Navpod GP2080 SystemPod – Best & Worst Aspects Revealed
Introduction
The Navpod GP2080 SystemPod is the go-to solution for marine enthusiasts looking for a professional, protective, and purpose-built installation pod for their electronic navigation systems. Whether you are a cruiser, racer, or offshore sailor, this rugged enclosure provides optimal protection for your valuable electronics while allowing clean and functional helm installations. Designed for a 12″ wide guard, this SystemPod is precision-engineered to accommodate multiple devices in one seamless setup.
SystemPods from Navpod have earned the trust of professionals and DIYers alike. Built with durability and functionality at its core, the Navpod GP2080 allows for easy viewing and operation of GPS and marine electronics while keeping them safe from water intrusion, UV rays, and general wear and tear. Its sleek design complements any helm station while also enabling customizable options for multiple brands and models.
Overview / What Is Navpod GP2080 SystemPod
The Navpod GP2080 SystemPod for 12″ wide guard is a pre-configured housing pod designed specifically to mount multiple marine electronics on the pedestal guard of a boat’s helm station. It is part of Navpod’s SystemPod series that is known for supporting flush-mounted multifunction displays (MFDs), GPS chartplotters, and engine monitors with professional-grade sealing and structural integrity.
This pod supports side-by-side installation of a 12-inch display along with additional instruments. It is manufactured using durable materials such as high-gloss acrylic capped ABS and features a double gasket waterproof seal. This ensures full protection against saltwater, UV damage, and thermal expansion.
Its compatibility with brands like Garmin, Simrad, Raymarine, and Furuno makes it a universal favorite. Plus, the included stainless-steel mounting hardware ensures it stands firm against harsh marine environments and constant helm movement.
Top Features of Navpod GP2080 SystemPod
The Navpod GP2080 SystemPod stands out due to its purpose-built structure and weatherproof design. Here are some of its most outstanding features:
- High-Impact Acrylic Capped ABS Material – Provides long-term UV protection and resistance against high-temperature exposure.
- Waterproof Seal – Dual gasket system for superior moisture protection against sea spray and rain.
- Pre-cut Faceplates – Simplifies installation with pre-aligned slots for popular 12-inch GPS and marine electronics.
- Stainless Steel Mounting Hardware – Marine-grade fasteners for rust resistance and prolonged usage.
- Customizable Setup – Option to install additional devices such as autopilot controls or engine monitoring systems.
These features make it the best choice for sailors who need a robust yet accessible installation pod for their critical navigation electronics.
Compatibility With Leading Marine Brands
The Navpod GP2080 SystemPod for 12″ wide guard offers cross-compatibility with a wide range of electronic brands. It supports a variety of models from industry leaders including:
- Garmin GPSMAP series (8412, 8612)
- Raymarine Axiom Pro 12 and E-series
- Simrad NSS12 and GO12 systems
- Furuno TZtouch2 12-inch models
This ensures seamless integration and installation without the need for additional modifications. The pre-cut configurations are precisely engineered, providing a plug-and-play solution for professionals and boat owners alike.
Maintenance Tips
Keeping your Navpod GP2080 SystemPod in excellent condition ensures a long-lasting and safe experience. Follow these maintenance guidelines:
- Clean Regularly: Wipe the surface with a microfiber cloth and mild soapy water to remove salt deposits and grime. Avoid harsh solvents.
- Inspect Gaskets: Periodically inspect the waterproof gaskets to ensure they are seated properly and free from damage or dry rot.
- Check Mounting Hardware: Retighten screws and bolts at least once a season to maintain structural integrity and avoid water ingress.
- UV Protection: Apply a marine-safe UV protectant on the surface every 3-6 months to keep the gloss finish intact.
Adhering to these simple yet effective steps ensures that your pod and electronics remain protected even in harsh conditions.
Expert Advice and Pro Recommendations
Marine experts consistently recommend the Navpod GP2080 SystemPod for 12″ wide guard due to its blend of protection, aesthetics, and ergonomic installation. If you’re mounting valuable electronics on your pedestal guard, waterproofing and proper orientation are non-negotiables—and the GP2080 offers both in one elegant package.
Navpod GP2080 SystemPod for 12″ wide guard is built for rugged performance and will accommodate your boating upgrades seamlessly. Use the 5% discount code WELCOME5 at checkout for added value.
