Amita 3 – Evinrude/Johnson (9.25 x 10″) Solas RH Propeller, 2111-093-10

Q: What boats are compatible with the Amita 3 - Evinrude/Johnson (9.25 x 10") Solas RH Propeller?

The Amita 3 propeller fits Evinrude and Johnson outboard engines requiring a 9.25-inch diameter and 10-inch pitch right-hand rotation propeller. Suitable for small to mid-sized fishing boats, recreational cruisers, and utility boats, it excels in freshwater and light saltwater applications.

Q: How do I maintain the Amita 3 propeller to extend its life?

Rinse the propeller with fresh water after every use, inspect for blade damage regularly, and apply marine grease to the shaft during installation. Check propeller balance annually and repair minor dents promptly to ensure smooth operation and longevity.

Q: Can I install the Amita 3 Solas Propeller myself, and how?

Yes, by removing the old propeller, cleaning and greasing the shaft, sliding on the new propeller, and securing it with the prop nut and cotter pin as per the engine manual. Using correct torque and alignment is critical for safety and performance.

Q: What are the advantages of choosing the Amita 3 aluminum propeller over stainless steel?

Aluminum props like Amita 3 are lighter, more affordable, and easier to repair compared to stainless steel. They offer good corrosion resistance and performance for most recreational boating, though stainless steel may be better for high-speed or heavy-duty use.

Q: How can I troubleshoot common issues with the Amita 3 Solas propeller?

Check for blade damage or imbalance if vibration occurs, ensure the propeller is securely installed, and verify that pitch and diameter match your boat and engine. Clean regularly and remove debris from the shaft to maintain optimum performance.

Posted by

nikhil

On July 27, 2025

Comments Off

Amita 3 - Evinrude/Johnson (9.25 x 10") Solas RH Propeller, 2111-093-10 for marine

Introduction

The Amita 3 – Evinrude/Johnson (9.25 x 10″) Solas RH Propeller, 2111-093-10 stands as a pinnacle of innovation and reliability for marine propulsion systems. Designed specifically for Evinrude and Johnson outboard engines, this propeller combines aluminum durability with precise engineering to maximize your boat’s performance on the water. Whether you’re a recreational boater or a fishing enthusiast, this Solas RH (right-hand) propeller delivers exceptional thrust, improved fuel efficiency, and a smooth ride.

Crafted with attention to detail, the Amita 3 propeller caters to both professional marine applications and hobbyists seeking dependable propulsion equipment. Its optimal pitch and diameter dimensions of 9.25 inches by 10 inches strike the perfect balance between speed and torque, allowing your engine to run efficiently across various water conditions.

Amita 3 – Evinrude/Johnson (9.25 x 10″) Solas RH Propeller, 2111-093-10 for Boats & Marine Engines

Overview / What Is the Amita 3 – Evinrude/Johnson (9.25 x 10″) Solas RH Propeller?

The Amita 3 propeller is a high-quality aluminum propeller designed specifically for Evinrude and Johnson outboard motors, commonly used in recreational and commercial boating. Featuring a right-hand rotation (RH), it ensures compatibility with the majority of standard marine engines in this category.

This propeller’s 9.25-inch diameter paired with a 10-inch pitch is engineered to deliver excellent acceleration and top-end speed, making it ideal for a range of boating activities such as fishing, cruising, and water sports. Manufactured by Solas, a leading name in marine propulsion, the Amita 3 emphasizes durability, corrosion resistance, and balanced performance.

Key Features and Benefits

Durable Aluminum Construction: Lightweight yet tough enough to withstand harsh saltwater environments.
Optimized Pitch and Diameter: Provides a balance of speed and torque suitable for various watercraft.
Right-Hand Rotation (RH): Compatible with most Evinrude and Johnson outboard engines.
Improved Fuel Efficiency: Designed for smooth thrust delivery, reducing engine strain and fuel consumption.
Precision Engineered Blades: Minimizes cavitation and vibration for a quieter, smoother ride.

