Amita 4 – Evinrude/Johnson (9.25 x 9″) Solas RH Propeller, 2113-093-09
Introduction
The Amita 4 – Evinrude/Johnson (9.25 x 9″) Solas RH Propeller, 2113-093-09 is a premium aluminum four‑blade outboard propeller designed for Evinrude and Johnson motors that demand reliability, performance, and durability. The 9.25″ diameter with 9″ pitch provides enhanced acceleration and efficient cruising for small to mid‑size boats. This Amita 4 propeller marine product is engineered to maximize thrust and handling across a variety of boating applications.
Specifically tailored for moderate speed and planing, the 2113‑093‑09 model offers better mid‑range torque and smoother transitions compared to lower‑pitch versions. If you’re looking for a prop that balances power, fuel efficiency, and control, this model offers a solid solution for recreational boaters, anglers, and working vessels alike.
Overview / What Is Amita 4 – Evinrude/Johnson 9.25×9″ Solas RH Propeller?
The Amita 4 – Evinrude/Johnson (9.25 x 9″) Solas RH Propeller 2113-093-09 belongs to Solas’s trusted Amita 4 family, offering a robust four‑blade aluminum prop for outboard motors. Its solid build and refined hydrodynamic blade shape deliver improved grip and reduced cavitation in varied water conditions.
With a pitch of 9″, it is optimized for slightly higher top speeds than the 8″ variant while maintaining strong mid‑range performance. This makes it an excellent best Amita 4 propeller marine option for boaters who need quick acceleration, smooth handling, and better fuel economy without sacrificing responsiveness.
- Blades: 4‑blade design
- Material: High‑strength squeeze‑cast aluminum
- Rotation: Right‑Hand (clockwise)
- Diameter: 9.25 inches
- Pitch: 9 inches
How to Install the Amita 4 9.25×9″ Propeller
Learning how to install the Amita 4 propeller marine model 2113‑093‑09 is straightforward. Begin by ensuring the engine is turned off and the ignition key removed, then follow these steps:
- Remove any existing propeller using a proper prop wrench.
- Clean the prop shaft, removing fishing lines or debris.
- Apply marine‑grade grease to the shaft to prevent corrosion.
- Slide the new Amita 4 propeller onto the shaft, aligning the keyway.
- Install thrust washer and spacer if required, then push fully into position.
- Tighten the prop nut to manufacture torque spec and secure with a new cotter pin.
After installation, run the engine briefly in shallow water to verify correct rotation and check for vibration or wobble.
Maintenance Tips
Proper care ensures your Amita 4 propeller marine performs well and lasts longer. Consistent maintenance is key:
- Regular Inspection: Before and after each session, check for nicks, cracks, or bent blades.
- Freshwater Rinse: Always rinse with freshwater after saltwater use to prevent corrosion.
- Shaft Greasing: Apply grease periodically to maintain shaft integrity and ease of removal.
- Cotter Pin Replacement: Replace the cotter pin every time the propeller is removed.
Additionally, balancing the blades and polishing minor dings can reduce vibration and enhance efficiency. Refer to your engine’s manual for torque specs when installing or inspecting.
Amita 4 9.25×9 Pitch – Performance Benefits vs. 8 Pitch
Choosing the correct pitch between the 9″ vs. 8″ variants is critical. The Amita 4 9.25×9″ propeller marine version offers distinct advantages:
With the higher pitch, you’ll experience improved top-end speed and better throttle response at cruising RPM. While the 8″ pitch excels in acceleration and load carrying, the 9″ version balances faster cruising with still-solid hole‑shot performance.
- Higher cruising velocity with moderate power increase
- More efficient at mid-range RPM for fuel economy
- Slightly less aggressive off-the-plane pickup than the 8″ model
For boaters prioritizing cruise speed and efficiency in calm inland waters, this pitch is usually the better choice. Anglers and load‑heavy use may find the 8″ more responsive for planing.
Troubleshooting and Common Issues
If your Amita 4 propeller marine is not delivering expected performance, check the following:
- Excessive vibration: Likely bent blades or unbalanced prop. Remove and inspect thoroughly.
- Poor top speed: If RPM is too high or low, wrong pitch may be installed. Consider the 8″ if acceleration is lacking.
- Cavitation or ventilation: Ensure shaft seal and anti-ventilation plate spacing are correct.
- Speed loss: Growth of marine fouling or debris can reduce thrust—clean regularly.
Address issues promptly to extend engine life and maintain optimal boat handling.
Expert Advice and Pro Recommendations
Marine experts and seasoned boat technicians emphasize the reliability and versatility of the Amita 4 – Evinrude/Johnson 9.25 x 9″ Solas RH Propeller. Whether cruising, towing, or fishing, this model delivers balanced performance with minimal compromise.
