Lexor Plus – Suzuki (16 x 19″) Solas RH Propeller, 4571-160-19
Introduction
The Lexor Plus – Suzuki (16 x 19″) Solas RH Propeller, 4571-160-19 is a premium stainless steel propeller built to meet the demands of serious boaters using Suzuki outboard engines. Its innovative blade geometry and high-quality materials deliver superior acceleration, top-end speed, and reliable handling in diverse water conditions.
This article dives deep into the features, installation guide, maintenance tips, expert advice, and comprehensive FAQs. Whether you’re searching for how to install Lexor Plus Propeller or want to explore best Lexor Plus Propeller options for your vessel, this guide covers all you need to know.
Overview / What Is Lexor Plus Propeller?
The Lexor Plus Propeller is manufactured by Solas specifically for Suzuki outboards. With a 16-inch diameter and 19-inch pitch, it balances low-end torque with high-speed efficiency. Suited for mid-range to large runabouts, pontoons, and fishing boats, this propeller excels in both performance and durability.
Key highlights include:
- Marine-grade 17-4 PH stainless steel
- Optimized blade cupping and rake design
- Precise OEM fit for Suzuki lower units
- Superior resistance to cavitation and slippage
Blade Design and Hydrodynamics
The Lexor Plus 16×19 features advanced blade geometry. The cupped trailing edges boost thrust, especially during hole-shot acceleration. High rake angles improve lift and steering, reducing ventilation in rough water.
Optimized pitch and diameter reduce drag at cruising RPMs, enhancing fuel economy. Whether you’re doing Lexor Plus Propeller troubleshooting or troubleshooting vibrations, understanding blade design is essential.
Performance Comparison with Standard Props
Compared to standard aluminum props, the Lexor Plus 16×19 offers:
- 10–15% better acceleration
- Up to 8% fuel savings at cruising speed
- Increased speed consistency in choppy conditions
These performance gains make it a top contender among best Lexor Plus Propeller options.
How to Install Lexor Plus Propeller
Installation is straightforward:
- Ensure engine is off and tilted up.
- Remove cotter pin and nut using a prop wrench.
- Slide the Lexor Plus onto the shaft, aligning the hub properly.
- Reinstall thrust washer, prop nut, and cotter pin.
- Tighten to Suzuki’s torque specs and apply marine grease.
For detailed steps on how to install Lexor Plus Propeller, refer to your engine manual or product instructions. Proper installation avoids premature wear and slippage issues.
Maintenance Tips
Maintaining your Lexor Plus 16×19 is key to its longevity:
- Rinse with fresh water after saltwater use.
- Lubricate the prop shaft every few outings.
- Check for trapped fishing line and remove it.
- Inspect blades monthly for nicks or bends.
Following these Lexor Plus Propeller maintenance tips will help preserve performance and prevent damage.
Corrosion Resistance and Rust Prevention
Although stainless steel is corrosion-resistant, electrolysis and saltwater can still cause surface rust. Use anodes and ensure wiring ground straps are properly installed to combat galvanic corrosion.
A quick polish with marine-grade stainless cleaner can restore shine and extend life. These simple actions help maintain the propeller’s efficiency and appearance.
Lexor Plus Propeller Troubleshooting
Common issues include vibration, slipping, and cavitation. Here’s how to address them:
- Vibration: Check blade balance and alignment.
- Slippage: Inspect the rubber hub.
- Cavitation: Compare RPM with target specs and examine for dents.
Consistent monitoring and routine checks eliminate most performance issues before they escalate.
Expert Advice and Pro Recommendations
Marine professionals recommend the Lexor Plus 16×19 for boats operating in mixed conditions, where both acceleration and fuel efficiency matter. Its stainless steel blade retains shape and avoids warping compared to aluminum alternatives.
Choose this propeller if you’re seeking to boost engine response and cruising ability. Buy now: Lexor Plus – Suzuki (16 x 19″) Solas RH Propeller, 4571-160-19 and get 5% off with code WELCOME5.
Detailed FAQ Section
What horsepower range is the Lexor Plus 16×19 compatible with?
