Amita 4 – Evinrude/Johnson (9.25 x 10″) Solas RH Propeller, 2113-093-10

Introduction

The Amita 4 – Evinrude/Johnson (9.25 x 10″) Solas RH Propeller, 2113-093-10 is a premium-grade aluminum propeller engineered to deliver unmatched performance for small to mid-sized boats equipped with Evinrude or Johnson engines. Crafted with precision and reliability in mind, this 4-blade propeller enhances acceleration, improves top-end speed, and ensures consistent thrust even under varying load conditions. Whether you’re cruising inland waters or navigating coastal environments, the Amita 4 Evinrude marine propeller guarantees smoother rides and superior fuel efficiency.

Built using state-of-the-art squeeze casting technology, the 2113-093-10 propeller ensures optimal strength, uniformity, and a longer lifespan compared to conventional cast aluminum propellers. If you’re seeking a reliable, corrosion-resistant solution for recreational boating or light commercial use, this Solas RH propeller is an ideal choice for your Evinrude or Johnson outboard engine.

Overview / What Is Amita 4 – Evinrude/Johnson (9.25 x 10″) Solas RH Propeller

The Amita 4 series from Solas represents a line of high-performance aluminum propellers specifically crafted for outboard motors. The 2113-093-10 variant is engineered for Evinrude and Johnson engines, featuring a 9.25-inch diameter and 10-inch pitch. Its 4-blade configuration offers better bite, improved hole-shot, and stronger performance during tight turns compared to 3-blade options.

Manufactured using precision squeeze casting, the Amita 4 aluminum propeller offers enhanced density and durability. The baked-on powder-coated finish ensures excellent corrosion resistance in both freshwater and saltwater environments. Designed to fit a wide range of outboards (8-15HP), this RH (right-hand rotation) propeller guarantees a perfect balance of performance and longevity.

Why Choose the 9.25 x 10″ Solas RH Propeller for Your Evinrude/Johnson Engine?

This specific 9.25 x 10″ model is ideal for smaller outboards used in fishing, dinghies, inflatables, and small runabouts. If you frequently navigate shallow waters or perform frequent docking, the 4-blade design offers better control and low-speed maneuverability than 3-blade designs.

The pitch and diameter combination ensures sufficient thrust and quick acceleration, making it perfect for quick getaways and cruising alike. It’s also compatible with the Solas Rubex hub system, making installation seamless and vibration-free.

Enhanced Propeller Performance with Squeeze Cast Aluminum

The Amita 4 Evinrude marine propeller utilizes squeeze casting—a manufacturing process superior to traditional die-casting. This process eliminates gas pockets and minimizes structural weaknesses, resulting in a dense, tough aluminum alloy blade that can withstand years of marine wear and tear.

Compared to standard aluminum propellers, squeeze-cast models like the Amita 4 retain sharper blade edges longer, resist flexing, and offer better RPM-to-thrust conversion. This means more power to the water and less engine strain, boosting overall fuel efficiency.

Maintenance Tips

Proper maintenance of your Amita 4 – Evinrude/Johnson (9.25 x 10″) Solas RH Propeller ensures longevity and peak performance. Here are some useful propeller maintenance tips:

• Inspect Regularly: Remove and inspect your propeller every 20-25 hours of operation. Check for dings, cracks, or bent blades.
• Clean After Every Use: After saltwater trips, rinse the propeller with freshwater to prevent corrosion.
• Grease the Shaft: When reinstalling the propeller, apply marine-grade grease to the shaft to prevent seizing and ensure easy removal later.
• Check for Fishing Line: Debris or fishing line wrapped around the prop shaft can damage seals. Clear it immediately.

Regularly maintaining your Amita 4 propeller helps preserve engine efficiency and ensures smooth boating experiences for years.

Amita 4 Propeller Installation Guide

Knowing how to install Amita 4 Evinrude marine propeller is essential for ensuring safe and efficient performance. The process is straightforward and takes less than 20 minutes with basic tools.

