Navpod AG218 Angleguard 12″ Wide 1.25″ Tube Single Bend

Introduction

The Navpod AG218 Angleguard 12″ Wide 1.25″ Tube Single Bend for marine is the ultimate marine mounting solution for serious boat owners and marine technicians. Designed for use with GPS units, fishfinders, and navigation displays, this Angleguard offers durability, strength, and style in one sleek package. Its 12″ width and 1.25″ tubing provide the ideal support for larger pods, making it a trusted option for everything from center consoles to flybridges.

Crafted from high-quality 316 stainless steel, the Navpod AG218 ensures long-lasting performance even in the harshest marine conditions. Whether you’re upgrading your helm station or customizing a new electronics setup, this single bend Angleguard simplifies installation and enhances aesthetics.

Overview / What Is Navpod AG218 Angleguard?

The Navpod AG218 Angleguard for marine is a premium-grade mounting system engineered to securely hold marine electronics pods in a fixed, ergonomic position. The single-bend 1.25” tubing and wide 12” stance accommodate larger displays while enhancing viewing angles and structural integrity. Perfectly matched for open cockpit boats, sailboats, and motor yachts, this Angleguard allows clean cable routing and rock-solid installation without compromise.

Its compatibility with Navpod’s range of SystemPods and PowerPods makes it a reliable and professional-grade choice for any helm upgrade. Whether you’re running high-speed offshore runs or cruising inland waters, the AG218 keeps your electronics safe, visible, and stylishly mounted.

Top Applications and Boat Types Best Suited

The Navpod AG218 Angleguard is ideal for multiple vessel configurations. It fits perfectly on:

• Center consoles needing wider pods for dual displays
• Flybridge installations requiring stronger mounts
• Sailboats where internal cable routing is critical
• Sportfishing boats with high-vibration navigation zones

Because of its robust diameter and precise bend, it is also favored by marine professionals installing NMEA2000 systems, radar displays, and combo GPS-fishfinder units in tight helm layouts.

How to Install Navpod AG218 Angleguard

To install Navpod AG218 Angleguard, begin by identifying the correct pod or pedestal where the mount will be fixed. The base ends should align with your existing guard feet or pedestal mount plates. Secure them using stainless steel fasteners and marine sealant to ensure water ingress protection.

Route power and signal cables internally through the 1.25” tube diameter, using rubber grommets or seals at both ends. Avoid over-bending the cables and secure them with zip ties inside the tube. Once the pod is fixed, check for any rotational movement and tighten the mounting points as needed.

Maintenance Tips

Marine environments are known for their corrosion challenges. That’s why it’s essential to maintain your Navpod AG218 Angleguard for marine to preserve its longevity and aesthetic appeal. Here are some expert maintenance tips:

• Monthly Cleaning: Rinse with fresh water to remove salt and grime buildup.
• Stainless Polish: Apply stainless steel polish every few months to maintain shine and resist oxidation.
• Hardware Check: Inspect all fasteners annually and tighten any loose bolts.
• Seal Protection: Reapply marine-grade sealant if rubber seals show wear.

Regular attention will ensure your installation remains not only functional but visually pristine throughout the seasons.

Why Navpod AG218 Angleguard Is a Best-Seller

The Navpod AG218 Angleguard for marine is one of the best-selling products in its category due to its ability to provide both rugged functionality and elegant helm styling. It is frequently used by boatyards and OEM manufacturers due to its universal fit and long-lasting construction.

For boat owners looking to mount advanced electronics such as chartplotters or fishfinder displays, it provides unmatched stability. Its internal cable routing keeps decks clean and prevents wire exposure, which is critical for high-traffic areas.

Expert Advice and Pro Recommendations

Marine installers and professional boat builders consistently recommend the Navpod AG218 Angleguard due to its superior build and adaptability. Its 1.25″ tubing offers enhanced load support over narrower options, making it ideal for heavier or multi-unit displays. In high-performance boats or offshore cruisers, this stability can mean the difference between a cracked mount and a lasting helm layout.

Buy now: Navpod AG218 Angleguard 12″ Wide 1.25″ Tube Single Bend and use code WELCOME5 to get an exclusive 5% discount at checkout.

