Weld Mount AT-300 gun – Best & Worst Use Cases

Introduction

Marine environments demand precision, speed, and resilience—especially when it comes to installing wire tie mounts, studs, or accessories with adhesives. The Weld Mount AT-300 gun for Boats & Marine Engines is a professional-grade, manual adhesive dispensing tool built for consistent and easy application of Weld Mount’s acrylic adhesives. Whether you’re installing wire tie mounts in tight engine spaces or bonding studs onto vertical fiberglass walls, the AT-300 makes the task significantly more efficient and clean.

This guide takes a deep dive into every angle of the Weld Mount AT-300 gun for Boats & Marine Engines—from features and usage tips to expert advice and FAQs—ensuring you know exactly what you’re getting and how to get the best results from it.

Overview / What Is Weld Mount AT-300 gun for Boats & Marine Engines?

The Weld Mount AT-300 gun for Boats & Marine Engines is a manual, dual-component adhesive dispensing tool specially designed to work with 50ml Weld Mount cartridges, including AT-2010 and AT-8040 adhesives. It ensures precise mixing of the adhesive’s two components and consistent output with every squeeze.

Designed for boatbuilders, marine electricians, and DIY installers, this robust tool offers unmatched control and performance in tight marine spaces. The ergonomic grip allows easy maneuvering and continuous use without fatigue, making it an essential part of any marine electrical toolkit.

Key Features of the Weld Mount AT-300 gun

Why is this dispensing gun becoming a staple in marine installation kits? Here’s a look at what makes it stand out:

• Dual-Cartridge Dispensing: Designed for use with 50ml twin cartridges (1:1 or 2:1 ratio).
• Marine-Grade Performance: Delivers clean, even flow under marine-specific environmental conditions.
• Lightweight Yet Durable: Compact, non-slip handle perfect for tight corners and overhead installs.
• Easy Cartridge Loading: Quick snap-in system allows fast switching between adhesives.
• Consistent Bead Application: Minimizes waste and ensures optimal adhesion.

Whether you’re applying tie mounts, grounding studs, or bonding brackets, the Weld Mount AT-300 gun for Boats & Marine Engines keeps your hands steady and output consistent.

How to Use the Weld Mount AT-300 Adhesive Dispensing Gun

Here’s a step-by-step on how to properly install and use the Weld Mount AT-300 gun for Boats & Marine Engines:

1. Insert the 50ml cartridge into the slot.
2. Secure the cartridge and attach the mixing nozzle.
3. Apply steady pressure on the trigger for controlled adhesive dispensing.
4. After use, leave the nozzle on the cartridge to act as a cap.

This process ensures your adhesive remains uncontaminated and your next use is ready to go without cartridge clogs.

Best Uses for the Weld Mount AT-300 gun in Marine Installations

The Weld Mount AT-300 gun for Boats & Marine Engines is particularly valuable for projects involving:

• Securing cable tie mounts inside engine rooms
• Bonding grounding studs to vertical bulkheads
• Installing brackets or clips without drilling
• Maintaining structural integrity of composite materials

Since it operates without electricity, the AT-300 is ideal for boats, docks, and shipyards where power outlets may be unavailable or inaccessible.

How to Maintain Your Weld Mount AT-300 gun for Longevity

Just like any tool used in a harsh marine environment, maintenance is key for the AT-300 gun. Regular upkeep ensures precision dispensing and longer tool life. Here are the top Weld Mount AT-300 gun maintenance tips:

• Clean After Use: Wipe off excess adhesive from the tool with a solvent-soaked rag.
• Check Cartridge Clamps: Ensure that the snap-lock holds cartridges firmly in place.
• Store in Dry Area: Always store in a dry toolbox or container to avoid rusting or corrosion.
• Lubricate Moving Parts: Lightly oil the trigger mechanism and slide track monthly.

With these simple practices, your Weld Mount AT-300 gun for Boats & Marine Engines will deliver consistent performance for years to come.

Expert Advice and Pro Recommendations

Experienced marine technicians recommend pairing the AT-300 gun with Weld Mount’s high-performance adhesives like AT-2010 for wire tie mounts and AT-8040 for heavy-duty studs. Using OEM-matched tools guarantees optimal curing and stronger bonds in saltwater environments.

