Amita 3 – Yamaha (13.2 x 19″) Solas RH Propeller, 3411-132-19

Introduction

The Amita 3 – Yamaha (13.2 x 19″) Solas RH Propeller, 3411-132-19 is engineered for reliable marine propulsion. Specifically designed for Yamaha outboard marine engines, this right‑hand rotating aluminum propeller delivers robust thrust, efficient cruising, and long-lasting durability. Whether you’re fishing, towing, or cruising coastal waters, the Amita 3 Yamaha propeller marine brings superior acceleration and stability.

This propeller model is favored by professional marine users and recreational boaters for its precise fit and reliable performance. With its 13.2″ diameter and 19″ pitch, it optimizes mid‑range RPMs and top‑end speed, improving both fuel economy and handling.

Overview / What Is Amita 3 – Yamaha (13.2 x 19″) Solas RH Propeller?

The Amita 3 Yamaha propeller marine series is a trusted Solas line of cast-aluminum three‑blade outboard props. The 3411-132-19 variant features a 13.2″ diameter and 19″ pitch, making it ideal for a wide range of Yamaha outboard applications. As a right‑hand rotation model, it matches standard single-engine configurations.

Designed to OEM specifications, this propeller offers a corrosion-resistant finish and hydrofoil blade shape to minimize cavitation and vibration. The three‑blade format balances thrust and top speed, with enhanced handling and quieter operation.

Built from marine-grade aluminum, the Amita 3 prop ensures durability without excessive weight. It suits both freshwater and saltwater boating environments and withstands moderate load conditions with dependable thrust.

Key Features of the Amita 3 Yamaha Propeller RH

• OEM-Grade Precision: Perfect fit for compatible Yamaha outboard engines.
• Right-Hand Rotation: Standard direction for single-engine setups.
• Three-Blade Geometry: Strength, efficiency, and reliable performance.
• Hydrodynamic Design: Limits cavitation, smooths ride quality.
• Corrosion-Resistant Finish: Suitable for saltwater and freshwater zones.
• Optimized Pitch: 19″ pitch gives improved top speed without compromising low-end thrust.

Installation Guide: How to Install Amita 3 Yamaha Propeller

Installing the Amita 3 Yamaha propeller marine is a manageable DIY job with basic tools. Always begin with the engine powered off and key removed. Remove the cotter pin, prop nut, and old propeller. Inspect the prop shaft for any damage, debris or fishing line.

Apply high-quality marine grease to the shaft prior to placing the new 3411-132-19 propeller. Slide it on, tighten the prop nut to the torque specification in your Yamaha manual, and insert a new cotter pin. Ensure proper fit and rotation direction before testing in water.

If you’re unsure, consult a certified marine technician to confirm correct installation and avoid damage. Following the manual and using the right tools leads to a smooth experience.

Performance, Handling & Hydrodynamics

The Amita 3 Yamaha propeller marine excels in both acceleration and cruising. With its 13.2″ by 19″ dimensions, it helps your boat reach planing speeds faster, even under load. The increased pitch is ideal for boats carrying gear or towing skiers.

This right-hand prop reduces vibration, improves steering response, and minimizes prop walk. Users often note better fuel economy at mid RPMs due to the efficient blade design. Overall, it provides a crisp, quiet, and steady ride across diverse conditions.

Maintenance Tips

Proper maintenance ensures the longevity of the Amita 3 Yamaha propeller marine. Rinse the propeller thoroughly with fresh water after every saltwater outing to remove corrosion-causing salts. Inspect for dings, scrapes or fishing line entanglements each time it’s removed.

Monthly removal and cleaning of the prop shaft, followed by generous application of marine grease, prevents seizing and simplifies future maintenance. Store the propeller in a clean, dry, shaded place to avoid UV damage and oxidation.

Warning: Never attempt emergency repairs with temporary fixes like tape or sealants; always replace bent or damaged props to avoid engine stress or performance loss.

Troubleshooting & Fitment FAQs

Common issues with propellers include vibration, poor acceleration, or low top-end speed. The Amita 3 Yamaha propeller marine might not perform correctly if the pitch is mismatched or the prop is bent or misaligned. Ensure you have the exact 3411-132-19 version for your engine.

If experiencing cavitation or ventilation, check propeller blade condition and shaft alignment. Verify that the prop nut is torqued correctly and that the keyway is properly seated. Using the right pitch and diameter ensures optimum hole shot and cruising efficiency.

Expert Advice and Pro Recommendations

Professional marine technicians and advanced boaters often recommend the Amita 3 Yamaha propeller marine for those balancing performance, cost, and durability. It’s a great choice for mid-powered Yamaha engines where you want a responsive and efficient propeller without overspending.

Experts stress the importance of selecting propeller size relative to your boat’s weight, engine horsepower, and typical load. Keep a spare 3411-132-19 prop on board for long excursions to avoid downtime in case of underwater impact or damage.

For the best pricing and prompt delivery, buy now at Amita 3 – Yamaha (13.2 x 19″) Solas RH Propeller, 3411-132-19 and use code WELCOME5 to get 5% off your order.

Why Choose Amita 3 Yamaha Propeller Marine?

The quality cast-aluminum build makes this propeller lighter than stainless steel yet remarkably sturdy. The design reduces vibration and increases handling precision, resulting in a better boating experience. This makes the Amita 3 RH propeller a top-tier choice among aluminum propellers in the market.

