Amita 3 – Honda (7.9 x 6.75″) Solas RH Propeller, 6011-079-06P
Introduction
If you’re looking for a high-quality, reliable propeller that enhances your outboard engine’s efficiency and performance, the Amita 3 – Honda (7.9 x 6.75″) Solas RH Propeller, 6011-079-06P stands out as a premier choice. Crafted with exceptional attention to detail, this aluminum propeller is designed specifically for Honda outboard engines, offering both durability and performance. Whether you’re a weekend boater or a seasoned marine professional, the Amita 3 delivers unmatched balance, speed, and control.
One of the most important components of any boat propulsion system, the propeller you choose can make or break your boating experience. And when it comes to aluminum propellers for outboard motors, Solas has built a reputation of excellence and reliability. The Amita 3 is no exception.
Overview / What Is Amita 3 Propeller
The Amita 3 – Honda (7.9 x 6.75″) Solas RH Propeller is a three-blade right-hand rotation aluminum prop designed to match with smaller Honda outboard engines. With a diameter of 7.9 inches and a pitch of 6.75 inches, it is engineered for smooth thrust, fuel efficiency, and ease of maintenance.
Constructed using state-of-the-art squeeze casting, this propeller features an improved blade geometry that ensures consistent performance. Solas focuses on exacting standards, ensuring each Amita 3 blade has the proper balance and pitch, which results in better acceleration and smoother cruising across all speeds.
- Model Number: 6011-079-06P
- Material: High-strength aluminum alloy
- Blades: 3
- Diameter: 7.9”
- Pitch: 6.75”
- Rotation: Right-hand
Top Benefits of Amita 3 Propeller for Marine Engines
The Amita 3 propeller isn’t just another propeller—it’s built with the boater in mind. From the moment of installation, it delivers noticeable improvements in propulsion efficiency and handling. Here are some key benefits:
- Superior Performance: Expect quick planing, better acceleration, and consistent top-end speed.
- Corrosion Resistance: The anti-corrosion coating ensures longer life in both freshwater and saltwater environments.
- Fuel Efficiency: Optimized blade shape helps reduce drag and increase fuel savings.
- Ease of Installation: Compatible with Honda engines using standard OEM hubs, it installs in minutes.
As a perfect match for lightweight boats, tenders, inflatables, and small outboards, the Amita 3 excels in all conditions. It also serves as a great backup propeller for emergency swaps when you’re out at sea.
Compatibility: Which Honda Engines Fit Amita 3?
The 6011-079-06P model is tailor-made for select Honda outboard motors, ensuring a seamless fit and optimal performance. If you’re running one of the following engines, this prop is likely your best bet:
- Honda 2.3HP – 5HP Outboards
- Honda BF2.3, BF5, BF4 (4-stroke)
- Any 7/8” shaft small engine with RH rotation
Not only does this compatibility make installation quick and easy, but it also ensures you’re getting the exact RPM, torque, and blade responsiveness Honda engineers envisioned for your outboard motor.
Maintenance Tips
Proper maintenance of your Amita 3 propeller can significantly extend its service life and maintain its performance. Here are some essential maintenance tips:
- Inspect regularly: Check for dings, cracks, or bends on each blade.
- Rinse after use: Always rinse the propeller with freshwater after using it in saltwater environments to prevent corrosion.
- Grease the shaft: Apply marine-grade grease to the prop shaft each time you reinstall the propeller.
- Tighten the nut: Ensure the prop nut is torqued according to Honda’s specifications.
By following these practices, you’ll keep your Amita 3 operating like new and avoid issues during your next boating adventure.
Expert Advice and Pro Recommendations
If you’re looking for a reliable and budget-friendly propeller for your small Honda engine, the Amita 3 is one of the best propeller options available today. Its solid aluminum build, refined blade design, and compatibility make it an excellent replacement or backup choice.
Whether you’re upgrading for better top-end speed or smoother maneuvering in tight marinas, this propeller delivers. Many marine pros suggest keeping at least one Amita 3 in your toolkit for emergency swaps. It’s a small investment that offers major peace of mind.