Buy now: Amita 4 – Evinrude/Johnson (9.25 x 9″) Solas RH Propeller, 2113-093-09 and use WELCOME5 for 5% off at checkout.
Detailed FAQ Section
What advantages does the 9″ pitch offer over the 8″ pitch in the Amita 4 propeller?
The 9″ pitch version of the Amita 4 ranges benefits when cruising efficiency and top‑end speed are priorities. While the 8″ pitch excels in quicker acceleration and planing, the 9″ strike a better balance of speed and fuel economy once on plane. It is particularly well‑suited to applications where you cruise at moderate RPM under load, benefiting from increased prop slip efficiency and smoother handling. The Amita 4 9.25×9″ configuration is ideal for recreational users who want comfortable cruising speeds without compromising mid‑range torque—a common need for anglers, family outings, or light towing. This version remains responsive at take-off but provides reduced engine strain at higher RPM, thus offering better overall marine performance.
Is the Amita 4 2113‑093‑09 suitable for freshwater and saltwater use?
Yes, the Amita 4 2113‑093‑09 is built with marine-grade squeeze‑cast aluminum, which resists corrosion in both freshwater and saltwater environments. When used in saltwater, rinsing the propeller thoroughly after each outing is essential for longevity. Applying grease to the shaft, inspecting for surface oxidation, and storing dry between uses significantly prolongs lifespan. For coastal or brackish operations, periodic polishing and possible coating can maintain hydrodynamic efficiency. In freshwater, corrosion is less severe, but regular inspection and cleaning are still recommended to ensure peak performance. This prop delivers consistent thrust and durability across environments when maintained properly.
How long will the Amita 4 2113‑093‑09 typically last?
Lifespan depends on usage, environmental exposure, and maintenance. With regular inspection, cleaning, and proper installation, the Amita 4 propeller marine often lasts several boating seasons—typically 3 to 5 years or more. Frequent impacts with underwater objects, neglecting shaft greasing, or prolonged saltwater exposure without rinse can shorten service life. Conversely, stored dry, cleaned, and balanced after dings, this model may serve vessels reliably beyond five years. Remember, even small blade deformities can impact fuel economy and performance, so periodic rebalancing and repair or replacement of compromised units is recommended to maximize efficiency and longevity.
Can I install the Amita 4 9.25×9″ propeller myself?
Yes, installing the Amita 4 propeller marine model is straightforward and DIY‑friendly. All you need is a propeller wrench, marine grease, and a new cotter pin. Most users can follow the installation guide or watch a tutorial to complete the swap. Key steps include cleaning the shaft, aligning the keyway, installing thrust washer and spacer if needed, tightening to spec, and inserting a fresh cotter pin. After mounting, perform a short test run to confirm rotation, alignment, and absence of vibration. Checking the engine manual for torque specs ensures the nut is properly secured without over‑tightening. If any uncertainty exists, a local marine technician can help, but most boat owners handle this themselves routinely.
What factors influence choosing the right Amita 4 pitch for my boat?
Selecting the correct pitch between the 8″ and 9″ variants involves considerations around engine horsepower, boat load, desired acceleration, and cruising speed. The Amita 4 9.25×9″ propeller marine is optimal for users wanting efficient cruising with stable mid‑range torque. If you run heavier loads, fish with gear, or require quick plane‑time on light displacement craft, the 8″ pitch may offer better initial power. Engine rpm at full throttle should fall within the recommended range printed on the outboard. If you experience low top‑end RPM (over‑revving) or sluggish takeoff, adjusting pitch can tune performance. Ultimately, balancing hole‑shot acceleration and cruise economy determines the right pitch choice.
Conclusion
The Amita 4 – Evinrude/Johnson (9.25 x 9″) Solas RH Propeller, 2113-093-09 delivers an excellent balance of thrust, efficiency, and smooth handling for recreational and light commercial boating. Its 9″ pitch sweet spot provides enhanced cruise speed without sacrificing mid‑range performance. Well-maintained, this propeller stands as one of the most reliable Amita 4 propeller marine options available today.
Special Offer
WELCOME5 – Get 5% off storewide at allboatsupplies.com
🚀 Instant Assistance: Need help selecting the right product? Drop your contact in the chatbox at the bottom right corner, and our expert team will reply within 30 minutes with the best product suggestion for your boat — including a ready-to-use checkout link. We’re fast, knowledgeable, and always here for your boating needs!
No more guesswork — just message us and get a personalized checkout link for your antifouling system, fast!
Explore Our Best-Selling Ultrasonic Antifouling Products:
Buy now
Amita 4 – Evinrude/Johnson (9.25 x 9″) Solas RH Propeller, 2113-093-09
Let us handle the hassle — expert support, quick replies, and smooth checkout. Your boat deserves the best.
Read More
For more helpful marine maintenance guides, check out our article on Amita 4 – Evinrude/Johnson (9.25 x 8″) Solas RH Propeller, 2113-093-08.