Navpod GP1040-17 SystemPod for Raymarine AXIOM 9
Introduction
For boaters and marine professionals relying on the precision of Raymarine navigation equipment, the Navpod GP1040-17 SystemPod for Raymarine AXIOM 9 offers the ideal combination of robust protection and streamlined installation. Designed specifically for the Axiom 9 Multi-Function Display and a 12″ pedestal guard, this pre-cut SystemPod ensures a factory-like fit, secure mounting, and a weatherproof seal to keep your electronics safe in harsh marine conditions.
Whether cruising coastal waters or venturing offshore, this Navpod enclosure is crafted for durability, UV protection, and long-lasting performance. If you’re looking for the best housing solution to enhance and protect your navigation gear, the GP1040-17 is your go-to option.
Overview / What Is Navpod GP1040-17 SystemPod for Raymarine AXIOM 9?
The Navpod GP1040-17 SystemPod is a pre-cut, weatherproof housing solution engineered for the Raymarine AXIOM 9 chartplotter and designed to mount securely to a 12″ wide pedestal guard. With its durable acrylic-capped ABS construction and tamperproof hardware, it ensures reliable protection and functionality in even the most extreme boating environments.
This model is part of Navpod’s SystemPod series, which provides boaters with professional-level mounting for electronic displays. The GP1040-17 is pre-drilled to accept the AXIOM 9 MFD and includes a watertight seal to prevent moisture intrusion. It also supports internal cable management for neat, safe installations on sailboats, powerboats, and commercial vessels alike.
How to Install Navpod GP1040-17 SystemPod for AXIOM 9
Proper installation is essential for both performance and safety. Here’s how to install the GP1040-17 on your helm station:
- Clean the pedestal guard thoroughly before installation.
- Align the AXIOM 9 display into the pre-cut front face of the pod.
- Secure the display using the included stainless steel tamperproof screws.
- Run all cables through the Navpod’s watertight cable gland system.
- Attach the pod to your 12″ guard using the reinforced mounting clamp.
For best results, use a marine-grade silicone around all grommets and inspect the seal after the first voyage. The pre-cut design minimizes errors and ensures a clean, professional look with minimal tools required.
Top Benefits of Using Navpod Axiom 9 SystemPod
Boaters appreciate the GP1040-17 SystemPod for more than its rugged construction. Here’s why it stands out:
- Perfectly Pre-Cut: No modifications required for AXIOM 9 installation.
- UV-Resistant Finish: Maintains color and shape under sun exposure.
- Waterproof Design: Full IPX6 rating for offshore use and heavy spray.
- Strong Build Quality: Impact-resistant ABS with acrylic coating for marine conditions.
- Secure Mounting: Tamper-resistant fasteners for theft and shock protection.
For serious navigators, protecting your investment in marine electronics is a top priority—and the GP1040-17 delivers on all fronts.
Understanding Pod Compatibility and Guard Sizes
Choosing the correct SystemPod requires a precise match between your device and guard size. The GP1040-17 is specifically made for:
- Display Unit: Raymarine AXIOM 9
- Guard Width: 12″ pedestal guards
If your guard width differs, Navpod offers alternative pods such as the GP1040-16 (for 9.5″ guards) and GP1050-19 (for 1.25″ diameter rails). Always confirm dimensions before ordering to ensure a seamless and secure fit.
Maintenance Tips
To ensure long-lasting performance, follow these maintenance recommendations for your Navpod SystemPod:
- Rinse Regularly: After every trip, rinse with fresh water to remove salt and dirt.
- Inspect Gaskets: Check silicone seals every few months for wear or detachment.
- Clean with Non-Abrasive Products: Use mild soap and a soft cloth to preserve the glossy finish.
- Protect from UV: Apply marine-grade UV protectant polish twice annually to prevent discoloration.
Routine care will help preserve the waterproof integrity and appearance of your Navpod GP1040-17 SystemPod for years to come.
Durability and Weatherproof Performance of Navpod Axiom 9 Marine Pods
The marine environment is unforgiving, with constant exposure to saltwater, sun, and wind. That’s why Navpod products like the GP1040-17 SystemPod are engineered with high-impact acrylic-capped ABS plastic. This material resists UV degradation, cracking, and warping, offering long-term reliability.
