Amita 4 – Suzuki (11.4 x 10″) Solas RH Propeller, 4313-114-10
Introduction
The Amita 4 – Suzuki (11.4 x 10″) Solas RH Propeller, 4313-114-10 is one of the most reliable aluminum propellers available for marine enthusiasts and professionals alike. Engineered for optimal performance on Suzuki outboard engines, this Solas right-hand propeller delivers efficiency, smooth acceleration, and enhanced durability even in challenging marine environments.
Whether you’re a weekend cruiser, fishing enthusiast, or marine professional, selecting the right propeller like the Amita 4 is critical for fuel economy, engine longevity, and performance. This particular model stands out in the category of Aluminum Propellers | Propulsion > Propellers > Outboard > Amita 4 for its exceptional build and cost-effective performance.
Overview / What Is Amita 4 – Suzuki Propeller?
The Amita 4 – Suzuki (11.4 x 10″) Solas RH Propeller is an aluminum four-blade propeller designed to fit specific Suzuki outboard engines. It combines modern hydrodynamic design with Solas’s proprietary casting technology, creating a product known for thrust, stability, and resistance against cavitation.
This propeller features a diameter of 11.4 inches and a pitch of 10 inches, perfectly suited for medium- to small-sized boats. It excels in low-to-mid RPM ranges, providing powerful thrust for quick planing and reliable towing capacity. Its right-hand rotation and precision-balanced blades ensure a smooth ride and optimal fuel usage.
Key Features of Amita 4 – Suzuki (11.4 x 10″)
- Material: High-grade aluminum with anti-corrosion coating
- Blade Count: 4-blade design for better acceleration and grip
- Size: 11.4-inch diameter and 10-inch pitch
- Rotation: Right-hand (RH)
- Compatibility: Fits select Suzuki outboard engines
How to Install Amita 4 Propeller on Suzuki Engines
Proper installation of the Amita 4 propeller ensures optimal performance and safety. Begin by disconnecting the battery, removing the existing propeller with a prop wrench, and checking for fishing lines or debris. Apply marine grease to the spline before fitting the new propeller to avoid corrosion.
Insert the new Amita 4 Suzuki marine propeller, aligning it with the drive shaft. Secure it with the thrust washer, prop nut, and cotter pin. Ensure it spins freely before reconnecting the battery and conducting a test run. Proper torque specification is crucial for safe boating.
Benefits of Four-Blade Propellers
Compared to three-blade variants, four-blade propellers like the Amita 4 provide enhanced thrust, especially during heavy load or towing conditions. They deliver better handling at lower speeds, increased hole shot, and smoother rides through rough waters.
The blade design also reduces ventilation and slippage, offering consistent grip and a more controlled boating experience. If you’re upgrading from a three-blade prop, you can expect improved maneuverability, better mid-range performance, and reduced engine strain with the Amita 4 – Suzuki propeller.
Maintenance Tips
To maximize the life and performance of your Amita 4 Suzuki marine propeller, regular maintenance is key. Rinse the propeller with fresh water after every trip, especially in saltwater environments. Remove barnacles, seaweed, or fishing lines wrapped around the shaft promptly.
Conduct visual inspections every few outings for cracks, dings, or bent blades. Also, check the propeller hub for signs of wear or damage. A damaged hub can cause vibrations and lower engine efficiency. Re-greasing the spline during installation and periodically is highly recommended.
Expert Advice and Pro Recommendations
For boaters frequently navigating shallow or rocky waters, having a spare Amita 4 – Suzuki (11.4 x 10″) Solas RH Propeller onboard is a smart strategy. Its affordable price makes it accessible, and the aluminum construction ensures good balance between strength and weight.
Buy now: Amita 4 – Suzuki (11.4 x 10″) Solas RH Propeller, 4313-114-10 and enjoy 5% off with code WELCOME5. Make sure to match the prop with your engine’s horsepower and mounting style to ensure peak compatibility.
