Lexor – Evinrude/Johnson/OMC (15.25 x 19″) Solas RH Propeller, 2571-153-19
Introduction
The Lexor – Evinrude/Johnson/OMC (15.25 x 19″) Solas RH Propeller, 2571-153-19 stands as one of the most reliable, performance-focused, and precision-engineered propellers on the market today. Crafted from high-quality stainless steel, this Lexor Solas propeller marine edition is built for boaters who demand durability, speed, and control from their propulsion systems. Whether you’re out cruising, fishing, or pushing for performance in rough conditions, this propeller guarantees an upgrade in handling and efficiency.
Backed by years of trusted marine innovation, the Solas RH Propeller for Evinrude, Johnson, and OMC engines is more than just a replacement — it’s a long-term investment in the performance and safety of your vessel. Its 15.25 x 19″ sizing delivers a powerful thrust balance, ensuring minimal cavitation and excellent mid-range acceleration for marine engines.
Overview / What Is Lexor Solas Propeller Marine
This high-performance Solas RH Propeller is part of the Lexor series, designed specifically for compatibility with Evinrude, Johnson, and OMC outboard engines. With a right-hand rotation and exact dimensions of 15.25 x 19 inches, this marine propeller is crafted using high-grade stainless steel that resists corrosion and delivers improved strength over aluminum alternatives.
Perfect for a wide range of boating activities, this propeller supports better fuel economy, enhanced hole shot, and a smoother ride overall. It’s designed with precision blade geometry to optimize water flow and reduce slippage during propulsion.
Key Features of the 2571-153-19 Lexor Solas Propeller
- Size & Pitch: 15.25” diameter with 19” pitch – a balanced setup for speed and torque.
- Material: High-polish stainless steel for marine-grade corrosion resistance.
- Design: Three-blade configuration with precision-cast edges for optimal water displacement.
- Fitment: Compatible with select Evinrude, Johnson, and OMC engines.
- Rotation: Right-hand (RH), ideal for single engine setups.
Why Choose a Stainless Steel Propeller Over Aluminum?
When comparing marine propeller materials, stainless steel offers clear advantages in strength, longevity, and performance. The Lexor Solas propeller marine model handles higher horsepower loads without flexing, ensuring consistent thrust delivery and long-term durability. This leads to smoother steering and reduced vibration during high-speed operation.
Additionally, stainless steel propellers are better suited for boats frequently operating in saltwater or rougher environments. The anti-corrosion properties of stainless steel help reduce wear over time, extending your engine’s lifecycle.
How to Install Lexor – Evinrude/Johnson/OMC Solas Propeller
Installing the 2571-153-19 Solas RH Propeller is straightforward but requires a few essential tools and safety measures:
- Disconnect the engine and place your boat on a trailer or lift it safely.
- Remove the cotter pin and propeller nut using a socket wrench.
- Slide the old propeller off the shaft carefully, checking for fishing line or debris.
- Grease the propeller shaft and install the new Lexor propeller.
- Secure with the thrust washer, prop nut, and new cotter pin.
Ensure you double-check alignment and spin freely without obstruction before testing on water.
Maintenance Tips
To ensure the longevity and peak performance of your Lexor Solas propeller marine, follow these maintenance best practices:
- Inspect the propeller regularly for dings, bends, and cracks.
- Remove the propeller every 20-30 hours of use to check for fishing line around the shaft.
- Apply marine-grade grease to the propeller shaft to prevent corrosion and seizing.
- Clean off salt residue using freshwater and mild soap after each outing.
- Store your boat with the engine tilted down to avoid water accumulation in the hub.
Following these tips helps prevent costly damage and ensures safe, efficient boating.
Expert Advice and Pro Recommendations
If you’re upgrading or replacing your marine propeller, always match the pitch and diameter to your engine specifications. The Lexor – Evinrude/Johnson/OMC (15.25 x 19″) Solas RH Propeller is a solid mid-range performer, ideal for achieving a balance between acceleration and top speed.
Marine mechanics also recommend checking engine RPM at full throttle after installing any new propeller. The goal is to keep your engine within the manufacturer’s recommended range (usually 4500–6000 RPM).
Buy now: Lexor – Evinrude/Johnson/OMC (15.25 x 19″) Solas RH Propeller, 2571-153-19 and enjoy an exclusive 5% OFF with code WELCOME5
Common Troubleshooting for Marine Propellers
Experiencing vibration, reduced top speed, or poor fuel efficiency? These may be signs your propeller needs service:
- Vibration at high speed: Check for bent blades or imbalance.
- Decreased top-end speed: Your pitch may be too low or engine over-revving.
- Cavitation: Damaged blades or improper installation may allow air into the water stream.
If you’re unsure about your current propeller setup, our expert marine team is just a message away to guide you with the best recommendations.
Detailed FAQ Section
What engines are compatible with the 2571-153-19 Lexor Solas propeller?
This Lexor Solas RH Propeller is compatible with a wide range of Evinrude, Johnson, and OMC outboard engines. It fits most models requiring a 15.25 x 19″ RH rotation stainless steel prop. Always consult your owner’s manual or contact our support to confirm compatibility before purchasing.
How do I choose between different propeller sizes?
Choosing the correct propeller involves balancing pitch and diameter to match your boat’s size, weight, and engine power. A higher pitch increases speed but requires more engine power, while a lower pitch offers faster acceleration. For most mid-sized recreational boats, 15.25 x 19″ is a versatile, balanced option.
Can I install this propeller myself?
Yes, if you have basic mechanical knowledge and tools like a socket wrench, cotter pin, and marine grease. Installation typically takes 20-30 minutes. Always ensure proper alignment and secure the propeller with the appropriate hardware. If in doubt, consult a marine technician.
How does stainless steel compare to aluminum propellers?
Stainless steel propellers like the Lexor Solas offer superior strength, durability, and resistance to corrosion. They handle higher horsepower better and maintain shape under load, resulting in better performance and fuel efficiency compared to aluminum propellers.
What’s the return policy and warranty for this product?
All Lexor Solas propellers sold at AllBoatSupplies.com come with a manufacturer warranty against defects. We also offer a 30-day hassle-free return policy if the item is unused and in original packaging. Reach out to our support team for quick assistance with returns or exchanges.
Conclusion
The Lexor – Evinrude/Johnson/OMC (15.25 x 19″) Solas RH Propeller, 2571-153-19 is a premium marine upgrade for boaters demanding reliable, high-performance propulsion. Built from stainless steel and engineered with precision, this propeller enhances speed, handling, and durability. Whether you’re upgrading an aging aluminum prop or optimizing for sport and recreation, the 2571-153-19 Lexor Solas propeller marine is a top-tier choice that delivers results.
Special Offer
WELCOME5 – Get 5% off storewide at allboatsupplies.com
🚀 Instant Assistance: Need help selecting the right product? Drop your contact in the chatbox at the bottom right corner, and our expert team will reply within 30 minutes with the best product suggestion for your boat — including a ready-to-use checkout link. We’re fast, knowledgeable, and always here for your boating needs!
No more guesswork — just message us and get a personalized checkout link for your antifouling system, fast!
Explore Our Best-Selling Ultrasonic Antifouling Products:
Buy now
Lexor – Evinrude/Johnson/OMC (15.25 x 19″) Solas RH Propeller, 2571-153-19
Let us handle the hassle — expert support, quick replies, and smooth checkout. Your boat deserves the best.
Read More
For more helpful marine maintenance guides, check out our article on Lexor – Evinrude/Johnson/OMC (15.5 x 17″) Solas RH Propeller, 2571-155-17.