Tubing Retainer Strip EX2133 – Best & Worst Marine Uses

Introduction

When it comes to marine vessel maintenance and the longevity of critical onboard systems, having the right small components can make a significant difference. One such overlooked yet essential part is the Tubing Retainer Strip EX2133. Designed specifically for use with EX2133 arms, this strip ensures secure hose routing and optimizes the efficiency of marine washing systems. Whether you own a recreational boat or a commercial marine engine setup, investing in this retainer strip can dramatically improve durability and operational integrity. From avoiding unnecessary leaks to enhancing water pressure delivery, its impact is substantial.

Overview / What Is Tubing Retainer Strip EX2133

The Tubing Retainer Strip EX2133 is a marine-grade component specifically engineered to hold and secure tubing or hose lines that run through the EX2133 wiper arms. These arms are common in various high-performance marine vessels. The strip is designed to keep water tubing in place, preventing it from flapping, twisting, or detaching while underway or during high-speed operation. Its high-durability composite construction resists UV rays, saltwater corrosion, and general wear, making it ideal for long-term marine use.

As part of the washing system category, this strip plays an integral role in maintaining optimal water delivery to the wiper blades, keeping your vessel’s windshield clear during storms, high-speed splashes, or general deck cleaning. Without it, tubing may disconnect or degrade over time, compromising safety and visibility.

Why Proper Tubing Management Matters at Sea

Waterline integrity is vital on any vessel, particularly when integrated into systems like windscreen washing mechanisms. Unsecured tubes can vibrate against metal components, crack from UV exposure, or burst under pressure. The Tubing Retainer Strip EX2133 prevents such failures by keeping tubes aligned and shielded.

Additionally, these strips streamline installation, offering easy snap-in design mechanisms. Their rugged design ensures they hold strong, even during sudden course corrections or under heavy sea loads. Properly managed tubing reduces noise, improves flow rate consistency, and extends the life of your onboard systems.

Key Features of Tubing Retainer Strip EX2133

• Precision Fit: Custom-designed to match EX2133 arms for perfect alignment.
• High Durability: Built from salt-resistant polymers for prolonged marine use.
• Easy Installation: Clip-on mechanism ensures hassle-free assembly.
• Improved Flow Control: Prevents tube kinking or displacement during operation.
• Low Maintenance: Requires minimal upkeep once installed.

These features make it one of the best tubing retainer options for marine washing systems available today.

Maintenance Tips

Maintaining your Tubing Retainer Strip EX2133 ensures continuous performance of your wiper washing system. Here are some practical maintenance tips to help you get the most out of this component:

1. Monthly Inspection: Check the strip for signs of UV degradation or corrosion every month.
2. Secure Fit: Ensure the strip remains tight on the EX2133 arm and that the tubing hasn’t loosened.
3. Clean Connections: Use a soft brush and marine-safe cleaner to remove salt deposits around the strip area.
4. Replace Annually: While the component is durable, an annual replacement ensures peak efficiency.

These tubing retainer strip maintenance tips will extend the lifespan of your washing system and minimize potential malfunctions.

How to Install Tubing Retainer Strip EX2133

Installing the Tubing Retainer Strip EX2133 is a straightforward process. Begin by aligning the strip with the dedicated guide rails on the EX2133 wiper arm. Insert the tubing into the track and snap the strip into place, ensuring it securely grips the tubing along its length.

Make sure to leave slight slack at both ends to allow for arm movement during wiper operation. This ensures that pressure doesn’t build at any point, which could cause splits. If you’re unsure, you can consult tutorials on Yamaha Outboards for general marine rigging techniques that may help in understanding optimal routing practices.

Tubing Retainer Strip EX2133 Cost and Durability

The cost and durability of tubing retainer strips are among the most common concerns for boat owners. Fortunately, the EX2133 strip offers an excellent return on investment. With pricing typically under $20, it delivers years of dependable service without demanding constant upkeep or replacement.

Its polymer-based construction resists deformation, UV damage, saltwater corrosion, and mechanical stress. Whether you’re cruising through coastal spray or docked in sunny marinas, the strip retains its shape and performance throughout. Compared to cheaper alternatives, this product delivers consistent results with minimal effort, making it the best tubing retainer strip for marine engines and washing systems.