Best Navpod Angleguard Options Compared

When choosing the right Angleguard, it’s important to compare across the product line:

• AG18: 9.5” wide, 1” tube – great for smaller displays
• AG127: 9.5” wide, 1.25” tube, double bend – offers increased ergonomics
• AG218: 12” wide, 1.25” tube, single bend – best for larger pods and wider helm stations

For most applications involving dual screen displays or large multi-function displays (MFDs), the AG218 is the go-to choice. It delivers the space and rigidity required for top-tier electronics and complex wiring configurations.

Navpod AG218 Cost and Durability

Considering the harsh conditions marine products face, the Navpod AG218 Angleguard for marine offers exceptional long-term value. Its 316 stainless steel body resists pitting, rust, and UV degradation, maintaining both performance and appearance for years.

In terms of cost, the AG218 falls within the premium category — but with good reason. Its superior materials, design sophistication, and extended compatibility justify the investment. For serious boaters and professionals, it’s a no-brainer upgrade.

Detailed FAQ Section

What is the purpose of the Navpod AG218 Angleguard?

The primary function of the Navpod AG218 Angleguard is to provide a secure and reliable mounting solution for marine electronics, particularly Navpod display pods. With a 12” width and a 1.25” diameter stainless tube, it’s ideal for larger setups involving dual screens, chartplotters, or MFDs. Its single-bend design optimizes screen visibility and user ergonomics, especially on pedestal consoles or flybridges. The robust structure also helps protect expensive equipment from vibration and harsh marine conditions.

How do I know if the AG218 will fit my setup?

Fitment depends on two key factors: pedestal width and pod compatibility. The AG218 is 12” wide and is compatible with most Navpod SystemPods and PowerPods built for 1.25” tubing. Measure the distance between mounting holes or pedestal feet on your current helm. If it aligns with 12” spacing, and your pod accepts 1.25” tubing, the AG218 will likely fit perfectly. You can also verify compatibility through the product support team at allboatsupplies.com.

How do I maintain my Navpod AG218?

Maintenance is straightforward and essential for maximizing lifespan. Start by rinsing the Angleguard with freshwater after each trip to eliminate salt residue. Use stainless steel polish quarterly to preserve its shine and prevent oxidation. Check for loose mounting bolts at least twice a season. If you notice any corrosion or wear near the seals or mounting feet, clean the area and reseal with marine-grade silicone. These simple habits will keep your installation reliable and attractive year-round.

Can I install the AG218 Angleguard myself?

Yes, many boat owners successfully install the AG218 without professional assistance. The key is having the right tools: a power drill, stainless steel fasteners, marine sealant, and wire routing accessories. Follow the included instructions, or consult online guides. Most importantly, ensure your pod aligns with the 12” spacing and supports 1.25” tubes. Internal cable routing may require fishing tools or grommet kits. If you’re unsure, consider a marine installer for seamless integration.

What makes the Navpod AG218 better than generic mounts?

The Navpod AG218 Angleguard is specifically engineered for marine environments. Unlike generic mounts made from aluminum or plastic, the AG218 is constructed from premium 316 stainless steel for superior corrosion resistance. It features internal cable routing to hide wires and minimize weather exposure, which generic options often lack. The ergonomic bend enhances usability, and the wide stance improves stability for large electronics. These design advantages make it the preferred choice among marine professionals and OEMs alike.

Conclusion

The Navpod AG218 Angleguard 12″ Wide 1.25″ Tube Single Bend for marine is the go-to choice for serious marine electronics installations. Combining strength, style, and functionality, it supports larger pods and more demanding display setups with ease. Its robust stainless build and smart design deliver long-lasting value for boaters who refuse to compromise on quality.

Don’t settle for generic or flimsy mounts. Upgrade to the AG218 and give your helm the support and aesthetic it deserves.

Special Offer

WELCOME5 – Get 5% off storewide at allboatsupplies.com

🚀 Instant Assistance: Need help selecting the right product? Drop your contact in the chatbox at the bottom right corner, and our expert team will reply within 30 minutes with the best product suggestion for your boat — including a ready-to-use checkout link. We’re fast, knowledgeable, and always here for your boating needs!

No more guesswork — just message us and get a personalized checkout link for your antifouling system, fast!

Explore Our Best-Selling Ultrasonic Antifouling Products:

Buy now

Navpod AG218 Angleguard 12″ Wide 1.25″ Tube Single Bend

Let us handle the hassle — expert support, quick replies, and smooth checkout. Your boat deserves the best.