Top Questions Before Buying a Suzuki Marine Propeller
Before investing in a propeller like the Amita 4 – Suzuki, buyers often wonder about size compatibility, performance differences between 3-blade and 4-blade props, and longevity. These are all valid considerations. The 11.4 x 10 size is ideal for mid-horsepower Suzuki outboards typically used for recreational boating and light work.
If your current propeller causes over-revving or sluggish performance, switching to a 4-blade prop with the right pitch like this model may solve the issue. Also, aluminum is more affordable and provides sufficient durability unless you’re operating under commercial or heavy-duty conditions.
Detailed FAQ Section
Is the Amita 4 – Suzuki (11.4 x 10″) propeller compatible with all Suzuki engines?
No, this specific propeller is designed to fit certain Suzuki outboard models, typically in the 25-60 HP range. Compatibility is influenced by the shaft size, spline count, and mounting setup of your engine. Always cross-check your engine manual or consult an expert at allboatsupplies.com to ensure proper fit. A mismatch may lead to poor performance or mechanical damage.
How do I determine if I need a 10” pitch propeller?
Propeller pitch directly affects your boat’s acceleration and top-end speed. A 10” pitch is ideal if you need better hole shot or your engine is under-revving with a higher pitch. Conversely, if you’re over-revving or experiencing excessive fuel consumption, downsizing to a 10” pitch may resolve it. It’s essential to test RPMs under load to find the ideal pitch for your boating needs.
What are the advantages of a 4-blade over a 3-blade propeller?
4-blade propellers like the Amita 4 provide increased surface area and grip in the water. This results in better acceleration (hole shot), smoother handling, and reduced ventilation. While 3-blade props may offer slightly higher top-end speeds, 4-blades excel in control, load handling, and overall thrust – especially in rough waters or for towing.
Can I repair a damaged Amita 4 aluminum propeller?
Minor dings and bent blades on aluminum props can often be repaired by a marine technician. However, deep cracks or hub issues may require full replacement. Keep in mind that an imbalanced or damaged propeller can reduce engine efficiency and increase fuel consumption. Always weigh repair costs against the price of a new propeller like the affordable Amita 4 – Suzuki model.
How long will this propeller last with proper maintenance?
With proper care, rinsing, and periodic inspection, an aluminum propeller like the Amita 4 can last 3–5 years or more. Usage frequency, water conditions, and impact damage are the key factors affecting lifespan. Storing the propeller in a dry, secure place when not in use and avoiding shallow rocky areas will significantly extend its life.
Conclusion
The Amita 4 – Suzuki (11.4 x 10″) Solas RH Propeller, 4313-114-10 is a high-quality marine propeller offering durability, excellent handling, and superior thrust. Its four-blade aluminum construction is ideal for Suzuki outboard engines, especially for boaters who prioritize performance, control, and value.
From weekend cruises to fishing trips, this propeller offers the right balance of power, efficiency, and cost-effectiveness. Paired with proper installation and regular maintenance, the Amita 4 will significantly elevate your boating experience.
Special Offer
WELCOME5 – Get 5% off storewide at allboatsupplies.com
🚀 Instant Assistance: Need help selecting the right product? Drop your contact in the chatbox at the bottom right corner, and our expert team will reply within 30 minutes with the best product suggestion for your boat — including a ready-to-use checkout link. We’re fast, knowledgeable, and always here for your boating needs!
No more guesswork — just message us and get a personalized checkout link for your antifouling system, fast!
Explore Our Best-Selling Ultrasonic Antifouling Products:
Buy now
Amita 4 – Suzuki (11.4 x 10″) Solas RH Propeller, 4313-114-10
Let us handle the hassle — expert support, quick replies, and smooth checkout. Your boat deserves the best.
Read More
For more helpful marine maintenance guides, check out our article on Amita 4 – Honda (10.5 x 14″) Solas RH Propeller, 3313-105-14.