Maretron TMP100-01 Temperature Module

Introduction

The Lowrance MARK ELITE4 Cover (model number 000-10495-001) is a must-have accessory for any boater or angler using the MARK or ELITE4 series fishfinders. Protecting your marine electronics from UV rays, water splashes, dust, and physical damage is crucial for extending their life and maintaining accurate readings. With a snug fit and durable design, this protective cover is tailor-made for the Lowrance MARK and ELITE4 screens. Whether you’re navigating open seas or fishing inland waters, a protective screen cover ensures that your gear remains in top-notch condition even in rough environments.

Let’s explore how the Lowrance MARK ELITE4 Cover enhances your electronics’ longevity, reliability, and appearance.

Overview / What Is Lowrance MARK ELITE4 Cover

The Lowrance MARK ELITE4 Cover is a rigid, form-fitting protective shell designed specifically for the Lowrance MARK and ELITE4 series GPS fishfinder displays. This accessory slips over the screen effortlessly and provides defense against scratches, sun damage, saltwater corrosion, and physical impact. Manufactured using marine-grade plastics, it’s durable, UV-resistant, and perfectly contoured to shield without obstructing buttons or ports.

Marine electronics are exposed to challenging environments every day. With the MARK ELITE4 cover, users gain peace of mind knowing their screens remain readable and protected when not in use or during high-speed travel. The small investment in a cover can prevent costly screen replacements or full device replacements.

How to Use and Install the Lowrance MARK ELITE4 Cover

One of the biggest advantages of the Lowrance MARK ELITE4 Cover is its simplicity in installation and removal. No tools are required. The cover is designed to click into place with gentle pressure and can be removed just as easily by hand.

Here’s how to properly use it:

1. Ensure your Lowrance MARK or ELITE4 display is powered off and clean.
2. Align the edges of the cover with the screen corners.
3. Apply gentle pressure until you feel the cover snap or slide securely into position.
4. To remove, pull gently from one side or corner without twisting to avoid cracking the plastic.

Always store the cover in a safe spot on board when not in use to prevent misplacement.

Top Reasons to Use Lowrance MARK ELITE4 Cover on Your Boat

Using the Lowrance MARK ELITE4 Cover isn’t just a matter of preference; it’s a smart move for protecting your investment. Here are a few critical reasons why:

• UV Protection: Direct sunlight can degrade screen quality over time. This cover blocks harmful UV rays.
• Prevents Scratches: Hard plastic cover shields the delicate screen from abrasions during transport or cleaning.
• Weather Resistance: Water droplets, sea spray, and salt can corrode exposed electronics. The cover acts as a barrier.
• Professional Appearance: Keeps your display looking clean and well-maintained.
• Easy to Replace: In case of loss or damage, the cover is inexpensive and easy to reorder.

Compared to the potential damage and costs from an unprotected screen, this accessory is a must-have for any serious boater or angler.

Maintenance Tips

Though the Lowrance MARK ELITE4 Cover is low-maintenance, following a few care tips will keep it functioning and looking new:

• Clean Regularly: Wipe the cover with a damp microfiber cloth to remove salt, dirt, or oils.
• Avoid Harsh Chemicals: Use only water or gentle marine-safe cleaners to prevent discoloration or cracking.
• Inspect for Cracks: Periodically check for signs of wear and replace if you notice any deep scratches or chips.
• Store When Not in Use: If removing for extended periods, place in a dry, shaded area to prevent accidental warping.

Proper care ensures maximum protection and extends the life of both the cover and your Lowrance display.

Expert Advice and Pro Recommendations

Professionals in the marine electronics industry strongly advocate the use of OEM covers like the Lowrance MARK ELITE4 Cover. Generic covers may not provide the same fit and protection, leading to gaps or loose-fitting enclosures that defeat the purpose.

Boating experts advise keeping a backup cover onboard and using it consistently when the GPS fishfinder is not in operation. During docking or trailering, your equipment is most vulnerable to scratches and impacts.