How to Install Navpod GP2080 SystemPod
Installing the Navpod GP2080 SystemPod can be done with basic tools and some familiarity with marine electronics:
- Identify the mounting location on your 12″ pedestal guard and confirm fitment.
- Route cables and wiring through the guard’s internal pathways for a clean installation.
- Mount the pre-cut pod using included stainless hardware and secure the backing plate.
- Seal entry points using waterproof grommets or silicone if needed.
Installation usually takes 1–2 hours and instantly upgrades your helm’s look and functionality.
Navpod GP2080 SystemPod Cost and Durability
The price of the Navpod GP2080 SystemPod for 12″ wide guard typically ranges between $400–$550 depending on vendor and customizations. It offers excellent durability with an expected lifespan of over 8–10 years with proper care. Compared to cheaper, non-waterproof enclosures, the GP2080 offers unmatched performance and longevity.
For those who demand high-end electronics, this housing ensures complete protection and adds professional appeal to any cockpit or flybridge setup.
Detailed FAQ Section
Is the Navpod GP2080 SystemPod truly waterproof?
Yes, the Navpod GP2080 SystemPod for 12″ wide guard features a dual gasket waterproof seal system. The inner gasket seals tightly against the backplate, while the outer gasket compresses against the pod’s outer flange, preventing moisture and salt intrusion. This design is rated for extreme marine conditions and has been tested on offshore vessels, ensuring consistent performance even in downpours or high-seas spray.
How does the Navpod GP2080 enhance helm station aesthetics?
The GP2080 SystemPod has a polished, high-gloss finish that seamlessly blends with modern helm stations. Its sleek profile conceals cabling and offers a factory-finished appearance, elevating the overall look of your boat. It also adds structure to your console, presenting a cleaner and more professional helm environment. Pairing it with branded marine electronics transforms your cockpit into a high-tech command center.
Can I install multiple devices in the Navpod GP2080 SystemPod?
Absolutely. The Navpod GP2080 SystemPod for 12″ wide guard is specifically designed for dual or multiple device configurations. This means you can mount a GPS chartplotter alongside instruments like engine monitors, radar displays, or autopilot controllers. With a spacious interior and pre-cut faceplates, it offers ample room for even large-screen electronics without clutter.
What makes Navpod better than DIY enclosures?
Navpod products like the GP2080 are engineered for marine durability, waterproofing, and aesthetics. DIY enclosures often lack proper sealing, UV resistance, and fail under stress or vibration. The GP2080 is laboratory-tested and proven in real-world boating environments. Its integrated design also simplifies installation, saving time and effort while providing a professional finish. For anyone serious about marine navigation and electronic protection, Navpod is a superior choice.
Is it compatible with Yamaha electronics?
Yes. The Navpod GP2080 SystemPod is compatible with a wide array of marine electronics, including Yamaha command-link plus systems. Whether you are using a Yamaha gauge or integrated GPS/fishfinder combo, this pod provides the sealing, spacing, and durability required. Yamaha outboards and control systems pair well with the GP2080 due to its universal design and customizable layout.
Conclusion
The Navpod GP2080 SystemPod for 12″ wide guard stands as a benchmark for protective, professional-grade marine electronics enclosures. With waterproof construction, high-quality materials, and compatibility across brands, it offers value and peace of mind. Whether you’re navigating through coastal waters or heading offshore, this pod ensures that your helm is equipped for performance and durability.
Pair it with top marine systems like Garmin, Raymarine, Simrad, or Yamaha, and experience control and clarity at your fingertips. Invest once and safeguard your expensive electronics the smart way.
Special Offer
WELCOME5 – Get 5% off storewide at allboatsupplies.com
🚀 Instant Assistance: Need help selecting the right product? Drop your contact in the chatbox at the bottom right corner, and our expert team will reply within 30 minutes with the best product suggestion for your boat — including a ready-to-use checkout link. We’re fast, knowledgeable, and always here for your boating needs!
No more guesswork — just message us and get a personalized checkout link for your antifouling system, fast!
Explore Our Best-Selling Ultrasonic Antifouling Products:
Buy now
Navpod GP2080 SystemPod for 12″ wide guard
Let us handle the hassle — expert support, quick replies, and smooth checkout. Your boat deserves the best.
