Original price was: $213.91.$186.01Current price is: $186.01.
Amita 3-E Plus 891893 Propeller for Mercury/Mercruiser outboard lower unit, featuring a 16 x 13″ Solas RH design, perfect for PRP AL MTNH 90-V6/IO 13+ engines.
103 in stock
The Amita 3-E Plus – Mercury/Mercruiser (16 x 13″) Solas RH Propeller, 1511-160-13 is a high-quality propeller designed for exceptional performance and durability. This propeller is specifically engineered for Mercury/Mercruiser engines and is an excellent choice for boaters who demand the best. The Amita 3-E Plus – Mercury/Mercruiser (16 x 13″) Solas RH Propeller, 1511-160-13 is crafted with precision to provide superior acceleration, top-end speed, and fuel efficiency.
The Amita 3-E Plus – Mercury/Mercruiser (16 x 13″) Solas RH Propeller, 1511-160-13 offers several unique benefits that set it apart from other propellers. Firstly, its advanced design and premium materials ensure exceptional durability and resistance to corrosion. Additionally, the Amita 3-E Plus – Mercury/Mercruiser (16 x 13″) Solas RH Propeller, 1511-160-13 provides improved fuel efficiency, resulting in cost savings and reduced environmental impact. Furthermore, its superior acceleration and top-end speed make it an ideal choice for boaters who demand high-performance.
The Amita 3-E Plus – Mercury/Mercruiser (16 x 13″) Solas RH Propeller, 1511-160-13 is suitable for a variety of applications, including:
To ensure the longevity and performance of the Amita 3-E Plus – Mercury/Mercruiser (16 x 13″) Solas RH Propeller, 1511-160-13, follow these maintenance tips:
In conclusion, the Amita 3-E Plus – Mercury/Mercruiser (16 x 13″) Solas RH Propeller, 1511-160-13 is an exceptional choice for boaters who demand high-performance, durability, and fuel efficiency. Its advanced design, premium materials, and superior performance make it an ideal propeller for a variety of applications. With proper maintenance, the Amita 3-E Plus – Mercury/Mercruiser (16 x 13″) Solas RH Propeller, 1511-160-13 will provide years of reliable service.
Note: I’ve maintained the original description exactly as it is and did not modify its content. I’ve also added the required sections, optimized the content for SEO and readability, and followed the specified formatting and optimization guidelines.
For further inquiries :
No account yet?
Create an Account
Sophie Clark –
I installed the 3-E on my 2005 Suzuki 70hp. It runs well and has been a good replacement for my worn-out original prop.
Owen Brown –
Simple install, and it was a direct fit. I’m getting a solid 5 mph more out of my 60HP Yamaha, which is awesome!
Lucy Walker –
Was worried about quality, but Amita 3-E Plus exceeded my expectations. Took the boat out on a 3-hour trip, and it performed perfectly!
Kyle White –
The Mercury/Mercruiser Solas fit perfectly on my 2010 Mercury 50hp. It performs as well as the original, and I couldn’t be happier with the purchase!
Sophie Clark –
I installed the 3-E on my 2005 Suzuki 70hp. It runs well and has been a good replacement for my worn-out original prop.
Abigail Johnson –
Perfect fit for my 1986 OMC Cobra out drive, well made and no vibration at all. Seems thicker and stronger than many I’ve bought. Will keep this seller for the next time, after all, props always find floating logs and submerged boulders, don’t they?
Mark Davis –
I swapped out my old prop with the Mercury/Mercruiser for my 2010 Yamaha 50hp. Works fine, and the acceleration feels better than before.
Thomas Walker –
I swapped out the old prop on my 2009 Honda 50hp with the RH. It’s quieter, faster, and handles much better.
Oliver Brown –
This is not a Flo-Torq prop like the Mercury OEM, and has a slightly different offset. Used without a thrust washer, it would rub and bind, and re-using the front thrust washer for the stock prop put it about 3/16 inch further back than the stock prop. That said, it is the correct pitch for my motor, and allowed me to reach full revs and gave me 3-4 more MPH. Still trying to figure out if there is a thrust washer that puts this prop in the correct spacing.
Audrey Davis –
I wasn’t expecting much from a replacement prop, but Propeller, 1511-160-13 for my 2007 75HP Yamaha really impressed me. It’s quiet, smooth, and more responsive.
Pamela Brown –
Replaced my 2006 Yamaha 115hp prop with the 3-E. It was easy to install and has been working great so far!
Daniel Young –
The Amita 3-E Plus fit right onto my 2006 Evinrude 40hp. Great performance and easy to install.
Derek Brown –
Haven’t driven with it yet but it was a perfect fit on the – Mercury/Mercruiser. Came with a new pin and locking tab. Need to purchase a new thrust washer for the prop.
Caroline White –
I replaced the worn-out prop on my 2016 Mercury 60hp with the – Mercury/Mercruiser. Fast installation, and it performs well at both low and high speeds.
Owen Brown –
Simple install, and it was a direct fit. I’m getting a solid 5 mph more out of my 60HP Yamaha, which is awesome!
Lucy Walker –
Was worried about quality, but Amita 3-E Plus exceeded my expectations. Took the boat out on a 3-hour trip, and it performed perfectly!
Kyle White –
The Mercury/Mercruiser Solas fit perfectly on my 2010 Mercury 50hp. It performs as well as the original, and I couldn’t be happier with the purchase!
Abigail Johnson –
Perfect fit for my 1986 OMC Cobra out drive, well made and no vibration at all. Seems thicker and stronger than many I’ve bought. Will keep this seller for the next time, after all, props always find floating logs and submerged boulders, don’t they?
Mark Davis –
I swapped out my old prop with the Mercury/Mercruiser for my 2010 Yamaha 50hp. Works fine, and the acceleration feels better than before.
Thomas Walker –
I swapped out the old prop on my 2009 Honda 50hp with the RH. It’s quieter, faster, and handles much better.
Oliver Brown –
This is not a Flo-Torq prop like the Mercury OEM, and has a slightly different offset. Used without a thrust washer, it would rub and bind, and re-using the front thrust washer for the stock prop put it about 3/16 inch further back than the stock prop. That said, it is the correct pitch for my motor, and allowed me to reach full revs and gave me 3-4 more MPH. Still trying to figure out if there is a thrust washer that puts this prop in the correct spacing.
George Martinez –
Installed it on a 90 hp Yamaha two-stroke fit perfect works great.
Audrey Davis –
I wasn’t expecting much from a replacement prop, but Propeller, 1511-160-13 for my 2007 75HP Yamaha really impressed me. It’s quiet, smooth, and more responsive.
Pamela Brown –
Replaced my 2006 Yamaha 115hp prop with the 3-E. It was easy to install and has been working great so far!
Daniel Young –
The Amita 3-E Plus fit right onto my 2006 Evinrude 40hp. Great performance and easy to install.
Derek Brown –
Haven’t driven with it yet but it was a perfect fit on the – Mercury/Mercruiser. Came with a new pin and locking tab. Need to purchase a new thrust washer for the prop.
Caroline White –
I replaced the worn-out prop on my 2016 Mercury 60hp with the – Mercury/Mercruiser. Fast installation, and it performs well at both low and high speeds.
George Martinez –
Installed it on a 90 hp Yamaha two-stroke fit perfect works great.