Additional Sections to Explore:

How to Install the Amita 3 Solas Propeller
Best Propeller Options for Evinrude/Johnson Engines
Amita 3 Propeller Maintenance Tips
Troubleshooting Common Propeller Issues

How to Install the Amita 3 Solas Propeller on Your Boat

Installing the Amita 3 – Evinrude/Johnson (9.25 x 10″) Solas RH Propeller is a straightforward process, but correct installation is critical to ensure optimal performance and safety. Before beginning, make sure you have the right tools: a propeller wrench, marine grease, and the propeller nut.

Start by removing your existing propeller carefully, checking for any damage on the propeller shaft or splines. Clean the shaft thoroughly and apply a thin coat of marine grease to prevent corrosion and ease future removal. Slide the Amita 3 propeller onto the shaft, ensuring the splines engage correctly. Secure it with the propeller nut, tightening it firmly but without over-torquing. Always install the cotter pin if your model requires one to prevent the nut from loosening during operation.

Best Propeller Options for Evinrude/Johnson Engines

Choosing the right propeller depends on your boating needs, engine specifications, and water conditions. While the Amita 3 Solas propeller is an excellent all-around choice for 9.25 x 10-inch sizing, other options may include stainless steel or composite materials offering varying degrees of durability and performance.

Aluminum props like the Amita 3 provide a cost-effective solution with reliable performance and easy repairability. Stainless steel props, though more expensive, offer superior strength and can improve acceleration and top speed in high-performance boats. Composite propellers are lightweight and corrosion-resistant but may not offer the same durability under heavy loads.

Maintenance Tips for the Amita 3 Solas Propeller

Regular maintenance is essential to keep your Amita 3 propeller in top condition and extend its service life. Start by inspecting the propeller blades frequently for dings, bends, or corrosion. Even minor damage can reduce efficiency and cause vibrations that strain your engine.

After each boating trip, rinse the propeller with fresh water to remove salt, sand, and debris that can accelerate wear. Lubricate the propeller shaft and nut area with marine grease periodically to prevent corrosion and ensure smooth installation and removal. Additionally, balance checks can detect blade damage early, helping maintain smooth operation and fuel efficiency.

Expert Advice and Pro Recommendations

Experts recommend the Amita 3 – Evinrude/Johnson (9.25 x 10″) Solas RH Propeller for boaters seeking a balance of affordability, durability, and performance. Its aluminum build ensures quick response and smooth acceleration, making it a top pick for freshwater and light saltwater use.

For optimal results, pair the Amita 3 propeller with a well-maintained outboard motor and use the proper installation techniques to avoid common issues such as vibration or cavitation. Regular maintenance checks and prompt repairs can further enhance longevity and reliability.

Buy now: Amita 3 – Evinrude/Johnson (9.25 x 10″) Solas RH Propeller, 2111-093-10 and use code WELCOME5 for 5% off your purchase!

Understanding Amita 3 Propeller Troubleshooting

Occasionally, users may experience issues such as excessive vibration, poor acceleration, or reduced top speed with the Amita 3 propeller. These symptoms often indicate blade damage, improper installation, or mismatched propeller specifications for the boat and engine.

If you notice vibration, inspect the blades for nicks or bends. A damaged blade can unbalance the propeller and cause engine strain. Also, verify that the propeller is securely fastened and the shaft is free of debris. If performance issues persist, consider whether the pitch and diameter are appropriate for your boat’s weight and typical load.

Detailed FAQ Section

What boats are compatible with the Amita 3 – Evinrude/Johnson (9.25 x 10″) Solas RH Propeller?

The Amita 3 propeller is designed primarily for use with Evinrude and Johnson outboard engines, especially models that require a 9.25-inch diameter and 10-inch pitch right-hand rotation propeller. This sizing suits a wide range of boats, including small to mid-sized fishing boats, recreational cruisers, and utility boats. Its aluminum build makes it especially suitable for freshwater and light saltwater applications where durability and corrosion resistance are needed. However, it’s important to always verify your engine’s specifications and boat manufacturer recommendations before purchasing to ensure compatibility and optimal performance.

How do I maintain the Amita 3 propeller to extend its life?