The Lexor Plus 16×19 is designed for Suzuki outboards ranging from approximately 90 to 200 HP. High rake and larger pitch provide smoother ride quality and better speed at mid to high RPMs. It’s particularly suited for high displacement hulls such as pontoon boats, bass boats, and offshore runabouts. Boats under 80 HP may not adequately load this prop, leading to higher slip and inefficiencies. Always verify your engine’s trim height and lower unit spline count. Proper engine trim ensures the Lexor Plus 19 pitch delivers optimal thrust without causing cavitation or RPM drop issues. Users frequently report improved hole-shot performance and a noticeable jump in cruise speed compared to OEM aluminum props.
How do I know if I need a 16×19 versus a 16×17 propeller?
The pitch difference (17 vs 19) affects engine RPM and speed. Choose a 16×19 if your engine runs below the maximum recommended RPM at full throttle—common in heavy or fully-loaded boats. A higher pitch propeller reduces engine RPM and increases top-end speed. Conversely, if you’re hitting or exceeding redline with the 16×17, switch to 16×19 for better efficiency and engine longevity. RPM testing should be done with two adults on board, calm water, and warmed engine. Aim for 5250-5500 RPM for most c.115-150 HP Suzuki engines. The Lexor Plus offers improved fuel economy and torque, making the 16×19 pitch ideal for those who prize ride comfort over acceleration alone.
Can I install the Lexor Plus myself safely?
Yes. Installation is supported by Suzuki’s manual. Common tools include a prop wrench and marine-grade grease. Remove the old prop as instructed, clean the shaft, and align the new Lexor Plus prop with the splines. Lubricate and torque to spec, then secure with the cotter pin. Always perform a sea trial to validate RPM, speed, and vibration. For beginners, recording pre- and post-install data helps ensure accuracy. If any issues arise—excessive vibration, poor performance, or trim problems—contact a marine technician. However, most users report the install took under 20 minutes and resolved performance complaints instantly.
How much faster is the Lexor Plus 16×19 compared to other props?
Independent testing shows gains of 2-4 mph in top speed and 1-2 mpg in fuel efficiency at cruising speeds. Acceleration from idle to 30 mph is faster by 0.5-1.0 seconds, improving responsiveness and hole-shot significantly. This class of stainless steel propellers consistently improves mid-range torque. For heavy or planing hulls, these improvements compound, offering better comfort and reduced throttle demands. Real-world reviews often note a “smoother glide and cleaner hole-shot”—attributes directly tied to the Lexor Plus hydrodynamic design. Note: full results depend on boat load, water conditions, and trim settings.
What care is required to prevent corrosion on a stainless steel prop?
Stainless steel is resilient, but salt and electrolysis cause corrosion if neglected. To protect your Lexor Plus, always flush with fresh water after each saltwater outing. Install sacrificial zinc anodes on the lower unit, and ensure electrical grounding is correct. A monthly stainless steel polish and inspection for pitting or tarnish will maintain performance and aesthetics. Store the boat tilted up to avoid constant water exposure. If any galling is observed, lightly wire brush the affected area and apply an anti-corrosion paste. These small steps uphold efficiency and long-term life.
Conclusion
The Lexor Plus – Suzuki (16 x 19″) Solas RH Propeller is an exceptional choice for boaters seeking performance, durability, and efficiency. With stainless steel strength, hydrodynamic design, and OEM compatibility, it elevates mid-range to high-speed boating experiences. Ideal for those who want peak performance and smoother rides, this propeller offers measurable gains without complicated installation. If you need improved speed, better fuel economy, and long-term reliability, the Lexor Plus 16×19 is hard to beat.
Special Offer
WELCOME5 – Get 5% off storewide at allboatsupplies.com
🚀 Instant Assistance: Need help selecting the right product? Drop your contact in the chatbox at the bottom right corner, and our expert team will reply within 30 minutes with the best product suggestion for your boat — including a ready-to-use checkout link. We’re fast, knowledgeable, and always here for your boating needs!
No more guesswork — just message us and get a personalized checkout link for your antifouling system, fast!
Explore Our Best-Selling Ultrasonic Antifouling Products:
Buy now
Lexor Plus – Suzuki (16 x 19″) Solas RH Propeller, 4571-160-19
Let us handle the hassle — expert support, quick replies, and smooth checkout. Your boat deserves the best.
Read More
For more helpful marine maintenance guides, check out our article on Rubex L4 (15.25 x 26″) Solas LH Propeller, 9574-153-26.