed FAQ Section
Is the Amita 3 9.25 x 8″ propeller suitable for both saltwater and freshwater?
Yes, the Amita 3 4111-093-08A is designed for use in both saltwater and freshwater environments. Its aluminum construction is finished with a corrosion-resistant paint that helps protect against rust, salt, and marine debris. Still, it’s essential to rinse the propeller with fresh water after each saltwater outing and apply a protective lubricant periodically. These measures help preserve the finish and internal components, extending its lifespan and maintaining optimal performance in all marine environments.
How does pitch affect my boat’s performance?
Pitch refers to the distance the propeller moves forward with each rotation. A lower pitch (like 7″) provides greater acceleration and torque, making it suitable for heavy loads or towing. An 8″ pitch, like in this Amita 3 model, offers a good balance between acceleration and cruising speed. Higher pitch allows for better top-end speed but can reduce low-end power. Always choose a pitch that aligns with your boat’s weight, usage, and engine’s RPM range for optimal performance.
Can I install the Amita 3 propeller myself?
Yes, installing the Amita 3 4111-093-08A is a straightforward task that most boat owners can complete with basic tools. You’ll need a propeller wrench, marine grease, and a new cotter pin. After removing the old propeller, clean the shaft, apply grease, and fit the new one using the correct sequence. Make sure to tighten the nut to the manufacturer’s recommended torque. If unsure, refer to your engine’s manual or consult a marine technician for guidance.
What are the signs of a damaged or failing propeller?
Some signs include increased engine RPMs without speed gain, vibrations during operation, poor fuel efficiency, and difficulty planing. Visually, you may notice dents, dings, or chips in the blades. These issues affect the hydrodynamics and balance of the propeller, leading to engine strain and inefficient performance. If your boat suddenly starts behaving differently, inspecting your propeller should be a priority. In many cases, replacing it with a model like the Amita 3 can restore peak performance.
How long does the Amita 3 aluminum propeller typically last?
With regular maintenance and careful usage, the Amita 3 4111-093-08A can last between 3 to 5 years or more. Its aluminum alloy construction is strong and lightweight, offering durability for recreational and light commercial use. Avoid striking underwater obstacles, keep the shaft clean, and store the propeller properly during the off-season. Routine inspections and lubrication help extend the lifespan of the prop and prevent premature wear. Users consistently rate this model highly for longevity and value.
Conclusion
The Amita 3 – Evinrude/Johnson (9.25 x 8″) Solas RH Propeller, 4111-093-08A is a standout solution for boaters seeking enhanced performance, durability, and fuel efficiency. Its balanced pitch and sturdy construction make it perfect for various boating activities, from fishing to leisure cruising. With easy installation, reliable operation, and low maintenance requirements, it represents excellent value for your outboard engine. Whether you’re a seasoned mariner or weekend enthusiast, this propeller delivers where it counts — on the water.
Special Offer
WELCOME5 – Get 5% off storewide at allboatsupplies.com
🚀 Instant Assistance: Need help selecting the right product? Drop your contact in the chatbox at the bottom right corner, and our expert team will reply within 30 minutes with the best product suggestion for your boat — including a ready-to-use checkout link. We’re fast, knowledgeable, and always here for your boating needs!
No more guesswork — just message us and get a personalized checkout link for your antifouling system, fast!
Explore Our Best-Selling Ultrasonic Antifouling Products:
Buy now
Amita 3 – Evinrude/Johnson (9.25 x 8″) Solas RH Propeller, 4111-093-08A
Let us handle the hassle — expert support, quick replies, and smooth checkout. Your boat deserves the best.