Expert Advice and Pro Recommendations

Marine professionals highly recommend pairing the Tubing Retainer Strip EX2133 with OEM EX2133 arms only. While some boaters attempt cross-matching with generic brands, this can lead to improper fitting, decreased efficiency, or premature part failure.

For best results, always replace tubing alongside the strip to avoid introducing aged or brittle hoses into a new installation. And remember, a well-routed hose system ensures not just effective washing but also extends the lifespan of pump motors by maintaining proper water flow and pressure.

Buy now: Tubing Retainer Strip for EX2133 Arms and use 5% off code WELCOME5

Detailed FAQ Section

How do I know if the Tubing Retainer Strip EX2133 will fit my boat?

The Tubing Retainer Strip EX2133 is specifically engineered to fit EX2133 wiper arms. To ensure compatibility, verify your existing wiper arm model number. If it matches EX2133, this strip is the precise fit. In cases where you’re unsure of your wiper model, you can consult your marine hardware manual or reach out to the manufacturer’s customer service. Most owners using marine wiper arms from top-tier brands like Roca, Exalto, or similar OEMs will find this product suitable if they’re using the EX2133 arm configuration. Still in doubt? Our team at AllBoatSupplies offers quick-fit verification through product chat support.

What is the average lifespan of the Tubing Retainer Strip EX2133?

Under normal marine use, the Tubing Retainer Strip EX2133 lasts between 2 to 5 years. However, lifespan can vary depending on factors such as UV exposure, saltwater intensity, and operational wear. Regular maintenance and cleaning will maximize longevity. Unlike cheaper options, this strip is built from marine-grade polymers that resist hardening, cracking, and chemical breakdown. If you frequently operate in harsh environments (e.g., open ocean or equatorial climates), annual replacement is ideal. Otherwise, a biannual inspection can help you spot wear signs before failure occurs.

Can I install the tubing retainer strip myself?

Yes, the Tubing Retainer Strip EX2133 is designed for quick, user-friendly installation. No specialized tools are required. The process involves aligning the tubing with the EX2133 arm’s groove, inserting it into the retainer strip, and clipping the strip into place. If you’re familiar with marine DIY installations, this should take less than 15 minutes. However, first-time users may wish to review instructional videos or contact technical support for guidance. Our support chat is always available with installation videos and tips to help you succeed on your first try.

What are the signs of a worn-out tubing retainer strip?

Common signs of wear include loosening of the tubing, visible cracks on the retainer surface, discoloration from UV exposure, or inconsistent washer fluid delivery. If you notice vibrations or tubing slipping during high-speed runs, inspect the strip immediately. In extreme cases, neglected retainer strips may completely detach from the arm, causing tube disconnection mid-operation. Avoid these issues by conducting a quick visual check before every trip. Proactive maintenance avoids costly repairs and water system failures in critical moments.

How much does a tubing retainer strip cost and where can I buy it?

The Tubing Retainer Strip EX2133 typically costs between $12 and $18 depending on the retailer. You can buy it directly from trusted marine suppliers like AllBoatSupplies. Compared to other tubing management solutions, this product is both cost-effective and built to last, offering long-term performance with a minimal investment. Combine it with our 5% off code WELCOME5 for even more savings. Buying from certified dealers ensures you receive genuine OEM-compatible parts backed by expert support.

Conclusion

The Tubing Retainer Strip EX2133 is an essential component in any marine washing system that uses EX2133 arms. It ensures fluid delivery remains consistent, safe, and secure in all sea conditions. From preventing tubing kinks to enabling easy maintenance, its benefits are clear for every boat owner seeking optimal system performance. Don’t wait until tubing failures jeopardize your visibility — upgrade your marine system with this small but mighty solution.

Special Offer

WELCOME5 – Get 5% off storewide at allboatsupplies.com

🚀 Instant Assistance: Need help selecting the right product? Drop your contact in the chatbox at the bottom right corner, and our expert team will reply within 30 minutes with the best product suggestion for your boat — including a ready-to-use checkout link. We’re fast, knowledgeable, and always here for your boating needs!

No more guesswork — just message us and get a personalized checkout link for your antifouling system, fast!

Explore Our Best-Selling Ultrasonic Antifouling Products:

Buy now

Tubing Retainer Strip for EX2133 Arms

Let us handle the hassle — expert support, quick replies, and smooth checkout. Your boat deserves the best.

Read More

For more helpful marine maintenance guides, check out our article on Humminbird AS-EC-QDE Cable Review: Best & Worst Insights.