PROP SST TN/H 60-130H19L
Introduction
When it comes to powering your vessel efficiently and reliably, choosing the right marine propeller makes all the difference. The PROP SST TN/H 60-130H19L for marine engines is a high-performance stainless steel propeller designed for optimum thrust, fuel efficiency, and durability in saltwater and freshwater environments alike. Whether you’re a recreational boater or a commercial marine operator, this propeller offers a versatile and dependable solution that ensures smooth sailing even in demanding conditions.
In this article, we’ll explore everything you need to know about the PROP SST TN/H 60-130H19L — from specs and benefits to expert maintenance tips and purchasing guidance.
Overview / What Is PROP SST TN/H 60-130H19L for Marine
The PROP SST TN/H 60-130H19L for marine is a premium-grade stainless steel propeller designed for boats with 60-130 horsepower outboard engines. Featuring a right-hand rotation and a 19-inch pitch, it provides excellent lift and efficiency across various hull types.
This propeller is part of the SST (Stainless Steel Thrust) series known for its precision casting, corrosion resistance, and ability to withstand high-speed performance. It’s commonly used for recreational fishing boats, pontoons, and performance craft that demand responsive handling and acceleration.
Technical Specifications and Key Features
The PROP SST TN/H 60-130H19L stands out for its design and construction features, which include:
- Material: Polished stainless steel for superior corrosion resistance
- Size: 13.25-inch diameter x 19-inch pitch
- Rotation: Right-hand
- Engine Fit: 60-130 HP outboards
- Hub System: Interchangeable for easy replacement
These features combine to create a propeller that’s optimized for speed, fuel economy, and long-term performance in both fresh and saltwater applications.
How to Install PROP SST TN/H 60-130H19L for Marine
Proper installation ensures you get the most out of your PROP SST TN/H 60-130H19L. Here are the steps to follow:
- Disconnect the ignition and place the engine in neutral.
- Remove the cotter pin, prop nut, and washers from the existing propeller.
- Slide the old propeller off the shaft carefully.
- Grease the shaft lightly and install the new PROP SST TN/H 60-130H19L, aligning it properly.
- Secure the prop with the included washer, nut, and cotter pin.
After installation, test run your engine to check for any vibration or alignment issues. If the propeller is not centered correctly, you may experience cavitation or decreased performance.
Benefits of Using Stainless Steel Marine Propellers
The material of your propeller can drastically affect your boating experience. Here’s why stainless steel, and especially the PROP SST TN/H 60-130H19L, is a top choice:
- Strength: Stainless steel is far more durable than aluminum, resisting impacts and flexing less under high RPMs.
- Performance: It allows for more precise blade geometry, which translates into smoother handling and better top-end speed.
- Longevity: It holds up better over time, especially in saltwater environments.
Choosing a stainless steel option like the PROP SST TN/H 60-130H19L means fewer replacements, better fuel economy, and a noticeable improvement in thrust and acceleration.
Maintenance Tips
To maintain the PROP SST TN/H 60-130H19L for marine and ensure its longevity, follow these maintenance guidelines:
- Regular Cleaning: Rinse the propeller with fresh water after each use to remove salt and debris.
- Inspect for Damage: Check for dents, cracks, or bent blades regularly.
- Grease Shaft: Apply marine grease to the propeller shaft every few uses to prevent seizing.
- Store Properly: When not in use, store your propeller in a dry and clean environment to avoid corrosion.
Routine maintenance not only extends the life of your propeller but also ensures peak performance and safety on the water.
Expert Advice and Pro Recommendations
Marine mechanics and propeller specialists highly recommend the PROP SST TN/H 60-130H19L for mid-range outboards due to its exceptional blade precision and resistance to flex. It’s ideal for boats that require smooth acceleration, especially when towing or cruising long distances.
Pro Tip: Pair this propeller with a performance trim tab to enhance fuel economy and control. Use code WELCOME5 at checkout to get an additional 5% off your order and experience premium marine propulsion at a reduced cost.
Troubleshooting PROP SST TN/H 60-130H19L Issues
If you experience reduced speed or excessive vibration, here are potential causes:
- Debris on blades: Remove and clean thoroughly.
- Bent blade: Replace immediately — do not attempt to bend back.
