Raymarine Cyclone Power Cable A80654 25M Review & Tips

Introduction

The Raymarine Cyclone Power Cable A80654 25M is a crucial component for powering Raymarine’s high-performance Cyclone radar systems. Designed for vessels requiring extended cable lengths, this 25-meter solution ensures seamless connectivity, uninterrupted power delivery, and optimal radar performance, even in the harshest marine conditions.

Whether you’re outfitting a commercial vessel, offshore cruiser, or large yacht, the A80654 model delivers unmatched reliability and long-distance routing capabilities. Built to marine-grade specifications, it resists corrosion, UV damage, and physical stress while maintaining a low-profile, easy-to-route form factor. Choosing the correct cable ensures your radar performs as expected and doesn’t suffer from voltage drops, interference, or premature failure.

Overview / What Is Raymarine Cyclone Power Cable A80654

The Raymarine A80654 25M Cyclone Power Cable is engineered specifically to connect Raymarine’s Cyclone open-array radar systems to their power source. It delivers clean, uninterrupted power from the vessel’s electrical system to the radar unit over long distances without performance degradation.

This model is essential for boats with tall masts or bridge installations that require extended cable routing. Thanks to its enhanced shielding and rugged exterior, the A80654 is not just a long cable—it’s a highly specialized component designed for one of the most critical marine electronics on board: radar.

Key Features of the Raymarine A80654 25M Cyclone Power Cable

• Extended Reach: 25 meters (82 feet) for versatile routing options
• Marine-Grade Protection: UV-resistant outer jacket and corrosion-resistant terminals
• Radar-Specific: Engineered for Cyclone open-array radars
• Durability: High tensile strength for rugged marine environments
• Shielded Power Delivery: Ensures clean and interference-free power

This cable is part of Raymarine’s official accessories, meaning it’s fully supported and warranty-compliant when paired with their radar systems. Generic alternatives may not meet these strict requirements, leading to unpredictable performance or failure.

How to Install Raymarine A80654 25M Cyclone Power Cable

Installing the Raymarine Cyclone Power Cable A80654 25M is a straightforward process for any marine technician or experienced boat owner. It’s designed for ease of use, with pre-molded connectors and a flexible cable design that routes through confined spaces efficiently.

1. Begin by measuring the path from the radar dome to the power source to confirm the 25M length is appropriate.
2. Carefully route the cable through cable glands, conduits, or bulkhead openings, securing it with clips or cable ties.
3. Ensure bends maintain a proper radius to prevent internal conductor stress.
4. Connect the cable securely to the Cyclone radar’s power port and the power distribution panel or main power bus.
5. Perform a system power-up test to validate voltage delivery and radar operation.

If you need support or technical guidance, refer to the Raymarine installation guide or seek help through certified dealers such as Yamaha Outboards.

Raymarine Cyclone Power Cable Troubleshooting Tips

While the A80654 is built for maximum reliability, certain issues may arise if the cable is improperly installed or damaged over time. Here’s how to handle common problems:

• Radar Not Powering On: Check both cable ends for corrosion or poor contact. Test with a multimeter to confirm continuity.
• Voltage Drops: Ensure cable is not bent tightly or sharing space with high-power AC lines which may induce interference.
• Overheating: Inspect for pinch points or compressed cable sections where insulation may have been compromised.

Keeping an extra Raymarine Cyclone Power Cable A80654 25M on board is wise, especially for long voyages or mission-critical systems.

Best Raymarine Cyclone Power Cable Options for Different Boat Sizes

Raymarine offers multiple cable lengths to accommodate different boat configurations:

• Raymarine A80652 – 10M: Suitable for small to mid-size boats with compact radar placement
• Raymarine A80653 – 15M: Ideal for medium vessels or where moderate distance exists between dome and helm
• Raymarine A80654 – 25M: Best for large yachts, commercial fishing boats, or flybridge installations

Choosing the right length ensures minimal resistance, clean signal transmission, and safety in power delivery. Avoid daisy-chaining cables—opt for a single, uninterrupted connection.

Raymarine Cyclone Power Cable Maintenance Tips

While this cable is built to last, proper care extends its lifespan dramatically. Follow these Raymarine Cyclone Power Cable maintenance tips to ensure years of reliable use:

• Quarterly Inspection: Check the cable along its length for abrasion, UV damage, or rodent activity.
• Connector Cleaning: Use contact cleaner and a soft brush on connectors every 3–6 months, especially in salty environments.
• Dry Storage: During offseason or dry dock periods, disconnect the cable and store it in a cool, dry place.