Buy now: Amita 3 – Honda (7.9 x 6.75″) Solas RH Propeller, 6011-079-06P — and don’t forget to use code WELCOME5 for 5% off!
How to Install Amita 3 Propeller
Installing the Amita 3 propeller is a simple process and can be done by most boaters in under 15 minutes. All you need is a socket wrench and marine grease. Here’s how:
- Remove the cotter pin and loosen the propeller nut.
- Slide the old prop off and clean the shaft thoroughly.
- Apply marine grease on the shaft to prevent seizing.
- Slide the Amita 3 onto the shaft, ensuring correct alignment.
- Tighten the nut securely and insert a new cotter pin.
Once installed, rotate the propeller by hand to check for smooth, unrestricted movement. It’s ready to hit the water!
Amita 3 Propeller Troubleshooting
If your boat is experiencing vibration, reduced speed, or unusual engine noise, your propeller could be the culprit. Here are common issues related to Amita 3:
- Vibration: Check for bent or damaged blades. Even a small ding can throw off balance.
- Overheating: Could be due to a loose fit or incorrect hub seating.
- Low speed: Inspect pitch and prop condition — excessive wear reduces efficiency.
By conducting visual inspections and addressing issues early, you can avoid expensive repairs later.
Detailed FAQ Section
What is the pitch and why is 6.75” important?
Pitch refers to how far the propeller moves the boat forward in one rotation, assuming no slippage. A 6.75” pitch like on the Amita 3 means it pushes the boat 6.75 inches per revolution. This low pitch is ideal for smaller boats, offering quicker acceleration and better control at lower speeds, which is perfect for fishing or navigating narrow marinas.
How does aluminum compare to stainless steel props?
Aluminum propellers like the Amita 3 are more cost-effective and lighter than stainless steel alternatives. They’re excellent for smaller engines and casual boating. Stainless steel offers higher durability but at a higher price. For most Honda outboards under 10HP, aluminum is ideal due to its balance of performance and affordability.
Can I install the Amita 3 on non-Honda engines?
Technically, yes—if the shaft size and spline count match. However, it’s recommended to use it only with compatible Honda engines to ensure optimal performance and avoid fitting issues. Always check your engine manual and compare shaft specs before purchasing.
How often should I replace my Amita 3 propeller?
Under normal use and with proper maintenance, an Amita 3 propeller can last several years. However, it’s wise to replace it if you notice any cracks, bends, or consistent performance drops. For those using their boats regularly in saltwater, annual inspections and possible biannual replacements are advisable.
Where can I buy the Amita 3 propeller at a discount?
You can purchase the Amita 3 – Honda (7.9 x 6.75″) Solas RH Propeller, 6011-079-06P from allboatsupplies.com. Use the coupon code WELCOME5 during checkout to receive 5% off your purchase. With fast shipping and expert support, it’s one of the best places to get marine products online.
Conclusion
The Amita 3 – Honda (7.9 x 6.75″) Solas RH Propeller, 6011-079-06P is a reliable, affordable, and efficient solution for small outboard Honda engines. Its robust construction, smooth performance, and easy maintenance make it a favorite among boaters of all experience levels. Don’t settle for less when it comes to propulsion—upgrade your boating experience with Amita 3 today!
Special Offer
WELCOME5 – Get 5% off storewide at allboatsupplies.com
🚀 Instant Assistance: Need help selecting the right product? Drop your contact in the chatbox at the bottom right corner, and our expert team will reply within 30 minutes with the best product suggestion for your boat — including a ready-to-use checkout link. We’re fast, knowledgeable, and always here for your boating needs!
No more guesswork — just message us and get a personalized checkout link for your antifouling system, fast!
Explore Our Best-Selling Ultrasonic Antifouling Products:
Buy now
Amita 3 – Honda (7.9 x 6.75″) Solas RH Propeller, 6011-079-06P
Let us handle the hassle — expert support, quick replies, and smooth checkout. Your boat deserves the best.
Read More
For more helpful marine maintenance guides, check out our article on Amita 3 – Evinrude/Johnson (9.25 x 11″) Solas RH Propeller, 2111-093-11.