Always prep the surface thoroughly, apply adhesive evenly, and wait for the recommended curing time before placing stress on the bond. This ensures your installations last longer and hold up under vibration and water exposure.

Buy now: Weld Mount AT-300 Adhesive Dispensing gun and use 5% off code WELCOME5

Weld Mount AT-300 gun Troubleshooting Guide

Here are some common issues you may face and how to fix them when using the Weld Mount AT-300 gun for Boats & Marine Engines:

• Uneven Adhesive Flow: This may indicate a blocked or worn nozzle. Replace the nozzle immediately.
• Hard Trigger Pull: Clean and lubricate the gun’s track. Sticky triggers can impact adhesive ratios.
• Adhesive Not Curing: Ensure proper mixing. A broken plunger or incorrect cartridge can result in improper ratios.

Following these Weld Mount AT-300 gun troubleshooting tips will minimize delays and keep your project on track.

Weld Mount AT-300 gun Cost and Durability

Compared to electric or pneumatic dispensers, the AT-300 offers excellent cost-effectiveness for boaters and marine technicians. It is highly durable, corrosion-resistant, and doesn’t require external power—making it ideal for marine fieldwork.

Priced affordably, the Weld Mount AT-300 gun for Boats & Marine Engines is a long-term investment for anyone who frequently installs mounts, fasteners, or electrical hardware on the water.

Detailed FAQ Section

What types of adhesives can I use with the Weld Mount AT-300 gun?

The Weld Mount AT-300 gun for Boats & Marine Engines is compatible with 50ml cartridges in both 1:1 and 2:1 mix ratios. This includes Weld Mount adhesives like AT-2010 (acrylic) and AT-8040 (methacrylate). These adhesives are specially designed for marine use and create strong, water-resistant bonds on fiberglass, metal, or composite materials.

How do I load and unload cartridges in the AT-300 gun?

To load a cartridge into the AT-300 gun, open the clamp and slide in the 50ml cartridge. Ensure the mixing nozzle is properly attached. Pull the trigger to begin dispensing. To unload, reverse the pressure on the plunger and pull the cartridge out. Always remove and clean the nozzle after use to prevent clogging.

Can I use the AT-300 gun in a wet or high-humidity environment?

Yes. The AT-300 is designed for use in high-humidity or wet environments commonly found aboard boats. However, ensure the adhesive cartridge and bonding surface are dry and clean. Storing the gun in a dry place when not in use will extend its lifespan significantly.

How does the Weld Mount AT-300 gun compare to electric adhesive guns?

Electric guns may offer speed, but the AT-300 offers more control and simplicity—especially in areas where electricity isn’t readily available. It’s lightweight, portable, and doesn’t require batteries or charging. This makes it ideal for fieldwork and on-the-go marine repairs.

What safety precautions should I follow when using this tool?

Always wear gloves and eye protection when handling adhesives with the AT-300 gun. Avoid direct skin contact with adhesives and ensure good ventilation when working in enclosed spaces. Keep adhesive cartridges stored upright and away from heat sources.

Conclusion

The Weld Mount AT-300 gun for Boats & Marine Engines is a compact, affordable, and highly effective tool designed for marine adhesive applications. From securing cable mounts to bonding critical hardware, it provides control, reliability, and ease of use in even the most challenging environments.

Marine professionals trust this gun for both onboard installations and dockside repairs. When paired with Weld Mount adhesives, it delivers unmatched performance and long-lasting results.

Explore other trusted marine technologies from Yamaha Outboards for powering your adventures.

Special Offer

WELCOME5 – Get 5% off storewide at allboatsupplies.com

🚀 Instant Assistance: Need help selecting the right product? Drop your contact in the chatbox at the bottom right corner, and our expert team will reply within 30 minutes with the best product suggestion for your boat — including a ready-to-use checkout link. We’re fast, knowledgeable, and always here for your boating needs!

No more guesswork — just message us and get a personalized checkout link fast!

Let us handle the hassle — expert support, quick replies, and smooth checkout. Your boat deserves the best.

Read More

For more helpful marine maintenance guides, check out our article on Weld Mount SS Stud – Durable & Hassle-Free Marine Mount.