SE116 1.47 Mod. Complete (Replaces Mercruiser Gen II)

Introduction

The SE116 1.47 Mod. Complete (Replaces Mercruiser Gen II) for Boats & Marine Engines is one of the most reliable and high-performance replacements available today for boaters seeking a complete sterndrive system. Designed to perfectly match Mercruiser’s Alpha One Gen II specifications, this aftermarket drive offers boaters a durable, cost-effective alternative that doesn’t compromise on quality. Whether you’re upgrading, replacing a worn-out unit, or planning your first installation, the SE116 1.47 Mod. Complete delivers unmatched reliability, smoother operation, and long-lasting performance in a marine environment.

This marine drive is especially engineered to fit seamlessly into your Alpha One Gen II transom assembly, making it an ideal choice for those looking to improve power transmission, torque distribution, and fuel efficiency. It features a 1.47 gear ratio—ideal for boats with higher horsepower engines that need faster top-end speed while maintaining mid-range torque.

Overview / What Is SE116 1.47 Mod. Complete?

The SE116 1.47 Mod. Complete is a full replacement marine sterndrive compatible with the Mercruiser Alpha One Gen II. It includes both upper and lower units pre-assembled and pressure-tested for ready-to-install use. With its 1.47 gear ratio, it is designed for boats with high RPM and horsepower needs, typically between 200–300 HP, and fits transom assemblies from 1991 and up.

This drive system is ideal for a wide range of boats, from leisure cruisers to performance speedboats. It is manufactured with precision-machined internal gears, heat-treated components, and zinc-anodized aluminum housing to resist corrosion. It meets or exceeds OEM specifications, making it a favorite among professional marine mechanics and boat owners alike.

Benefits of Upgrading to SE116 1.47 Mod. Complete

Upgrading to the SE116 1.47 Mod. Complete brings numerous benefits beyond simple replacement. Whether you’re replacing a worn-out Mercruiser drive or looking for better durability and performance, here’s what you gain:

• Precision Engineering: Offers seamless gear transitions and smoother power delivery.
• Affordable Pricing: Delivers OEM-equivalent performance at a significantly lower cost.
• Durability: Heat-treated gears and corrosion-resistant casing for long marine life.
• Ease of Installation: Direct fit with Mercruiser Alpha One Gen II transoms, reducing labor and downtime.

The drive is compatible with Mercruiser-style gimbal bearings, bell housings, and trim systems, so you don’t have to replace or modify any surrounding hardware.

How to Install SE116 1.47 Mod. Complete for Marine Engines

Installing the SE116 1.47 Mod. Complete is straightforward, especially if you’re replacing an existing Alpha One Gen II. Still, professional installation is recommended to ensure performance and safety. Here’s a simplified breakdown:

1. Inspect your gimbal housing and bellows for wear or damage.
2. Ensure your alignment tool properly fits into the gimbal bearing.
3. Apply marine-grade grease to the splines and u-joint shaft.
4. Install the drive using mounting bolts and torque to spec.
5. Connect the shift cable and trim hydraulics.
6. Pressure test and check fluid levels before launch.

Refer to your engine’s service manual or consult a certified marine technician for best results. A proper installation ensures your new SE116 1.47 Mod. Complete drive will perform flawlessly season after season.

Maintenance Tips

Just like any marine drive system, routine maintenance is critical for long-term durability and performance. Here are expert maintenance tips for your SE116 1.47 Mod. Complete:

• Fluid Check: Inspect and replace gear oil every 100 hours or annually.
• Visual Inspections: Look for leaks, paint bubbling (sign of corrosion), or misalignment.
• Grease Fittings: Keep u-joints, gimbal bearings, and other fittings greased regularly.
• Anode Replacement: Zinc anodes should be checked every 2-3 months and replaced if 50% eroded.

Using genuine or recommended marine lubricants and parts during maintenance ensures your SE116 1.47 Mod. Complete remains in peak operating condition throughout its lifecycle.