Most problems arise not from the cable itself, but from environmental wear or improper handling. Take proactive care for best results.

Expert Advice and Pro Recommendations

Marine electronics professionals universally agree — always choose manufacturer-recommended accessories. The Raymarine Cyclone Power Cable A80654 25M is engineered to deliver consistent power and protect the radar’s sensitive internals from electrical anomalies. It also ensures compliance with Raymarine’s warranty terms.

Professionals also recommend avoiding unnecessary splicing or third-party connectors that could reduce power integrity or increase resistance. For complete radar protection and seamless performance, stick with genuine Raymarine cables.

Buy now and secure your marine radar’s power integrity. Raymarine A80654 25M Cyclone Power Cable – Use promo code WELCOME5 to get 5% off.

Detailed FAQ Section

Is the Raymarine Cyclone Power Cable A80654 compatible with all Cyclone radar models?

Yes, the A80654 is fully compatible with all Raymarine Cyclone open-array radar models. It’s part of the official Raymarine accessory lineup and designed specifically to meet the power demands and connector formats of the Cyclone radar family. Whether you’re using a 3′, 4′, or 6′ open-array system, this cable ensures that the radar receives uninterrupted and interference-free power. It’s important to avoid using third-party alternatives, as they may not support the full power requirements or could introduce damaging noise into the system.

Can I cut or shorten the 25M Cyclone power cable to fit my boat?

No, it is not recommended to cut, shorten, or splice the A80654 cable. Doing so may void your warranty, introduce electrical noise, or even lead to system failure. The 25-meter cable is engineered for optimal power delivery and electromagnetic shielding along its entire length. If the full 25M isn’t required, you should carefully route and coil the excess using wide, gentle loops. Avoid tight bends or compressing the cable, especially near power-intensive components.

What are the signs of a failing Cyclone power cable?

Common symptoms of a failing power cable include intermittent radar operation, failure to boot up, system reboots during use, or radar display flickering. Visually, you may see discoloration at the connectors, cracks in the insulation, or corrosion at the ends. If you notice any of these signs, inspect the cable fully or replace it immediately to avoid damage to the radar. The Raymarine Cyclone Power Cable A80654 25M is built tough, but every cable has a service life, especially under harsh marine conditions.

How do I safely route the A80654 cable through my vessel?

When routing the Raymarine A80654 25M cable, choose paths with minimal bends and low exposure to engine heat, sharp corners, or potential crush points. Use high-quality cable clamps every few feet to prevent sagging. Keep the cable away from high-frequency devices and power inverters that could induce interference. Always ensure cable entries into compartments are sealed with marine-grade cable glands to prevent water ingress. Proper routing preserves the cable’s integrity and helps ensure optimal radar function.

What is the average lifespan of the Raymarine A80654 25M Cyclone Power Cable?

With proper care, the A80654 power cable can last 7–10 years or more. Factors such as UV exposure, saltwater spray, improper handling, or installation near high-heat areas can shorten its lifespan. Regular maintenance, dry storage when not in use, and avoiding unnecessary strain will maximize its performance. Keeping spare connectors and a backup cable on board can help in emergency situations. Overall, investing in a genuine, long-lasting cable is far more cost-effective than dealing with radar downtime.

Conclusion

The Raymarine A80654 25M Cyclone Power Cable is the ideal long-distance radar power cable for serious boaters and commercial marine operators. Its durable design, marine-rated protection, and compatibility with all Cyclone models make it an essential investment for long-term performance. Don’t compromise your vessel’s safety by using generic cables. Instead, trust the original — engineered by Raymarine to perform in all sea conditions.

Special Offer

WELCOME5 – Get 5% off storewide at allboatsupplies.com

🚀 Instant Assistance: Need help selecting the right product? Drop your contact in the chatbox at the bottom right corner, and our expert team will reply within 30 minutes with the best product suggestion for your boat — including a ready-to-use checkout link. We’re fast, knowledgeable, and always here for your boating needs!

No more guesswork — just message us and get a personalized checkout link fast!

Let us handle the hassle — expert support, quick replies, and smooth checkout. Your boat deserves the best.

Read More

For more helpful marine maintenance guides, check out our article on Raymarine Cyclone Power Cable – Durable, Reliable, Must-Have.