First, remove the cotter pin and loosen the propeller nut using a wrench. Slide off the old propeller and inspect the shaft for fishing lines or damage. Clean the shaft and apply marine grease. Place the Solas hub (if applicable) and then the new Amita 4 propeller. Secure with the washer and nut, then insert a new cotter pin.

Expert Advice and Pro Recommendations

Professional marine technicians consistently rank the Amita 4 – Evinrude/Johnson 9.25 x 10″ propeller as one of the best aluminum propeller options in its class. It’s highly recommended for boaters looking to upgrade their OEM prop with an affordable yet high-performing alternative.

If you want stronger hole shot, better cornering, and durability without the high cost of stainless steel props, this model is the smart choice. Plus, its compatibility with the Solas Rubex system means a quieter, more balanced ride.

Buy now: Amita 4 – Evinrude/Johnson (9.25 x 10″) Solas RH Propeller, 2113-093-10 — don’t forget to use code WELCOME5 at checkout for an exclusive 5% off.

Detailed FAQ Section

What makes the Amita 4 propeller better than a 3-blade model?

The primary advantage of a 4-blade propeller like the Amita 4 over a traditional 3-blade lies in its improved handling and acceleration. The extra blade provides additional surface area in the water, creating better grip and smoother thrust. This results in a quicker hole shot, better low-speed maneuverability, and greater stability during turns. Additionally, it’s ideal for boats frequently carrying heavy loads or towing.

How do I know if the 9.25 x 10″ size fits my Evinrude/Johnson engine?

The Amita 4 (9.25 x 10″) is designed to fit Evinrude/Johnson outboards ranging from 8HP to 15HP, depending on the model year and shaft length. To ensure compatibility, refer to your engine’s manual or consult with a marine mechanic. You can also check the OEM part number on your current propeller. This Solas prop is interchangeable with many factory OEM models.

Can I install this propeller myself?

Yes, most boat owners can install the Amita 4 Evinrude marine propeller themselves. It requires only basic tools like a socket wrench and marine grease. Always follow installation guidelines and torque specifications. Installing with a Rubex hub system makes the job even easier by reducing vibration and protecting the lower unit from shock.

Is this propeller suitable for saltwater use?

Absolutely. The Amita 4 propeller is coated with a durable, baked-on powder finish that protects the aluminum from corrosion caused by saltwater exposure. It’s ideal for both freshwater and saltwater boating. Just make sure to rinse it with fresh water after each use in saltwater to extend its lifespan.

How often should I replace my propeller?

Replacement depends on your usage frequency and environmental conditions. Generally, if your prop has visible dings, chips, or if you’re experiencing performance drops like poor acceleration or vibration, it’s time to replace it. With proper maintenance, the Amita 4 aluminum propeller can last several seasons.

Conclusion

The Amita 4 – Evinrude/Johnson (9.25 x 10″) Solas RH Propeller, 2113-093-10 delivers exceptional performance, corrosion resistance, and value. It’s the go-to choice for small boat owners looking for smoother handling, better acceleration, and long-term reliability. Whether you’re upgrading an aging OEM prop or boosting your boat’s efficiency, this Solas model provides a noticeable improvement at an affordable price.

Special Offer

WELCOME5 – Get 5% off storewide at allboatsupplies.com

🚀 Instant Assistance: Need help selecting the right product? Drop your contact in the chatbox at the bottom right corner, and our expert team will reply within 30 minutes with the best product suggestion for your boat — including a ready-to-use checkout link. We’re fast, knowledgeable, and always here for your boating needs!

No more guesswork — just message us and get a personalized checkout link for your antifouling system, fast!

Explore Our Best-Selling Ultrasonic Antifouling Products:

Buy now

Amita 4 – Evinrude/Johnson (9.25 x 10″) Solas RH Propeller, 2113-093-10

Let us handle the hassle — expert support, quick replies, and smooth checkout. Your boat deserves the best.

Read More

For more helpful marine maintenance guides, check out our article on Amita 4 – Evinrude/Johnson (9.25 x 9″) Solas RH Propeller, 2113-093-09.