Lexor – Evinrude/Johnson/OMC (15.75 x 15″) Solas RH Propeller, 2571-158-15
Introduction
The Lexor – Evinrude/Johnson/OMC (15.75 x 15″) Solas RH Propeller, 2571-158-15 marine propeller is a premium right-hand rotating stainless steel unit designed to enhance your boating experience. Specifically engineered for compatibility with Evinrude, Johnson, and OMC outboard engines, this propeller combines durability, performance, and precise craftsmanship. Whether you’re upgrading for speed, efficiency, or ruggedness, this build stands out in the stainless steel propellers market.
At its core, the Lexor Evinrude propeller marine offers accelerated planing, improved top-end performance, and greater responsiveness. From leisure cruises to fishing expeditions, this propeller delivers a balanced blend of thrust and efficiency.
Overview / What Is Lexor – Evinrude 15.75 x 15″ Solas RH Propeller?
The Lexor Evinrude propeller marine model 2571-158-15 is a 3-blade right-hand (RH) rotating propeller with a 15.75-inch diameter and a 15-inch pitch. Designed to optimize mid-range to high RPM performance on Evinrude, Johnson, and OMC outboard engines, the stainless steel construction ensures maximum strength and resistance to abrasion.
Featuring a polished finish and precision engineering, this propeller minimises thrust loss and cavitation. Its blade geometry is tailored for smooth acceleration and reduced fuel consumption, making it a reliable choice within the stainless steel propellers category.
- Compatible with 90–150 HP Evinrude/Johnson/OMC engines
- Durable stainless steel build resists impact & corrosion
- High rake blade design for improved efficiency
- RH rotation ideal for single-engine setups
How to Install Lexor Evinrude Propeller for Marine Use
Installing the Lexor Evinrude propeller marine is straightforward but requires attention to detail. Start by ensuring your engine is off and the prop shaft is debris-free. Remove any existing propeller, clean the shaft, and inspect your spline and thrust washer.
Apply marine-grade grease, align the propeller properly with the keyway, tighten the prop nut to manufacturer specifications, and insert the cotter pin. Proper torque ensures the propeller remains secure under load. Always consult your engine manual for exact specifications and follow torque guidelines.
Maintenance Tips
Maintaining the Lexor Evinrude propeller marine ensures long life and peak performance. After every outing, rinse with freshwater—especially after saltwater exposure—to prevent corrosion.
- Inspect blades for dings, warping, or fishing line entanglements
- Check prop shaft spline and thrust washer regularly
- Grease prop shaft every 30–40 engine hours
- Store propeller in a dry, safe location during off-season
Consistent maintenance helps avoid damage and preserves performance, reducing downtime and replacement costs.
Best Lexor Propeller Options for Evinrude/Johnson/OMC Engines
While the Lexor 15.75 x 15″ Solas RH propeller is ideal for mid-range horsepower and general boating, you might consider alternatives based on your boating needs:
- Lexor 15 x 17″ RH: Better top speed and fuel efficiency for sport boating
- Lexor 16 x 13″ RH: Enhanced torque and acceleration for heavier loads or wakeboarding
- Lexor 14.5 x 18″ RH: Balanced option for mixed boating conditions and engine power ranges
Choosing the best Lexor propeller depends on your boat type, engine HP, and usage patterns. Consider consulting a marine expert to match pitch and diameter to your engine PSI/RPM specs.
Lexor Evinrude Propeller Troubleshooting Tips
Even high-quality stainless steel propellers like the Lexor Evinrude 2571-158-15 can face performance issues. Recognizing these problems early ensures longevity and safety.
Common issues include:
- Vibration at mid-range RPMs (blade damage or misalignment)
- Poor plane performance (pitch mismatch or bent blades)
- Ventilation or cavitation (shaft height or damaged housing)
- Fuel inefficiency (internal engine issues or prop condition)
Proper troubleshooting includes visual inspection, pressure testing engine RPMs, measuring engine PSI, and comparing performance to baseline specs. When unsure, consult a certified marine technician.
Expert Advice and Pro Recommendations
Marine pros recommend selecting the Lexor Evinrude propeller marine model 2571-158-15 for consistent performance across moderate to high HP engines. The stainless steel construction ensures reliability in harsh marine environments.
