Amita 3 – Suzuki (13 x 21″) Solas RH Propeller, 4411-130-21

Introduction

The Amita 3 – Suzuki (13 x 21″) Solas RH Propeller, 4411-130-21 stands out as a premium aluminum propeller designed to deliver performance, durability, and efficiency in marine propulsion systems. Whether you’re a recreational boater or a seasoned angler, this propeller offers superior handling, acceleration, and top-end speed tailored specifically for Suzuki outboard engines.

When it comes to marine propulsion, choosing the right propeller is crucial to achieving optimal engine performance. The Amita 3 propeller is one of Solas’ most reliable and best-selling models, known for its triple-blade design and robust aluminum build, perfectly engineered for Suzuki engines. Its refined pitch and diameter (13 x 21″) make it suitable for high-speed cruising and improved fuel efficiency, making it a top choice for marine enthusiasts worldwide.

Overview / What Is Amita 3 – Suzuki Propeller?

The Amita 3 – Suzuki (13 x 21″) Solas RH Propeller is a high-performance propeller specifically designed for Suzuki outboard motors. Manufactured by Solas, one of the leading names in the marine propulsion industry, this three-blade aluminum prop offers a perfect balance of strength, flexibility, and efficiency.

Its 13-inch diameter and 21-inch pitch provide optimal thrust and smooth operation in both saltwater and freshwater environments. The right-hand (RH) rotation ensures compatibility with most Suzuki marine engines, allowing for stable handling and fuel-saving performance. The use of high-quality squeeze-cast aluminum ensures superior structural integrity and resistance to corrosion, making it a preferred propeller for boaters demanding reliability and longevity.

Benefits of Using a 3-Blade Aluminum Propeller

Aluminum propellers like the Amita 3 are widely favored for their affordability, lightweight nature, and balanced performance. The three-blade configuration offers several specific benefits for marine applications:

• Improved Acceleration: Provides better hole shot for quicker take-offs.
• Fuel Efficiency: Optimized blade design ensures minimal drag and better fuel economy.
• Durability: Resilient against corrosion and impact damage from debris or shallow water.
• Easy Replacement: Lightweight aluminum makes it easier to handle and install compared to stainless steel alternatives.

The 13 x 21″ sizing on this propeller gives a powerful combination of speed and torque, making it ideal for mid-to-high horsepower outboards under various water conditions.

Compatibility with Suzuki Marine Engines

The 4411-130-21 model is specifically tuned for compatibility with a wide range of Suzuki outboard engines. Whether you’re running a DF90, DF115, DF140 or similar class engine, this propeller provides an OEM-level fit and performance. The hub kit is pre-installed for easy integration, saving time during setup or emergency swaps on the water.

This propeller is compatible with:

• DF90A/115A/140A models
• DF70-140 (4-stroke)
• 2-stroke engines (selected models from 75HP and above)

Its versatility and plug-and-play design make it a top contender among aftermarket propeller upgrades for Suzuki boat owners.

Maintenance Tips

Proper maintenance ensures the longevity and performance of your Amita 3 – Suzuki propeller. Below are essential maintenance tips:

1. Regular Inspection: Check for dings, chips, or bent blades after each trip, especially in shallow or debris-filled waters.
2. Grease the Shaft: Apply marine-grade grease to the propeller shaft regularly to prevent corrosion and ease removal.
3. Remove Annually: Take off the propeller at least once a year to clean the shaft and check for fishing line entanglement.
4. Check Fasteners: Ensure the propeller nut and washer are secure before every outing.
5. Store Correctly: If not in use, store the propeller in a dry, shaded area to prevent UV and environmental damage.

Expert Advice and Pro Recommendations

If you’re considering upgrading your propeller, the Amita 3 – Suzuki (13 x 21″) Solas RH Propeller is a reliable and performance-oriented choice. It’s recommended for boaters who frequently operate in open waters, demand quick planing, or require greater top-speed output. Its sturdy aluminum build and precision-cast blades offer a near-OEM experience at a more accessible price.

Buy now and enhance your marine performance with the trusted Amita 3 – Suzuki (13 x 21″) Solas RH Propeller, 4411-130-21. Use code WELCOME5 to enjoy 5% off your order today!