- Improper installation: Reinstall using a torque wrench to ensure proper pressure.
Regular checks and prompt repairs ensure smooth operation and prevent costly engine damage.
Best PROP SST TN/H 60-130H19L Alternatives
While the PROP SST TN/H 60-130H19L is a top-tier option, you might also consider these alternatives depending on your boat’s needs:
- Aluminum Propellers: More affordable but less durable.
- Composite Propellers: Lightweight, ideal for smaller boats.
- Four-Blade Props: Offer more lift and better for heavier boats.
Still, for a balance of power, durability, and efficiency, stainless steel props like the 60-130H19L remain unmatched.
Detailed FAQ Section
What is the pitch and why does it matter for PROP SST TN/H 60-130H19L?
The pitch of a propeller indicates how far it will move forward in one full rotation, assuming no slippage. For the PROP SST TN/H 60-130H19L, the 19-inch pitch means the propeller theoretically moves the boat forward 19 inches per revolution. This pitch is ideal for mid-speed performance and fuel efficiency, especially for 60-130 HP engines. Selecting the right pitch is crucial; a pitch that’s too high may result in sluggish acceleration, while one that’s too low could over-rev your engine. The 19L strikes a perfect balance for general boating needs.
How do I know if PROP SST TN/H 60-130H19L fits my boat?
Compatibility is determined by your engine’s horsepower and propeller hub type. The PROP SST TN/H 60-130H19L is designed for outboard motors ranging from 60 to 130 HP. You can find this information in your engine’s user manual or by checking with your boat manufacturer. Additionally, the hub system is usually interchangeable, so even if your current prop is a different brand, you may still be able to install this prop with the correct hub adapter.
How often should I replace the PROP SST TN/H 60-130H19L?
With proper maintenance, a stainless steel propeller like this one can last several years. However, factors such as frequent grounding, saltwater exposure, and lack of cleaning can shorten its life. Most boaters inspect and potentially replace their propellers every 3–5 years. If you notice performance issues, unusual vibration, or visible damage, it’s time to consider a replacement. Also, propellers used in commercial or frequent boating applications may require more frequent attention.
Is the PROP SST TN/H 60-130H19L good for saltwater use?
Absolutely. One of the main advantages of stainless steel propellers is their corrosion resistance, making the PROP SST TN/H 60-130H19L perfect for saltwater use. Unlike aluminum props, which can corrode rapidly in marine environments, stainless steel withstands the harsh effects of salt and marine growth much more effectively. Still, it’s essential to rinse your propeller with fresh water after each saltwater outing to maximize its lifespan.
What tools are needed to install the PROP SST TN/H 60-130H19L?
You’ll need a few basic tools to install this propeller:
- Prop wrench or socket wrench
- Marine grease
- Rubber mallet (optional)
- Replacement cotter pin (if damaged)
Be sure to follow the manufacturer’s torque specifications. If you’re unsure, consult a marine mechanic. Improper installation can cause engine damage or performance issues, so take your time and double-check your work before heading out on the water.
Conclusion
The PROP SST TN/H 60-130H19L for marine is a top-tier solution for boaters who want reliable, high-performance propulsion. Its stainless steel construction, 19-inch pitch, and compatibility with 60–130 HP engines make it versatile and efficient. Whether you’re upgrading from an aluminum prop or outfitting a new engine, this propeller offers unmatched durability and power.
Remember to maintain it properly, check for signs of wear, and use only approved installation techniques to enjoy a smooth and efficient boating experience for years to come.
Special Offer
WELCOME5 – Get 5% off storewide at allboatsupplies.com
🚀 Instant Assistance: Need help selecting the right product? Drop your contact in the chatbox at the bottom right corner, and our expert team will reply within 30 minutes with the best product suggestion for your boat — including a ready-to-use checkout link. We’re fast, knowledgeable, and always here for your boating needs!
No more guesswork — just message us and get a personalized checkout link for your antifouling system, fast!
Explore Our Best-Selling Ultrasonic Antifouling Products:
Buy now
Let us handle the hassle — expert support, quick replies, and smooth checkout. Your boat deserves the best.
Read More
For more helpful marine maintenance guides, check out our article on Johnson Evinrude OMC drive shaft 20B” Late 90 Degree Looper.