Proper maintenance is key to extending the life of your Amita 3 propeller. After every use, rinse the propeller thoroughly with fresh water to remove salt, sand, and other debris. Regularly inspect the blades for any nicks, bends, or corrosion that could impair performance. Applying marine grease to the propeller shaft during installation helps prevent corrosion and eases future removal. It’s also advisable to check the balance of the propeller annually, as imbalanced blades cause vibration and wear. If damage occurs, small dents can sometimes be repaired, but severe blade damage typically requires replacement. Following these maintenance tips ensures your propeller continues to deliver smooth, efficient propulsion over time.

Can I install the Amita 3 Solas Propeller myself, and how?

Yes, most boat owners can install the Amita 3 Solas propeller themselves with some basic tools and knowledge. First, remove the existing propeller by loosening the prop nut with a wrench. Clean the propeller shaft to remove old grease and debris. Apply a thin layer of marine grease to the shaft before sliding the new Amita 3 propeller onto the splines. Ensure it fits snugly and aligns properly. Secure it by tightening the prop nut to the manufacturer’s recommended torque, and insert a cotter pin if your setup requires it. Always consult your engine’s manual for specific instructions and torque values. If unsure, professional installation is recommended to prevent damage or improper fitting.

What are the advantages of choosing the Amita 3 aluminum propeller over stainless steel?

The Amita 3 aluminum propeller offers several advantages compared to stainless steel counterparts. Aluminum propellers are lighter and generally less expensive, making them an economical choice for many boat owners. They are easier to repair in the event of minor blade damage, such as dings or bends, which can often be fixed by a skilled marine technician. Additionally, aluminum’s lighter weight can improve acceleration and reduce fuel consumption slightly. However, aluminum may not be as durable as stainless steel under extreme conditions or high-speed performance boating. For most recreational applications, the Amita 3 aluminum propeller provides excellent value, corrosion resistance, and reliable performance.

How can I troubleshoot common issues with the Amita 3 Solas propeller?

Common issues with the Amita 3 propeller include vibration, reduced speed, and poor acceleration. If you experience vibration, inspect the propeller blades for damage such as bends or nicks, as these can unbalance the propeller and cause excessive shaking. Ensure the propeller is tightly secured to the shaft and that the shaft is free from fishing line or debris. Reduced speed or acceleration may indicate that the propeller pitch or diameter is not ideal for your boat and engine setup. In such cases, consider consulting a marine expert to select the correct propeller specifications. Regular cleaning and maintenance also prevent fouling, which can degrade performance. Addressing these issues promptly keeps your boat running smoothly and efficiently.

Conclusion

The Amita 3 – Evinrude/Johnson (9.25 x 10″) Solas RH Propeller is an outstanding choice for boat owners seeking a reliable, durable, and efficient aluminum propeller for their Evinrude or Johnson outboard engines. Its carefully engineered pitch and diameter optimize performance for a wide variety of boating activities, delivering smooth acceleration, fuel efficiency, and dependable thrust.

With proper installation and maintenance, the Amita 3 propeller will provide years of trouble-free service. Backed by expert recommendations and the trusted Solas brand, it represents an excellent investment for marine enthusiasts who want dependable propulsion without compromising quality or affordability.

Special Offer

WELCOME5 – Get 5% off storewide at allboatsupplies.com

🚀 Instant Assistance: Need help selecting the right product? Drop your contact in the chatbox at the bottom right corner, and our expert team will reply within 30 minutes with the best product suggestion for your boat — including a ready-to-use checkout link. We’re fast, knowledgeable, and always here for your boating needs!

No more guesswork — just message us and get a personalized checkout link for your antifouling system, fast!

Explore Our Best-Selling Ultrasonic Antifouling Products:

Buy now

Amita 3 – Evinrude/Johnson (9.25 x 10″) Solas RH Propeller, 2111-093-10

Let us handle the hassle — expert support, quick replies, and smooth checkout. Your boat deserves the best.

For more helpful marine maintenance guides, check out our article on Amita 3 – Mercury (9.25 x 9″) Solas RH Propeller, 1111-093-09.