Boat owners searching for the best Amita 3 options will appreciate the consistent durability, price‑to‑performance ratio, and widespread compatibility that the 3411‑132‑19 model offers.

Best Amita 3 Yamaha Propeller Options & Pitch Guide

Yamaha users must pick between different Amita 3 pitch options depending on load and boat speed requirements. The 13.2 x 19″ RH model suits boats carrying gear or heavier loads, while lower pitch options like 13.2 x 17″ provide quicker acceleration for lighter boats.

Consult your engine manual or performance charts to select the right pitch. If unsure, customer support is available for guidance on which Amita 3 Yamaha propeller marine model best matches your vessel and operating conditions.

Detailed FAQ Section

What boats are best suited for the Amita 3 Yamaha (13.2 x 19″) Solas RH Propeller?

The Amita 3 Yamaha (13.2 x 19″) Solas RH Propeller, model 3411‑132‑19, is best suited for mid‑size planing boats outfitted with Yamaha outboard engines in the horsepower range around 90‑200 HP. Its optimal pitch improves top‑end speed and handling when carrying passengers or gear. The right‑hand rotation fits standard single‑engine setups. For heavier load applications like fishing or towing sports equipment, the 19″ pitch helps maintain efficient cruising without sacrificing acceleration. If you’re unsure whether your boat’s hull type, weight, and engine power align with this propeller, contacting marine experts or referencing Yamaha fitment charts ensures accurate fit and performance. Choosing the correct prop can significantly impact fuel economy, acceleration, and overall handling.

How to install the Amita 3 Yamaha propeller marine correctly?

Installation of the Amita 3 Yamaha propeller marine begins with ensuring your engine is turned off and safely secured. Remove the cotter pin and prop nut, then slide off the old propeller and inspect the prop shaft. Clean away any debris, rust, or fishing line. Apply marine grease to the shaft to prevent seizing and ease future removal. Slide the new 3411‑132‑19 prop onto the shaft, align the keyway, tighten the nut to Yamaha torque specifications, and reinsert a new cotter pin. After installation, spin the prop manually to check for smooth rotation without binding. If uncertain, consult a professional marine mechanic. Proper orientation and torque ensure safe, optimal performance, preventing vibration or prop damage.

What maintenance tips extend the life of the Amita 3 Yamaha propeller marine?

Routine maintenance keeps your propeller in prime condition. After each use—especially in saltwater—rinse the prop thoroughly with fresh water and dry it before storage. Visually inspect the blades for dings, corrosion, or fishing line buildup monthly. Remove the prop and clean the prop shaft, then apply marine grease before reinstalling. Store the prop in a dry, shaded area to prevent UV and moisture damage. Replace bent or dented props promptly to avoid engine strain or cavitation issues. Regular checks and proper care can yield 3–5 years of reliable service from your Amita 3 propeller marine model.

How to troubleshoot common issues with this propeller?

If you notice vibration, poor acceleration, or drops in top speed, begin by inspecting the blades for damage or deformation. Check the keyway and shaft alignment for wear or bending. Confirm that the correct pitch (19″) is appropriate for your vessel and usage. Loose prop nuts or improper torque can cause slippage—tighten to spec and replace cotter pins. Verify that the prop is seated fully on the shaft and that the shaft is straight. Cavitation or ventilation may stem from incorrect pitch or excessive prop shaft exposure. Troubleshoot methodically—blade condition, installation accuracy, and pitch selection are usually the culprit.

Is the cost and durability of the Amita 3 propeller worth it?

The Amita 3 Yamaha propeller marine 3411‑132‑19 offers outstanding value. Aluminum construction delivers light weight and corrosion resistance at a lower cost than stainless steel alternatives. Durable under typical marine use, it withstands moderate impacts and maintains performance. While stainless steel props endure longer under extreme conditions, the Amita 3 provides a balance between cost, longevity, and performance—making it an ideal option for most boat owners seeking reliable propulsion without overspending. Considering its OEM-level design and dependable results, the investment pays off in consistent efficiency and ease of maintenance.

Conclusion

Overall, the Amita 3 – Yamaha (13.2 x 19″) Solas RH Propeller, 3411‑132‑19 is a top-tier aluminum option for Yamaha-equipped vessels. With its optimized pitch, quality build, and rust-resistant finish, it provides consistent performance, efficient cruising, and ease of installation. Whether you’re upgrading for speed or fuel economy, this propeller offers excellent marine performance at a competitive price. Elevate your boating with a trusted Solas propeller.

Special Offer

WELCOME5 – Get 5% off storewide at allboatsupplies.com

🚀 Instant Assistance: Need help selecting the right product? Drop your contact in the chatbox at the bottom right corner, and our expert team will reply within 30 minutes with the best product suggestion for your boat — including a ready-to-use checkout link. We’re fast, knowledgeable, and always here for your boating needs!

No more guesswork — just message us and get a personalized checkout link for your antifouling system, fast!

Explore Our Best-Selling Ultrasonic Antifouling Products:

Buy now

Amita 3 – Yamaha (13.2 x 19″) Solas RH Propeller, 3411-132-19

Let us handle the hassle — expert support, quick replies, and smooth checkout. Your boat deserves the best.

Read More

For more helpful marine maintenance guides, check out our article on Amita 3 – Yamaha (13.25 x 17″) Solas LH Propeller, 3412-133-17.