Buy now: Lowrance 000-10495-001 Cover For MARK/ELITE4 and enjoy 5% off using code WELCOME5.

Compatibility of Lowrance MARK ELITE4 Cover With Other Models

The Lowrance MARK ELITE4 Cover is specially crafted for MARK 4 and ELITE 4 series models. While it might fit some similarly sized units, it is not designed for wider screens or newer series like the ELITE Ti or HDS models.

Always verify your model number before purchasing. If you use a different Lowrance unit, consult the Lowrance compatibility chart or reach out to an authorized dealer for the correct part number. Fit is crucial—not just for aesthetics, but for functional protection.

Lowrance MARK ELITE4 Cover Cost and Durability

Priced affordably, the Lowrance MARK ELITE4 Cover offers incredible value. For under the cost of a tank of gas, you protect a fishfinder worth hundreds. When measured over time, the cost-per-use is mere cents.

Durability-wise, users report excellent resilience—even after years of sun, salt, and rough handling. This makes it one of the best cost-to-benefit accessories available for boaters. Combined with Lowrance’s product support and quality control, this cover is a smart long-term investment.

Detailed FAQ Section

Does the Lowrance MARK ELITE4 Cover fit the newer Elite Ti series?

No, the Lowrance MARK ELITE4 Cover is not compatible with the Elite Ti or HDS models. It is specifically designed for the MARK 4 and ELITE 4 series. While they may appear similar in size, the contours and button layouts differ. Using the wrong cover can result in poor fit and inadequate protection. Always refer to your unit’s manual or consult Lowrance support before purchasing a cover for any different model.

Can I use this cover while the device is powered on?

It’s not recommended to operate the fishfinder while the Lowrance MARK ELITE4 Cover is in place. The cover is intended for storage and transport protection only. Using it during active navigation could obstruct the screen or interfere with button access. For optimal performance, remove the cover during use and replace it immediately afterward to preserve the device.

Is the cover waterproof?

The Lowrance MARK ELITE4 Cover is water-resistant but not fully waterproof. It can protect against light splashes, rain, and humidity, but it is not designed to be submerged or used as a sealing enclosure. If you’re dealing with extreme marine environments, consider pairing the cover with additional waterproof enclosures or storage cases for full protection.

How can I prevent losing the cover while boating?

To avoid losing your Lowrance MARK ELITE4 Cover, always store it in a designated compartment when removed. Some users install small adhesive Velcro strips or tether systems for added security. It’s also a good idea to keep a spare onboard in case of accidental loss during transit, fishing, or maintenance activities.

Where can I find official support for installation or replacements?

You can get official support directly from the Lowrance support site, authorized retailers, or marine electronics dealers. Sites like allboatsupplies.com also offer full product descriptions, compatibility details, and live chat support to help you make the right choice.

Conclusion

For boaters who rely on their electronics day in and day out, the Lowrance MARK ELITE4 Cover is a small investment with massive protective value. It keeps your display clear, clean, and secure from environmental damage. Whether you’re storing your vessel, trailering across state lines, or simply fishing in unpredictable weather, this cover provides peace of mind and long-term durability.

Protect your marine electronics the smart way—with a dedicated, OEM-fitted solution from Lowrance.

Special Offer

WELCOME5 – Get 5% off storewide at allboatsupplies.com

🚀 Instant Assistance: Need help selecting the right product? Drop your contact in the chatbox at the bottom right corner, and our expert team will reply within 30 minutes with the best product suggestion for your boat — including a ready-to-use checkout link. We’re fast, knowledgeable, and always here for your boating needs!

No more guesswork — just message us and get a personalized checkout link for your antifouling system, fast!

Explore Our Best-Selling Ultrasonic Antifouling Products:

Buy now

Lowrance 000-10495-001 Cover For MARK/ELITE4

Let us handle the hassle — expert support, quick replies, and smooth checkout. Your boat deserves the best.