How to Install the Amita 3 Propeller on a Suzuki Outboard

Installing this propeller is simple and straightforward, especially if the hub kit is pre-installed. Here’s a step-by-step guide:

1. Place your outboard engine in neutral and remove the old propeller using a prop wrench.
2. Clean the shaft thoroughly and apply marine grease.
3. Slide the new propeller onto the shaft, aligning the splines.
4. Install the thrust washer, nut, and cotter pin securely.
5. Spin the prop to check for proper installation and clearance.

Always refer to your engine’s manual or seek professional assistance if unsure.

Performance Insights and On-Water Testing

Boaters who have tested the Amita 3 13 x 21″ Solas RH Propeller report a notable improvement in hole shot, top-end speed, and mid-range control. In choppy conditions, the propeller maintains stability without over-revving, a common concern with lower-pitch props.

It also delivers slightly higher fuel efficiency, particularly on DF115 and DF140 engines, making it a cost-effective solution in the long run. The 21-pitch configuration is ideal for faster runs while maintaining engine RPM within recommended thresholds.

Detailed FAQ Section

Is the Amita 3 – Suzuki (13 x 21″) Solas RH Propeller suitable for saltwater use?

Yes, the Amita 3 propeller is designed to perform in both freshwater and saltwater environments. Its aluminum construction is corrosion-resistant, especially when properly maintained with regular cleaning and greasing. However, it’s essential to rinse the propeller with fresh water after each saltwater trip to prevent corrosion build-up over time.

What horsepower range is best for the 13 x 21″ Amita 3 Suzuki propeller?

This propeller works best for engines ranging from 90HP to 140HP, particularly the DF90A, DF115A, and DF140A series from Suzuki. The 21-pitch blade offers higher speed capabilities, so it’s ideal for boats seeking enhanced cruising and planing power. It may not be ideal for underpowered boats or heavily loaded vessels that need more thrust.

How does this propeller compare with stainless steel options?

While stainless steel propellers offer slightly better durability and precision, aluminum props like the Amita 3 are more budget-friendly and easier to repair or replace. The trade-off is minimal for recreational users, especially with Solas’ high-quality aluminum casting. Unless you’re operating in highly abrasive environments or racing, this aluminum model provides ample performance.

Can I use this propeller as a replacement for my OEM Suzuki prop?

Yes, the 4411-130-21 Amita 3 model is designed as a direct aftermarket replacement and matches the OEM fit for most compatible Suzuki outboard motors. It comes with a pre-installed hub kit, which saves installation time and ensures proper alignment with your motor’s driveshaft.

What is the expected lifespan of this propeller?

With proper care and regular maintenance, the Amita 3 aluminum propeller can last several seasons or longer. Avoiding collisions, regularly checking for wear, and promptly cleaning off debris or salt buildup can greatly extend its service life. Always keep a spare on board to avoid downtime during emergencies.

Conclusion

The Amita 3 – Suzuki (13 x 21″) Solas RH Propeller is a trusted upgrade for Suzuki outboard owners who demand performance, reliability, and value. From its easy installation and precise pitch to its long-lasting build, this aluminum propeller checks all the boxes for recreational and semi-professional marine users.

Whether you’re cruising open waters or engaging in weekend fishing adventures, you can rely on the 4411-130-21 to keep your boat running smoothly. Don’t forget to use code WELCOME5 at checkout to save 5%.

Special Offer

WELCOME5 – Get 5% off storewide at allboatsupplies.com

🚀 Instant Assistance: Need help selecting the right product? Drop your contact in the chatbox at the bottom right corner, and our expert team will reply within 30 minutes with the best product suggestion for your boat — including a ready-to-use checkout link. We’re fast, knowledgeable, and always here for your boating needs!

No more guesswork — just message us and get a personalized checkout link for your antifouling system, fast!

Explore Our Best-Selling Ultrasonic Antifouling Products:

Buy now

Amita 3 – Suzuki (13 x 21″) Solas RH Propeller, 4411-130-21

Let us handle the hassle — expert support, quick replies, and smooth checkout. Your boat deserves the best.

Read More

For more helpful marine maintenance guides, check out our article on Amita 3 – Suzuki (13 x 19″) Solas RH Propeller, 4411-130-19.