Troubleshooting Common Issues with SE116 Drives

Even the best marine drives occasionally encounter issues. Fortunately, the SE116 1.47 Mod. Complete is built with robust components to minimize failure. Here are some common problems and troubleshooting tips:

• Grinding noise during gear shift: This could indicate a misaligned shift cable. Inspect and adjust as needed.
• Water in gear oil: May result from failed seals. Pressure test the unit and replace suspect gaskets or o-rings.
• Overheating: Typically due to clogged water intakes or failed impeller. Clean strainers and replace impellers routinely.
• Loss of thrust: Check propeller for damage or excessive cavitation. Replace if needed.

Routine inspections and timely repairs are the keys to keeping your SE116 running optimally.

Expert Advice and Pro Recommendations

If you’re unsure whether the SE116 1.47 Mod. Complete is the right match for your boat, consider these expert tips:

• Engine HP Match: Ideal for 200-300 HP engines. Overpowered engines may need a higher ratio drive.
• Gear Ratio Selection: 1.47 ratio is perfect for performance-oriented boats looking for top-end speed.
• Transom Compatibility: Designed for 1991+ Mercruiser Gen II transom assemblies—no modifications required.
• Installation Assistance: Buy from a vendor that provides technical support and warranty coverage like allboatsupplies.com.

Buy now: SE116 1.47 Mod. Complete (Replaces Mercruiser Gen II) — use code WELCOME5 for 5% off.

Detailed FAQ Section

What engines are compatible with the SE116 1.47 Mod. Complete?

The SE116 1.47 Mod. Complete is compatible with most Mercruiser marine engines in the 200–300 HP range that originally used an Alpha One Gen II sterndrive. This includes models like the 5.0L, 5.7L, and 6.2L MPI engines. It fits all Mercruiser Gen II transom assemblies from 1991 onward without requiring modification, making it a direct bolt-on replacement.

How do I maintain my SE116 1.47 Mod. Complete to ensure a long lifespan?

Regular maintenance includes changing the gear oil annually or every 100 hours, greasing the u-joint and gimbal bearing, and checking for water intrusion or corrosion. Also, replace your anodes regularly and perform pressure tests every season to ensure seals are intact.

Can I install the SE116 1.47 Mod. Complete myself, or do I need a professional?

If you have mechanical experience with marine drives and access to the right tools, self-installation is possible. However, it’s recommended to use a certified marine mechanic to ensure proper alignment, torque settings, and gear engagement, which are critical for performance and warranty validity.

What is the warranty on the SE116 1.47 Mod. Complete?

Most authorized resellers, including AllBoatSupplies, offer a 3-year fault-free warranty on the SE116 1.47 Mod. Complete. This covers manufacturing defects and failures due to normal use under recommended conditions.

Is the SE116 1.47 Mod. Complete better than a factory Mercruiser replacement?

In many ways, yes. The SE116 is built with the same or better materials, includes rigorous pressure testing, and often comes at a more affordable price. For budget-conscious boaters who want OEM-level performance, it’s a smart, dependable alternative.

Conclusion

The SE116 1.47 Mod. Complete (Replaces Mercruiser Gen II) is a powerful, dependable marine drive solution for anyone operating in the Alpha One Gen II platform. It delivers OEM-level performance at a competitive price and offers easy compatibility, especially for those seeking fast acceleration and speed with high horsepower engines. Whether you’re upgrading or replacing, this drive ensures you enjoy the water with confidence, efficiency, and reliability.

Special Offer

WELCOME5 – Get 5% off storewide at allboatsupplies.com

🚀 Instant Assistance: Need help selecting the right product? Drop your contact in the chatbox at the bottom right corner, and our expert team will reply within 30 minutes with the best product suggestion for your boat — including a ready-to-use checkout link. We’re fast, knowledgeable, and always here for your boating needs!

No more guesswork — just message us and get a personalized checkout link for your antifouling system, fast!

Explore Our Best-Selling Ultrasonic Antifouling Products:

Buy now

SE116 1.47 Mod. Complete (Replaces Mercruiser Gen II)

Let us handle the hassle — expert support, quick replies, and smooth checkout. Your boat deserves the best.