Always pair your propeller choice with your engine’s power curve and your boat’s weight. For mixed-use boating—traction, leisure, towing—precision pitching matters. Adjust your pitch choice if you notice RPM deviations from your engine’s recommended range.
Buy now with confidence:
Lexor – Evinrude/Johnson/OMC (15.75 x 15″) Solas RH Propeller, 2571-158-15 and enjoy a 5% discount using code WELCOME5.
Detailed FAQ Section
How to install the Lexor Evinrude 2571-158-15 propeller?
Installing the Lexor Evinrude propeller marine is easy with careful steps. First, shut off your engine, remove the existing propeller, and clean the shaft. Check your spline and thrust washer. Apply marine grease to the shaft to reduce wear. Align the propeller with the key and cable spline. Secure tightly using a torque wrench as per your engine manual—typically between 60–80 ft-lb. Finally, insert a cotter pin to prevent loosening, trim excess, and ensure your engine is running smoothly before heading out. Regular checks in transit help confirm installation success and prevent propeller loss.
What boats are suited for this propeller?
The Lexor Evinrude 15.75 x 15″ Solas RH propeller fits best on boats with mid-level horsepower, roughly 90–150 HP. Ideal candidates include bass boats, small cruisers, pontoons, and fishing rigs. With its balanced pitch, it offers smooth acceleration and planing on lightweight to medium hulls. If you have heavier craft or frequent waterski needs, consider a different pitch such as the 16 x 13 or 14.5 x 18 variant. Always confirm compatibility by matching engine output and propeller schematic to avoid engine strain and performance loss.
How to repair bent or damaged blades?
Bent or dinged blades can drastically impact boat handling and efficiency. For the Lexor Evinrude propeller marine, minor bends may be straightened professionally; stainless steel tolerates reshaping better than aluminum. However, deep cracks or missing sections require replacement. Always inspect after any impact, and check the shaft spline. Neglecting bent blades can cause vibration, engine stress, cavitation issues, and damage to seals. For repairs, consult a certified propeller repair service familiar with Solas models.
What is the cost and durability of this propeller?
The Lexor Evinrude propeller marine offers competitive value compared to similar stainless steel options, typically priced between $450–600 USD. Given stainless steel’s strength, expect significantly longer service life versus aluminum props. With proper maintenance—cleaning, greasing, storage—it can remain in prime condition for many boating seasons. When analyzing cost windows, consider long-term savings through enhanced fuel efficiency and fewer replacements. The initial investment is justified by top-tier performance and corrosion resistance.
How can I troubleshoot RPM and cavitation issues?
RPM irregularities or cavitation usually indicate pitch mismatch or incorrect mounting height. If your engine revs higher than spec but speed lags, try a higher pitch propeller. Conversely, low RPM may mean a pitch too large for your engine. Cavitation—bubbles under high throttle—often stems from too many trims or damage to blades/housing. Ensure the Lexor Evinrude propeller marine is installed per OEM spec, check blade alignment, and inspect for debris. If cavitation persists, lower pitch or realign prop assembly. Regular inspection minimizes unexpected performance dips.
Conclusion
The Lexor – Evinrude/Johnson/OMC (15.75 x 15″) Solas RH Propeller, 2571-158-15 is a reliable, high-performance stainless steel propeller designed to elevate your boating experience. With top-notch construction, easy maintenance, and expert-approved performance, it’s a standout in the stainless steel propellers category. Ideal for boaters seeking fuel efficiency, durability, and smooth handling.
Upgrade today and enjoy improved thrust, enhanced fuel economy, and reduced wear—making every outing more efficient and enjoyable.
Special Offer
WELCOME5 – Get 5% off storewide at allboatsupplies.com
🚀 Instant Assistance: Need help selecting the right product? Drop your contact in the chatbox at the bottom right corner, and our expert team will reply within 30 minutes with the best product suggestion for your boat — including a ready-to-use checkout link. We’re fast, knowledgeable, and always here for your boating needs!
No more guesswork — just message us and get a personalized checkout link for your antifouling system, fast!
Explore Our Best-Selling Ultrasonic Antifouling Products:
Buy now
Lexor – Evinrude/Johnson/OMC (15.75 x 15″) Solas RH Propeller, 2571-158-15
Let us handle the hassle — expert support, quick replies, and smooth checkout. Your boat deserves the best.