In addition to physical durability, the pod’s waterproofing system includes a double gasket seal and watertight cable gland to meet IPX6 waterproofing standards. This makes the GP1040-17 the ideal housing solution for offshore yachts, sportfishing vessels, and high-performance center consoles.
Expert Advice and Pro Recommendations
Marine electronics professionals consistently recommend the Navpod GP1040-17 SystemPod for those looking to protect and optimize their Raymarine AXIOM 9 displays. The precision-cut enclosure not only prevents environmental damage but also enhances readability and aesthetics on any helm station.
Yacht installers also favor this pod for its quick, tool-friendly setup, secure cable routing, and anti-theft screws. With professional installation or DIY, it represents a durable, smart investment in your marine electronics system.
Buy now: Navpod GP1040-17 SystemPod for Raymarine AXIOM 9 and use code WELCOME5 for 5% off your order.
Detailed FAQ Section
Is the Navpod GP1040-17 compatible with other Raymarine displays?
The GP1040-17 is pre-cut specifically for the Raymarine AXIOM 9. While it may physically fit other 9″ class displays, it is not recommended for use with any model other than the AXIOM 9, due to the custom cutout. Using an unmatched device could compromise waterproofing and mount security. Navpod offers a variety of other SystemPods for Raymarine c, e, and g series displays. Always refer to the Navpod compatibility chart or consult with a technician before choosing your pod.
What’s the difference between a 9.5″ and a 12″ guard, and why does it matter?
Guard width determines the spacing between the rails that hold your pod at the helm. A 9.5″ guard is narrower and typically found on compact helms, while a 12″ guard offers a broader, more stable mounting platform. The GP1040-17 is designed for 12″ guards and will not properly mount on narrower rails. Ensuring guard compatibility is crucial to avoid vibrations, gaps, or loose fittings during operation.
Can I drill additional holes into the pod for accessories?
Yes, you can modify the GP1040-17 pod by drilling holes, but it must be done cautiously. Drilling into the pod should only be performed with sealed cable glands or watertight accessories to maintain its IPX6 rating. Avoid placing holes near gasket seals or in load-bearing corners. If you’re unsure, it’s best to consult with a marine electronics installer to maintain waterproof integrity.
How does the cable routing system work inside the GP1040-17?
The internal cable management system of the GP1040-17 is designed to organize power, radar, sonar, and data cables within the pod. It includes a waterproof cable gland at the rear to pass cables into the pod while keeping water out. Once inside, cables can be bundled and secured away from the electronics using tie mounts or protective sheaths. This prevents tangling, wear, and accidental disconnections during navigation.
Is the Navpod GP1040-17 SystemPod suitable for DIY installation?
Absolutely. The GP1040-17 is a popular choice among DIY boat owners due to its pre-cut face, included mounting hardware, and easy-to-follow instructions. Installation can be completed in under an hour with common tools. However, to ensure maximum waterproofing and safety, always double-check cable gland tightness and gasket positioning. For boaters who prefer expert help, professional installers can also integrate this pod with complex marine electronics systems.
Conclusion
The Navpod GP1040-17 SystemPod for Raymarine AXIOM 9 offers one of the most reliable and secure mounting solutions for marine electronics. Its weatherproof design, durable construction, and precision fit make it a favorite among both professional installers and DIY boaters. If you want to protect your navigation system and maintain a clean, modern helm station, this SystemPod is a smart and lasting investment.
Special Offer
WELCOME5 – Get 5% off storewide at allboatsupplies.com
🚀 Instant Assistance: Need help selecting the right product? Drop your contact in the chatbox at the bottom right corner, and our expert team will reply within 30 minutes with the best product suggestion for your boat — including a ready-to-use checkout link. We’re fast, knowledgeable, and always here for your boating needs!
No more guesswork — just message us and get a personalized checkout link for your antifouling system, fast!
Explore Our Best-Selling Ultrasonic Antifouling Products:
Buy now
Navpod GP1040-17 SystemPod for Raymarine AXIOM 9
Let us handle the hassle — expert support, quick replies, and smooth checkout. Your boat deserves the best.